==>runtrx start: date: Mon Nov 18 13:50:58 EST 2024 ( mccune010.pppl.gov ) argv = 2 iarg = 2 cmd_opt = run runtrx: tok.yy = NSTX.10 ==========(runtrx)====================== date: Mon Nov 18 13:50:58 EST 2024 ( mccune010.pppl.gov ) args: 138506Z27 run ==========(runtrx)====================== ==========(runtrx)====================== ==========TRANSP link & load============ ==========(runtrx)====================== date: Mon Nov 18 13:50:58 EST 2024 ( mccune010.pppl.gov ) --> copy_expert_for: standard expert source copied to: 138506Z27ex.for --> copy_expert_for: up-to-date expert object copied to: 138506Z27ex.o **** uplink 138506Z27tr nolib check_xlibvars: setenv L_NAG (null) check_xlibvars: setenv L_MDESCR (null) check_xlibvars: setenv LMPI_FRANTIC(null) make: `/local/tr_bleard/transp_compute/NSTX/138506Z27/138506Z27ex.o' is up to date. csh -f /local/tr_bleard/transp_compute/NSTX/138506Z27/138506Z27tr.sh csh/linkload detected: C++ libraries requirement with f90 linkage ==>runtrx: TRANSP link successful ==========(runtrx)====================== ==========TRANSP execution============== date: Mon Nov 18 13:51:12 EST 2024 ( mccune010.pppl.gov ) ==========(runtrx)====================== runtrx: Check File System %trmpi_init.f90: LOG_LEVEL env. var.: 1 %trmpi_init.f90: logfile_level: warn !trmpi_init.f90 (rank 0): MAX_MPI_INT_BLOCK environment variable: undefined. D efault value will be used. !trmpi_init.f90 (rank 0): MAX_MPI_R8_BLOCK environment variable: undefined. De fault value will be used. %initcpl: MDS_CACHE enabled. ENTER TRANSP RUN ID, APPEND "R" FOR RESTART: %trmpi_openlog: LOGFILE_LEVEL = warn DATE: Mon Nov 18 13:51:12 2024 TRANSP Version: 24.0.1 TRANSP DOI: 10.11578/dc.20180627.4 Build Date: 2023/10/21 namelist element value field(s): decimal point(s) inserted: XRCNER XRCBOL FRMINI DTMINT DTMING XRCTER %NLIST: open namelist file138506Z27TR.ZDA %trcom_static_box: loading static data %trgdat: NLBCCW= F from PH.CDF file %trgdat: NLJCCW= T from PH.CDF file %trcom_allocate: reallocate: RLIM_PTS %trcom_allocate: reallocate: YLIM_PTS %trgdat: NMOM= 16 %trmpi_set_numprocs: serial TRANSP w/MPI subprocess numprocs= 1. from translation of env. var. "TRANSP_NPROCS". env. var. character value: " 1". ************************** **** TRANSP SERIAL MODE: **** ************************** %datchk: time dependent output resolution (sedit,stedit vs. time: "DTX") detected. %datchk: time dependent geometry timestep (dtmaxg vs. time: "DTG") detected. %datchk: time dependent source timestep (dt_sources vs. time: "DTS") detected. %DATCHK: full equilibrium input DATCHK: CHECKING ARRAY DIMENSIONS, SWITCHES, ETC %DATCHK: NYXINV incremented to be odd: 101 161 %DATCHK: no ECH/ECCD, NLECH=F, %DATCHK: no Lower Hybrid, NLLH=F %DATCKICH: TORIC-5 solver, with numerical MHD equilibrium geometry. %DATCHK: old style ICH antenna geometry converted: RmjIcha,rmnIcha,thIcha -> RgeoAnt,YgeoAnt ONLY element (1) of each array used! %DATCKICH: copy shared parameters to Antenna # 1 %datckich: RF antenna i= 1 non-symmetric Nphi spectrum detected. %datckich for TORIC5: reset NICHCHI from 256 to 64 %datckich for TORIC5: increased NICHPSI from 200 to 320 %DATCKA: ACfile times pre-screen... %DATCKA -- CHECKING NON-DEFAULT SPECIFICATIONS FOR AC FILE I/O GIVEN IN NAMELIST CHARACTER DATA ARRAYS "SELOUT" AND "SELAVG" %ASCXFIN -- AC FILE OPERATION COMPLETED SUCCESSFULLY. %LH_ONOFF: LH on/off times (s): 1.5500E-01 4.7580E-01 %EC_ONOFF: no ECH on/off times found. %icrf_onoff: antenna on/off times defaulted, reset to generic ICRF on/off times: TCRFON, TCRFOF: %ICRF_ONOFF: ICRF on/off times (s): 1.0000E-01 5.0000E-01 %NB_ONOFF: no NBI on/off times found. ps_init_tag: Plasma State v3.000 f90 module initialization. AUXVAL-- INITITIALIZE shared data structures. %DATCKA: ACfile times pre-screen... arrays allocated in pt_diff_data_init arrays allocated in ptsolver_data_init MCINIT: RANDOM NUMBER GEN INITIALIZED - 997456385 997456385 %tabort_update: no namelist TABORT requests after t= 0.110000000000000 AUXVAL-- INITIALIZE PLOTTING OUTPUT SYSTEM AUXVAL-- INITIALIZE TEMPERATURE AND DENSITY PROFILES AUXVAL-- GEOMETRY INITIALIZATION PART 2. GFRAM0: bdy curvature ratio OK at t= 1.1500E-01 seconds: 1.7201E-01 GFRAM0: bdy curvature ratio OK at t= 1.1000E-01 seconds: 1.9285E-01 % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 %treqbox_init_tr: clearing eqbox and loading tr attributes %treqbox_init_psirz: loading iso attributes for isolver psi(R,Z) analysis * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.4080E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.9285E-01 %get_rygrid: no grids for Psi(R,Y) %get_rygrid: no grids for Psi(R,Y) %tdb_profin: t%rmajmp and input data major radius grids not matched: R1(t%rmajmp, data): 18.5198778894376 18.5160815380531 R2(t%rmajmp, data): 153.013373343732 149.745971766156 (fixup applied). %tdb_profin: t%rmajmp and input data major radius grids not matched: R1(t%rmajmp, data): 18.5198778894376 18.5160815380531 R2(t%rmajmp, data): 153.013373343732 149.745971766156 (fixup applied). %tdb_profin: t%rmajmp and input data major radius grids not matched: R1(t%rmajmp, data): 18.5198778894376 18.5160815380531 R2(t%rmajmp, data): 153.013373343732 149.745971766156 (fixup applied). %tdb_profin: t%rmajmp and input data major radius grids not matched: R1(t%rmajmp, data): 18.5198778894376 18.5160815380531 R2(t%rmajmp, data): 153.013373343732 149.745971766156 (fixup applied). %tdb_profin: t%rmajmp and input data major radius grids not matched: R1(t%rmajmp, data): 18.5198778894376 18.5160815380531 R2(t%rmajmp, data): 153.013373343732 149.745971766156 (fixup applied). dmg_datbuf_expand call from dmgini_sized: isize= 0 ...reading TF.PLN header data... ----------------------- %frantic_sorce1 -- resolution increased: previous: 20 ; now: 50 minimum resolution = min(50,nzones) ----------------------- *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 1.00000E-02 CPU TIME= 2.39350E-02 SECONDS. DT= 1.00000E-03 %INITAL: pseudo time advanced to 1.100000E-02 %INITAL: pseudo time advanced to 1.225000E-02 %INITAL: pseudo time advanced to 1.381250E-02 %INITAL: pseudo time advanced to 1.576562E-02 %INITAL: pseudo time advanced to 1.820703E-02 %INITAL: pseudo time advanced to 2.125879E-02 %INITAL: pseudo time advanced to 2.507349E-02 %INITAL: pseudo time advanced to 2.984186E-02 %INITAL: pseudo time advanced to 3.479186E-02 % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6610E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.9285E-01 %get_rygrid: no grids for Psi(R,Y) % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.2470E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.7201E-01 %get_rygrid: no grids for Psi(R,Y) *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 3.47919E-02 CPU TIME= 1.31790E-02 SECONDS. DT= 4.95000E-03 %INITAL: pseudo time advanced to 3.974186E-02 %INITAL: pseudo time advanced to 4.469186E-02 %INITAL: pseudo time advanced to 4.964186E-02 %INITAL: pseudo time advanced to 5.459186E-02 % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.2190E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.9285E-01 %get_rygrid: no grids for Psi(R,Y) % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5190E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.7201E-01 %get_rygrid: no grids for Psi(R,Y) *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 5.45919E-02 CPU TIME= 1.32040E-02 SECONDS. DT= 4.95000E-03 %INITAL: pseudo time advanced to 5.954186E-02 %INITAL: pseudo time advanced to 6.449186E-02 %INITAL: pseudo time advanced to 6.944186E-02 %INITAL: pseudo time advanced to 7.439186E-02 % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.2350E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.9285E-01 %get_rygrid: no grids for Psi(R,Y) % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.2910E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.7201E-01 %get_rygrid: no grids for Psi(R,Y) *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 7.43919E-02 CPU TIME= 1.33820E-02 SECONDS. DT= 4.95000E-03 %INITAL: pseudo time advanced to 7.934186E-02 %INITAL: pseudo time advanced to 8.429186E-02 %INITAL: pseudo time advanced to 8.924186E-02 %INITAL: pseudo time advanced to 9.419186E-02 % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.0270E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.9285E-01 %get_rygrid: no grids for Psi(R,Y) % MHDEQ: TG1= 0.110000 ; TG2= 0.115000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.2730E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.7201E-01 %get_rygrid: no grids for Psi(R,Y) *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 9.41919E-02 CPU TIME= 1.32140E-02 SECONDS. DT= 4.95000E-03 %INITAL: pseudo time advanced to 9.914186E-02 %INITAL: pseudo time advanced to 1.040919E-01 %INITAL: pseudo time advanced to 1.090419E-01 sce_equil_init: Equilibration feature not active (noption_equil <= 0 in namelist). %tr_rfprep: rfxqlo setup done, cpu(s) = 1.65205700000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1 TA= 1.10000E-01 CPU TIME= 1.32610E-02 SECONDS. DT= 4.95000E-03 %check_save_state: SLURM_JOB_ID = 6707356 %check_save_state: QSHARE= /p/transpgrid/qshare %check_save_state: nbflag = T %check_save_state: iwrite_now = T %check_save_state: check at wall_hours = 6.578333333891351E-003 %check_save_state: izleft hours = 15.9750000000000 %wrstf: start call wrstf. %wrstf: open new restart file:138506Z27RS.DAT %wrstf: open138506Z27RS.DAT_NEW, status= 0 %wrstf: record, ier= 1 (ier=1, OK) %wrstf: psload_save %ps_rezone_chk: no rezone operator available (no MHD equilibrium). %ps_rezone_chk: no rezone operator available (no MHD equilibrium). %wrstf: write marker file. %wrstf: transp_rplot_state_backup % RESTART RECORD WRITTEN AT TA= 1.1000000E-01 arrays allocated in pt_diff_data_init arrays allocated in ptsolver_data_init %WRSTF: virtual memory size = 1.310E+03 MB. --> plasma_hash("gframe"): TA= 1.100000E-01 NSTEP= 1 Hash code: 40603965 ->PRGCHK: bdy curvature ratio at t= 1.1250E-01 seconds is: 1.8381E-01 % MHDEQ: TG1= 0.110000 ; TG2= 0.112500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4290E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.8381E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.110000 TO TG2= 0.112500 @ NSTEP 1 GFRAME TG2 MOMENTS CHECKSUM: 9.1511262718595D+03 GASFL called from sbrtn pbal GASFL called from sbrtn pbal GASFL called from sbrtn pbal GASFL called from sbrtn pbal GASFL called from sbrtn pbal GASFL called from sbrtn pbal %nclass_geometry: Allocating module variables %nclass_geometry_mod: replacing geometry module variables in the ncbox %nclass_driver: Allocating module variables %nclass_driver_mod: replacing geometry module variables in the ncbox %nclass_geometry: Deallocating module variables %nclass_geometry: Allocating module variables %nclass_geometry_mod: replacing geometry module variables in the ncbox %nclass_driver: Deallocating module variables %nclass_driver: Allocating module variables %nclass_driver_mod: replacing geometry module variables in the ncbox %MFRCHK - LABEL "BALE0_SGF", # 49= -2.55775E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= -2.55775E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 48= -1.47141E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 48= -1.47141E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.125000E-01 NSTEP= 2 Hash code: 37672044 ->PRGCHK: bdy curvature ratio at t= 1.1500E-01 seconds is: 1.7201E-01 % MHDEQ: TG1= 0.112500 ; TG2= 0.115000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6390E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.7201E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.112500 TO TG2= 0.115000 @ NSTEP 2 GFRAME TG2 MOMENTS CHECKSUM: 9.0756918023818D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 2 TA= 1.12500E-01 CPU TIME= 1.44850E-02 SECONDS. DT= 2.50000E-03 %MFRCHK - LABEL "BALE0_SGF", # 46= 1.43916E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.43916E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 46= 1.46738E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 46= 1.46738E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69448100000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 3 TA= 1.15000E-01 CPU TIME= 1.32220E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 1.427611111148508E-002 %check_save_state: izleft hours = 15.9672222222222 --> plasma_hash("gframe"): TA= 1.150000E-01 NSTEP= 3 Hash code: 95528738 ->PRGCHK: bdy curvature ratio at t= 1.1750E-01 seconds is: 1.8529E-01 % MHDEQ: TG1= 0.115000 ; TG2= 0.117500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5390E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.8529E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.115000 TO TG2= 0.117500 @ NSTEP 3 GFRAME TG2 MOMENTS CHECKSUM: 9.0308490647345D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= -1.99982E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= -1.99982E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.175000E-01 NSTEP= 4 Hash code: 60384645 ->PRGCHK: bdy curvature ratio at t= 1.2000E-01 seconds is: 1.9994E-01 % MHDEQ: TG1= 0.117500 ; TG2= 0.120000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7820E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.9994E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.117500 TO TG2= 0.120000 @ NSTEP 4 GFRAME TG2 MOMENTS CHECKSUM: 8.9860063270872D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= -2.03015E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= -2.03015E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69202500000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 5 TA= 1.20000E-01 CPU TIME= 1.34020E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 2.150444444441746E-002 %check_save_state: izleft hours = 15.9600000000000 --> plasma_hash("gframe"): TA= 1.200000E-01 NSTEP= 5 Hash code: 74002130 ->PRGCHK: bdy curvature ratio at t= 1.2500E-01 seconds is: 2.1723E-01 % MHDEQ: TG1= 0.120000 ; TG2= 0.125000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5980E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.1723E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.120000 TO TG2= 0.125000 @ NSTEP 5 GFRAME TG2 MOMENTS CHECKSUM: 8.9487914986134D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= 1.31597E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.31597E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= 1.32810E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.32810E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.96839000000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 7 TA= 1.25000E-01 CPU TIME= 1.50180E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 2.801583333348390E-002 %check_save_state: izleft hours = 15.9536111111111 --> plasma_hash("gframe"): TA= 1.250000E-01 NSTEP= 7 Hash code: 73654007 ->PRGCHK: bdy curvature ratio at t= 1.2750E-01 seconds is: 2.1518E-01 % MHDEQ: TG1= 0.125000 ; TG2= 0.127500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9240E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.1518E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.125000 TO TG2= 0.127500 @ NSTEP 7 GFRAME TG2 MOMENTS CHECKSUM: 8.9411350539644D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -1.39441E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.39441E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.275000E-01 NSTEP= 8 Hash code: 92119467 ->PRGCHK: bdy curvature ratio at t= 1.3000E-01 seconds is: 2.1258E-01 % MHDEQ: TG1= 0.127500 ; TG2= 0.130000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5800E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.1258E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.127500 TO TG2= 0.130000 @ NSTEP 8 GFRAME TG2 MOMENTS CHECKSUM: 8.9334786093154D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -1.39751E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.39751E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69387300000001 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 9 TA= 1.30000E-01 CPU TIME= 1.32580E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 3.484916666639037E-002 %check_save_state: izleft hours = 15.9466666666667 --> plasma_hash("gframe"): TA= 1.300000E-01 NSTEP= 9 Hash code: 56803368 ->PRGCHK: bdy curvature ratio at t= 1.3250E-01 seconds is: 2.1878E-01 % MHDEQ: TG1= 0.130000 ; TG2= 0.132500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5220E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.1878E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.130000 TO TG2= 0.132500 @ NSTEP 9 GFRAME TG2 MOMENTS CHECKSUM: 8.9474756534773D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -5.40009E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -5.40009E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.325000E-01 NSTEP= 10 Hash code: 49364545 ->PRGCHK: bdy curvature ratio at t= 1.3500E-01 seconds is: 2.1302E-01 % MHDEQ: TG1= 0.132500 ; TG2= 0.135000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4860E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.1302E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.132500 TO TG2= 0.135000 @ NSTEP 10 GFRAME TG2 MOMENTS CHECKSUM: 8.9614726976391D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -5.36915E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -5.36915E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.95578700000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 11 TA= 1.35000E-01 CPU TIME= 1.48610E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 4.115305555615123E-002 %check_save_state: izleft hours = 15.9402777777778 --> plasma_hash("gframe"): TA= 1.350000E-01 NSTEP= 11 Hash code: 101754546 ->PRGCHK: bdy curvature ratio at t= 1.3750E-01 seconds is: 2.1134E-01 % MHDEQ: TG1= 0.135000 ; TG2= 0.137500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0180E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.1134E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.135000 TO TG2= 0.137500 @ NSTEP 11 GFRAME TG2 MOMENTS CHECKSUM: 8.9993101448396D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.60792E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.60792E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.375000E-01 NSTEP= 12 Hash code: 1734108 ->PRGCHK: bdy curvature ratio at t= 1.4000E-01 seconds is: 2.0971E-01 % MHDEQ: TG1= 0.137500 ; TG2= 0.140000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4490E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.0971E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.137500 TO TG2= 0.140000 @ NSTEP 12 GFRAME TG2 MOMENTS CHECKSUM: 9.0371475920402D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.59086E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.59086E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.70033899999999 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 13 TA= 1.40000E-01 CPU TIME= 1.33340E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 4.753416666608246E-002 %check_save_state: izleft hours = 15.9338888888889 --> plasma_hash("gframe"): TA= 1.400000E-01 NSTEP= 13 Hash code: 42251061 ->PRGCHK: bdy curvature ratio at t= 1.4250E-01 seconds is: 2.1065E-01 % MHDEQ: TG1= 0.140000 ; TG2= 0.142500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5130E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.1065E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.140000 TO TG2= 0.142500 @ NSTEP 13 GFRAME TG2 MOMENTS CHECKSUM: 9.0579943392551D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 1.53754E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.53754E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.425000E-01 NSTEP= 14 Hash code: 76377627 ->PRGCHK: bdy curvature ratio at t= 1.4500E-01 seconds is: 2.1012E-01 % MHDEQ: TG1= 0.142500 ; TG2= 0.145000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.2730E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.1012E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.142500 TO TG2= 0.145000 @ NSTEP 14 GFRAME TG2 MOMENTS CHECKSUM: 9.0788410864700D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 1.51881E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.51881E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.97521999999998 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 15 TA= 1.45000E-01 CPU TIME= 1.46270E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 5.395250000037777E-002 %check_save_state: izleft hours = 15.9275000000000 --> plasma_hash("gframe"): TA= 1.450000E-01 NSTEP= 15 Hash code: 31805094 ->PRGCHK: bdy curvature ratio at t= 1.4750E-01 seconds is: 1.8686E-01 % MHDEQ: TG1= 0.145000 ; TG2= 0.147500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9980E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.8686E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.145000 TO TG2= 0.147500 @ NSTEP 15 GFRAME TG2 MOMENTS CHECKSUM: 9.1770656987634D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -2.94001E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.94001E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.475000E-01 NSTEP= 16 Hash code: 11966451 ->PRGCHK: bdy curvature ratio at t= 1.5000E-01 seconds is: 1.6696E-01 % MHDEQ: TG1= 0.147500 ; TG2= 0.150000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4920E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.6696E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.147500 TO TG2= 0.150000 @ NSTEP 16 GFRAME TG2 MOMENTS CHECKSUM: 9.2752903110568D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -2.86456E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.86456E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69366300000002 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 17 TA= 1.50000E-01 CPU TIME= 1.33350E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 6.063222222246623E-002 %check_save_state: izleft hours = 15.9208333333333 --> plasma_hash("gframe"): TA= 1.500000E-01 NSTEP= 17 Hash code: 25141708 ->PRGCHK: bdy curvature ratio at t= 1.5250E-01 seconds is: 1.4340E-01 % MHDEQ: TG1= 0.150000 ; TG2= 0.152500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4920E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.4340E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.150000 TO TG2= 0.152500 @ NSTEP 17 GFRAME TG2 MOMENTS CHECKSUM: 9.3371922204613D+03 %MFRCHK - LABEL "BALE0_SGF", # 50= 3.58980E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 50= 3.58980E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.525000E-01 NSTEP= 18 Hash code: 15193515 ->PRGCHK: bdy curvature ratio at t= 1.5500E-01 seconds is: 1.2285E-01 % MHDEQ: TG1= 0.152500 ; TG2= 0.155000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5310E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.2285E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.152500 TO TG2= 0.155000 @ NSTEP 18 GFRAME TG2 MOMENTS CHECKSUM: 9.3990941298658D+03 %MFRCHK - LABEL "BALE0_SGF", # 50= 3.51379E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 50= 3.51379E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.95601300000001 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 19 TA= 1.55000E-01 CPU TIME= 1.47160E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 6.747499999983120E-002 %check_save_state: izleft hours = 15.9141666666667 --> plasma_hash("gframe"): TA= 1.550000E-01 NSTEP= 19 Hash code: 89869893 ->PRGCHK: bdy curvature ratio at t= 1.5750E-01 seconds is: 9.8869E-02 % MHDEQ: TG1= 0.155000 ; TG2= 0.157500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8400E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 9.8869E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.155000 TO TG2= 0.157500 @ NSTEP 19 GFRAME TG2 MOMENTS CHECKSUM: 9.4287717372542D+03 %MFRCHK - LABEL "BALE0_SGF", # 50= -3.13102E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 50= -3.13102E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.575000E-01 NSTEP= 20 Hash code: 50007430 ->PRGCHK: bdy curvature ratio at t= 1.6000E-01 seconds is: 7.8546E-02 % MHDEQ: TG1= 0.157500 ; TG2= 0.160000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4860E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.8546E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.157500 TO TG2= 0.160000 @ NSTEP 20 GFRAME TG2 MOMENTS CHECKSUM: 9.4584493446427D+03 %MFRCHK - LABEL "BALE0_SGF", # 50= -3.10898E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 50= -3.10898E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.93313300000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 21 TA= 1.60000E-01 CPU TIME= 1.49270E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 7.486055555546045E-002 %check_save_state: izleft hours = 15.9066666666667 --> plasma_hash("gframe"): TA= 1.600000E-01 NSTEP= 21 Hash code: 55413854 ->PRGCHK: bdy curvature ratio at t= 1.6250E-01 seconds is: 6.5973E-02 % MHDEQ: TG1= 0.160000 ; TG2= 0.162500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1890E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.5973E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.160000 TO TG2= 0.162500 @ NSTEP 21 GFRAME TG2 MOMENTS CHECKSUM: 9.4687687314740D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.52392E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.52392E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.625000E-01 NSTEP= 22 Hash code: 75546427 ->PRGCHK: bdy curvature ratio at t= 1.6500E-01 seconds is: 5.4584E-02 % MHDEQ: TG1= 0.162500 ; TG2= 0.165000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.2940E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.4584E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.162500 TO TG2= 0.165000 @ NSTEP 22 GFRAME TG2 MOMENTS CHECKSUM: 9.4790881183052D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.49711E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.49711E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.68221000000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 23 TA= 1.65000E-01 CPU TIME= 1.46050E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 8.177055555506740E-002 %check_save_state: izleft hours = 15.8997222222222 --> plasma_hash("gframe"): TA= 1.650000E-01 NSTEP= 23 Hash code: 93383320 ->PRGCHK: bdy curvature ratio at t= 1.6750E-01 seconds is: 5.5103E-02 % MHDEQ: TG1= 0.165000 ; TG2= 0.167500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7990E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.5103E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.165000 TO TG2= 0.167500 @ NSTEP 23 GFRAME TG2 MOMENTS CHECKSUM: 9.4835139679422D+03 %MFRCHK - LABEL "BALE0_SGF", # 50= 4.07741E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 50= 4.07741E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.675000E-01 NSTEP= 24 Hash code: 63770699 ->PRGCHK: bdy curvature ratio at t= 1.7000E-01 seconds is: 5.5772E-02 % MHDEQ: TG1= 0.167500 ; TG2= 0.170000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5750E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.5772E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.167500 TO TG2= 0.170000 @ NSTEP 24 GFRAME TG2 MOMENTS CHECKSUM: 9.4879398175791D+03 %MFRCHK - LABEL "BALE0_SGF", # 50= 4.01540E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 50= 4.01540E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.91951999999998 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 25 TA= 1.70000E-01 CPU TIME= 1.33470E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 8.857111111046834E-002 %check_save_state: izleft hours = 15.8930555555556 --> plasma_hash("gframe"): TA= 1.700000E-01 NSTEP= 25 Hash code: 49751714 ->PRGCHK: bdy curvature ratio at t= 1.7250E-01 seconds is: 5.6586E-02 % MHDEQ: TG1= 0.170000 ; TG2= 0.172500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5670E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.6586E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.170000 TO TG2= 0.172500 @ NSTEP 25 GFRAME TG2 MOMENTS CHECKSUM: 9.4923656672160D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= 2.44112E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= 2.44112E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.725000E-01 NSTEP= 26 Hash code: 4004386 ->PRGCHK: bdy curvature ratio at t= 1.7500E-01 seconds is: 5.7538E-02 % MHDEQ: TG1= 0.172500 ; TG2= 0.175000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3240E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7538E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.172500 TO TG2= 0.175000 @ NSTEP 26 GFRAME TG2 MOMENTS CHECKSUM: 9.4967915168529D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= 2.40836E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= 2.40836E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.96110500000003 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 27 TA= 1.75000E-01 CPU TIME= 1.51340E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 9.577055555519109E-002 %check_save_state: izleft hours = 15.8858333333333 --> plasma_hash("gframe"): TA= 1.750000E-01 NSTEP= 27 Hash code: 28344874 ->PRGCHK: bdy curvature ratio at t= 1.7750E-01 seconds is: 5.8627E-02 % MHDEQ: TG1= 0.175000 ; TG2= 0.177500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.2280E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.8627E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.175000 TO TG2= 0.177500 @ NSTEP 27 GFRAME TG2 MOMENTS CHECKSUM: 9.5012173664899D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -1.35069E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -1.35069E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.775000E-01 NSTEP= 28 Hash code: 18129545 ->PRGCHK: bdy curvature ratio at t= 1.8000E-01 seconds is: 5.9851E-02 % MHDEQ: TG1= 0.177500 ; TG2= 0.180000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5470E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.9850E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.177500 TO TG2= 0.180000 @ NSTEP 28 GFRAME TG2 MOMENTS CHECKSUM: 9.5056432161268D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -1.33357E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -1.33357E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.84730600000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 29 TA= 1.80000E-01 CPU TIME= 1.50100E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.103199722222598 %check_save_state: izleft hours = 15.8783333333333 --> plasma_hash("gframe"): TA= 1.800000E-01 NSTEP= 29 Hash code: 5457681 ->PRGCHK: bdy curvature ratio at t= 1.8250E-01 seconds is: 5.8967E-02 % MHDEQ: TG1= 0.180000 ; TG2= 0.182500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0360E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.8967E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.180000 TO TG2= 0.182500 @ NSTEP 29 GFRAME TG2 MOMENTS CHECKSUM: 9.5549284265423D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= 1.42794E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= 1.42794E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.825000E-01 NSTEP= 30 Hash code: 83853926 ->PRGCHK: bdy curvature ratio at t= 1.8500E-01 seconds is: 5.8111E-02 % MHDEQ: TG1= 0.182500 ; TG2= 0.185000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5670E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.8111E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.182500 TO TG2= 0.185000 @ NSTEP 30 GFRAME TG2 MOMENTS CHECKSUM: 9.6042136369578D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= 1.42319E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= 1.42319E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.95678799999996 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 31 TA= 1.85000E-01 CPU TIME= 1.55140E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.111426111111086 %check_save_state: izleft hours = 15.8700000000000 --> plasma_hash("gframe"): TA= 1.850000E-01 NSTEP= 31 Hash code: 36997960 ->PRGCHK: bdy curvature ratio at t= 1.8750E-01 seconds is: 5.9381E-02 % MHDEQ: TG1= 0.185000 ; TG2= 0.187500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0960E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.9381E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.185000 TO TG2= 0.187500 @ NSTEP 31 GFRAME TG2 MOMENTS CHECKSUM: 9.6533836540012D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= 3.69627E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= 3.69627E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.875000E-01 NSTEP= 32 Hash code: 89140174 ->PRGCHK: bdy curvature ratio at t= 1.9000E-01 seconds is: 6.0666E-02 % MHDEQ: TG1= 0.187500 ; TG2= 0.190000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3770E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.0665E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.187500 TO TG2= 0.190000 @ NSTEP 32 GFRAME TG2 MOMENTS CHECKSUM: 9.7025536710445D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= 3.70121E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= 3.70121E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.88033400000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 33 TA= 1.90000E-01 CPU TIME= 1.33870E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.120318611110633 %check_save_state: izleft hours = 15.8611111111111 --> plasma_hash("gframe"): TA= 1.900000E-01 NSTEP= 33 Hash code: 35200068 ->PRGCHK: bdy curvature ratio at t= 1.9250E-01 seconds is: 6.3812E-02 % MHDEQ: TG1= 0.190000 ; TG2= 0.192500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8200E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.3812E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.190000 TO TG2= 0.192500 @ NSTEP 33 GFRAME TG2 MOMENTS CHECKSUM: 9.7441703453339D+03 ?pt_dvs_solver: itmax= 100 ?pt_dvs_solver: too many iterations. ?pt_dvs_solver: debug files written: state files: pt_ta.debug.cdf pt_tb.debug.cdf control obj: ctrl.debug.cdf %MFRCHK - LABEL "BALE0_SGF", # 46= -1.81287E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.81287E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= -1.81200E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.81200E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.925000E-01 NSTEP= 35 Hash code: 70645740 ->PRGCHK: bdy curvature ratio at t= 1.9500E-01 seconds is: 6.7053E-02 % MHDEQ: TG1= 0.192500 ; TG2= 0.195000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5530E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.7053E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.192500 TO TG2= 0.195000 @ NSTEP 35 GFRAME TG2 MOMENTS CHECKSUM: 9.7857870196233D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.81116E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.81116E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 36 TA= 1.93750E-01 CPU TIME= 1.46820E-02 SECONDS. DT= 1.25000E-03 %MFRCHK - LABEL "BALE0_SGF", # 48= 1.78591E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= 1.78591E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86463300000003 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 37 TA= 1.95000E-01 CPU TIME= 1.33320E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.133544444443942 %check_save_state: izleft hours = 15.8480555555556 --> plasma_hash("gframe"): TA= 1.950000E-01 NSTEP= 37 Hash code: 101513467 ->PRGCHK: bdy curvature ratio at t= 1.9750E-01 seconds is: 6.9375E-02 % MHDEQ: TG1= 0.195000 ; TG2= 0.197500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5670E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.9375E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.195000 TO TG2= 0.197500 @ NSTEP 37 GFRAME TG2 MOMENTS CHECKSUM: 9.8229000850175D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.45136E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.45136E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= -1.45171E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.45171E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.975000E-01 NSTEP= 39 Hash code: 61490280 ->PRGCHK: bdy curvature ratio at t= 2.0000E-01 seconds is: 7.1270E-02 % MHDEQ: TG1= 0.197500 ; TG2= 0.200000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3300E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.1270E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.197500 TO TG2= 0.200000 @ NSTEP 39 GFRAME TG2 MOMENTS CHECKSUM: 9.8600131504116D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.45212E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.45212E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= -1.45252E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.45252E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.90402200000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 41 TA= 2.00000E-01 CPU TIME= 1.46440E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.143546666666680 %check_save_state: izleft hours = 15.8380555555556 --> plasma_hash("gframe"): TA= 2.000000E-01 NSTEP= 41 Hash code: 79770632 ->PRGCHK: bdy curvature ratio at t= 2.0250E-01 seconds is: 6.9099E-02 % MHDEQ: TG1= 0.200000 ; TG2= 0.202500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6440E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.9099E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.200000 TO TG2= 0.202500 @ NSTEP 41 GFRAME TG2 MOMENTS CHECKSUM: 9.8791117515241D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= 3.68087E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= 3.68087E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 49= 3.68836E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= 3.68836E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.025000E-01 NSTEP= 43 Hash code: 97343458 ->PRGCHK: bdy curvature ratio at t= 2.0500E-01 seconds is: 6.6724E-02 % MHDEQ: TG1= 0.202500 ; TG2= 0.205000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7680E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.6724E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.202500 TO TG2= 0.205000 @ NSTEP 43 GFRAME TG2 MOMENTS CHECKSUM: 9.8982103526365D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= 3.69572E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= 3.69572E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 44 TA= 2.03750E-01 CPU TIME= 1.55400E-02 SECONDS. DT= 1.25000E-03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.27567E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.27567E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.68419899999992 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 45 TA= 2.05000E-01 CPU TIME= 1.45970E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.151913888888430 %check_save_state: izleft hours = 15.8297222222222 --> plasma_hash("gframe"): TA= 2.050000E-01 NSTEP= 45 Hash code: 62949508 ->PRGCHK: bdy curvature ratio at t= 2.0750E-01 seconds is: 6.4383E-02 % MHDEQ: TG1= 0.205000 ; TG2= 0.207500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8530E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.4383E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.205000 TO TG2= 0.207500 @ NSTEP 45 GFRAME TG2 MOMENTS CHECKSUM: 9.8971046148798D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.71384E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.71384E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= -1.71495E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.71495E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.075000E-01 NSTEP= 47 Hash code: 2187670 ->PRGCHK: bdy curvature ratio at t= 2.1000E-01 seconds is: 6.1930E-02 % MHDEQ: TG1= 0.207500 ; TG2= 0.210000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8530E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.1930E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.207500 TO TG2= 0.210000 @ NSTEP 47 GFRAME TG2 MOMENTS CHECKSUM: 9.8959988771231D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.71602E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.71602E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 48 TA= 2.08750E-01 CPU TIME= 1.46370E-02 SECONDS. DT= 1.25000E-03 %MFRCHK - LABEL "BALE0_SGF", # 48= 5.55930E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= 5.55930E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86217400000010 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 49 TA= 2.10000E-01 CPU TIME= 1.46970E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.159643888888695 %check_save_state: izleft hours = 15.8219444444444 --> plasma_hash("gframe"): TA= 2.100000E-01 NSTEP= 49 Hash code: 80432759 ->PRGCHK: bdy curvature ratio at t= 2.1250E-01 seconds is: 5.9054E-02 % MHDEQ: TG1= 0.210000 ; TG2= 0.212500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8370E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.9054E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.210000 TO TG2= 0.212500 @ NSTEP 49 GFRAME TG2 MOMENTS CHECKSUM: 9.8948931393664D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -1.21332E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.21332E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= -1.21441E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.21441E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.125000E-01 NSTEP= 51 Hash code: 66882596 ->PRGCHK: bdy curvature ratio at t= 2.1500E-01 seconds is: 5.6314E-02 % MHDEQ: TG1= 0.212500 ; TG2= 0.215000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7930E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.6314E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.212500 TO TG2= 0.215000 @ NSTEP 51 GFRAME TG2 MOMENTS CHECKSUM: 9.8937874016097D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -1.21547E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.21547E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 52 TA= 2.13750E-01 CPU TIME= 1.50330E-02 SECONDS. DT= 1.25000E-03 %MFRCHK - LABEL "BALE0_SGF", # 47= -3.05160E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -3.05160E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86168099999998 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 53 TA= 2.15000E-01 CPU TIME= 1.34570E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.167165833333456 %check_save_state: izleft hours = 15.8144444444444 --> plasma_hash("gframe"): TA= 2.150000E-01 NSTEP= 53 Hash code: 88222081 ->PRGCHK: bdy curvature ratio at t= 2.1750E-01 seconds is: 5.2195E-02 % MHDEQ: TG1= 0.215000 ; TG2= 0.217500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6140E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.2195E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.215000 TO TG2= 0.217500 @ NSTEP 53 GFRAME TG2 MOMENTS CHECKSUM: 9.8926471496076D+03 %MFRCHK - LABEL "BALE0_SGF", # 49= -1.47390E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= -1.47390E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 49= -1.47846E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 49= -1.47846E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.175000E-01 NSTEP= 55 Hash code: 70759125 ->PRGCHK: bdy curvature ratio at t= 2.2000E-01 seconds is: 4.8339E-02 % MHDEQ: TG1= 0.217500 ; TG2= 0.220000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9200E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.8339E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.217500 TO TG2= 0.220000 @ NSTEP 55 GFRAME TG2 MOMENTS CHECKSUM: 9.8915068976056D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 55 TA= 2.17500E-01 CPU TIME= 1.58900E-02 SECONDS. DT= 1.25000E-03 %MFRCHK - LABEL "BALE0_SGF", # 47= -3.94311E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -3.94311E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= -3.96509E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -3.96509E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.74847000000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 57 TA= 2.20000E-01 CPU TIME= 1.49080E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.174697777777510 %check_save_state: izleft hours = 15.8069444444444 --> plasma_hash("gframe"): TA= 2.200000E-01 NSTEP= 57 Hash code: 42114082 ->PRGCHK: bdy curvature ratio at t= 2.2250E-01 seconds is: 4.6296E-02 % MHDEQ: TG1= 0.220000 ; TG2= 0.222500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8000E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.6296E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.220000 TO TG2= 0.222500 @ NSTEP 57 GFRAME TG2 MOMENTS CHECKSUM: 9.8931841650941D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= -1.19926E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= -1.19926E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 45= -1.20472E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= -1.20472E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.225000E-01 NSTEP= 59 Hash code: 83007201 ->PRGCHK: bdy curvature ratio at t= 2.2500E-01 seconds is: 4.4281E-02 % MHDEQ: TG1= 0.222500 ; TG2= 0.225000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5200E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.4280E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.222500 TO TG2= 0.225000 @ NSTEP 59 GFRAME TG2 MOMENTS CHECKSUM: 9.8948614325826D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 59 TA= 2.22500E-01 CPU TIME= 1.47420E-02 SECONDS. DT= 1.25000E-03 %MFRCHK - LABEL "BALE0_SGF", # 48= -6.55144E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -6.55144E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -6.58287E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -6.58287E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.96401000000003 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 61 TA= 2.25000E-01 CPU TIME= 1.46960E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.181936666667298 %check_save_state: izleft hours = 15.7997222222222 --> plasma_hash("gframe"): TA= 2.250000E-01 NSTEP= 61 Hash code: 93434675 ->PRGCHK: bdy curvature ratio at t= 2.2750E-01 seconds is: 4.7468E-02 ->PRGCHK: bdy curvature ratio at t= 2.2706E-01 seconds is: 4.6894E-02 ->PRGCHK: bdy curvature ratio at t= 2.2696E-01 seconds is: 4.6761E-02 % MHDEQ: TG1= 0.225000 ; TG2= 0.226956 ; DTG= 1.956E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6240E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.6761E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.225000 TO TG2= 0.226956 @ NSTEP 61 GFRAME TG2 MOMENTS CHECKSUM: 9.9028110480575D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= -1.37792E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= -1.37792E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 45= -1.37814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= -1.37814E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.269557E-01 NSTEP= 63 Hash code: 43764446 ->PRGCHK: bdy curvature ratio at t= 2.2848E-01 seconds is: 4.8756E-02 % MHDEQ: TG1= 0.226956 ; TG2= 0.228478 ; DTG= 1.522E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5350E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.8756E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.226956 TO TG2= 0.228478 @ NSTEP 63 GFRAME TG2 MOMENTS CHECKSUM: 9.9089981795745D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= -1.37848E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= -1.37848E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 64 TA= 2.28206E-01 CPU TIME= 1.47310E-02 SECONDS. DT= 2.72134E-04 --> plasma_hash("gframe"): TA= 2.284779E-01 NSTEP= 65 Hash code: 16937152 ->PRGCHK: bdy curvature ratio at t= 2.3000E-01 seconds is: 5.0808E-02 % MHDEQ: TG1= 0.228478 ; TG2= 0.230000 ; DTG= 1.522E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5610E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.0808E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.228478 TO TG2= 0.230000 @ NSTEP 65 GFRAME TG2 MOMENTS CHECKSUM: 9.9151853110914D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= -1.18550E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= -1.18550E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.93498299999999 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 67 TA= 2.30000E-01 CPU TIME= 1.35110E-02 SECONDS. DT= 2.72134E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.190025555555621 %check_save_state: izleft hours = 15.7916666666667 --> plasma_hash("gframe"): TA= 2.300000E-01 NSTEP= 67 Hash code: 55968298 ->PRGCHK: bdy curvature ratio at t= 2.3167E-01 seconds is: 5.5773E-02 % MHDEQ: TG1= 0.230000 ; TG2= 0.231667 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6130E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.5773E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.230000 TO TG2= 0.231667 @ NSTEP 67 GFRAME TG2 MOMENTS CHECKSUM: 9.9332235926441D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= 2.24821E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.24821E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.316667E-01 NSTEP= 74 Hash code: 61066015 ->PRGCHK: bdy curvature ratio at t= 2.3333E-01 seconds is: 6.0491E-02 % MHDEQ: TG1= 0.231667 ; TG2= 0.233333 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3420E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.0491E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.231667 TO TG2= 0.233333 @ NSTEP 74 GFRAME TG2 MOMENTS CHECKSUM: 9.9512618741968D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= 2.27138E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.27138E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 45= 2.29408E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.29408E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.333333E-01 NSTEP= 81 Hash code: 83474548 ->PRGCHK: bdy curvature ratio at t= 2.3500E-01 seconds is: 6.4786E-02 % MHDEQ: TG1= 0.233333 ; TG2= 0.235000 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7390E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.4786E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.233333 TO TG2= 0.235000 @ NSTEP 81 GFRAME TG2 MOMENTS CHECKSUM: 9.9693001557494D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 81 TA= 2.33333E-01 CPU TIME= 1.52350E-02 SECONDS. DT= 2.72134E-04 %MFRCHK - LABEL "BALE0_SGF", # 47= 1.71117E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= 1.71117E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.68630399999995 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 88 TA= 2.35000E-01 CPU TIME= 1.47340E-02 SECONDS. DT= 3.72518E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.198642777777422 %check_save_state: izleft hours = 15.7827777777778 --> plasma_hash("gframe"): TA= 2.350000E-01 NSTEP= 88 Hash code: 40350177 ->PRGCHK: bdy curvature ratio at t= 2.3750E-01 seconds is: 6.2279E-02 % MHDEQ: TG1= 0.235000 ; TG2= 0.237500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7920E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.2279E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.235000 TO TG2= 0.237500 @ NSTEP 88 GFRAME TG2 MOMENTS CHECKSUM: 9.9393074261593D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -2.33396E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -2.33396E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= -2.34220E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -2.34220E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= -2.34996E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -2.34996E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.375000E-01 NSTEP= 114 Hash code: 92452757 ->PRGCHK: bdy curvature ratio at t= 2.4000E-01 seconds is: 5.9833E-02 % MHDEQ: TG1= 0.237500 ; TG2= 0.240000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5520E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.9833E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.237500 TO TG2= 0.240000 @ NSTEP 114 GFRAME TG2 MOMENTS CHECKSUM: 9.9093146965692D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 116 TA= 2.37914E-01 CPU TIME= 1.48180E-02 SECONDS. DT= 2.07117E-04 %MFRCHK - LABEL "BALE0_SGF", # 45= 2.55579E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.55579E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 45= 2.56286E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.56286E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.98797700000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 126 TA= 2.40000E-01 CPU TIME= 1.49560E-02 SECONDS. DT= 8.89502E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.207616111111747 %check_save_state: izleft hours = 15.7738888888889 --> plasma_hash("gframe"): TA= 2.400000E-01 NSTEP= 126 Hash code: 43794631 ->PRGCHK: bdy curvature ratio at t= 2.4250E-01 seconds is: 5.7476E-02 % MHDEQ: TG1= 0.240000 ; TG2= 0.242500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7650E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7476E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.240000 TO TG2= 0.242500 @ NSTEP 126 GFRAME TG2 MOMENTS CHECKSUM: 9.8927742478400D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 2.40735E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 2.40735E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= 2.41099E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 2.41099E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= 2.41444E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 2.41444E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.425000E-01 NSTEP= 144 Hash code: 106358690 ->PRGCHK: bdy curvature ratio at t= 2.4500E-01 seconds is: 5.4925E-02 % MHDEQ: TG1= 0.242500 ; TG2= 0.245000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 6.0530E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.4925E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.242500 TO TG2= 0.245000 @ NSTEP 144 GFRAME TG2 MOMENTS CHECKSUM: 9.8762337991108D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 2.41808E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 2.41808E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 150 TA= 2.43884E-01 CPU TIME= 1.55630E-02 SECONDS. DT= 2.30714E-04 %MFRCHK - LABEL "BALE0_SGF", # 47= 1.41508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= 1.41508E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86109299999998 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 155 TA= 2.45000E-01 CPU TIME= 1.35000E-02 SECONDS. DT= 1.69789E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.215940833332752 %check_save_state: izleft hours = 15.7655555555556 --> plasma_hash("gframe"): TA= 2.450000E-01 NSTEP= 155 Hash code: 28016738 ->PRGCHK: bdy curvature ratio at t= 2.4750E-01 seconds is: 5.6568E-02 % MHDEQ: TG1= 0.245000 ; TG2= 0.247500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5480E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.6568E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.245000 TO TG2= 0.247500 @ NSTEP 155 GFRAME TG2 MOMENTS CHECKSUM: 9.8859455983017D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.19476E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.19476E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= -1.19717E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.19717E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= -1.20019E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.20019E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.475000E-01 NSTEP= 165 Hash code: 69401518 ->PRGCHK: bdy curvature ratio at t= 2.5000E-01 seconds is: 5.8230E-02 % MHDEQ: TG1= 0.247500 ; TG2= 0.250000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5790E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.8230E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.247500 TO TG2= 0.250000 @ NSTEP 165 GFRAME TG2 MOMENTS CHECKSUM: 9.8956573974926D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 166 TA= 2.47864E-01 CPU TIME= 1.51190E-02 SECONDS. DT= 4.00354E-04 %MFRCHK - LABEL "BALE0_SGF", # 39= 1.34308E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= 1.34308E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= 1.34584E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= 1.34584E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.95024400000000 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 171 TA= 2.50000E-01 CPU TIME= 1.50240E-02 SECONDS. DT= 3.05796E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.223551944444353 %check_save_state: izleft hours = 15.7580555555556 --> plasma_hash("gframe"): TA= 2.500000E-01 NSTEP= 171 Hash code: 63232820 ->PRGCHK: bdy curvature ratio at t= 2.5250E-01 seconds is: 6.2626E-02 % MHDEQ: TG1= 0.250000 ; TG2= 0.252500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8120E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.2626E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.250000 TO TG2= 0.252500 @ NSTEP 171 GFRAME TG2 MOMENTS CHECKSUM: 9.9048243949759D+03 %MFRCHK - LABEL "BALE0_SGF", # 41= 1.33253E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= 1.33253E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= 1.33404E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= 1.33404E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 177 TA= 2.52031E-01 CPU TIME= 1.48740E-02 SECONDS. DT= 4.07015E-04 --> plasma_hash("gframe"): TA= 2.525000E-01 NSTEP= 179 Hash code: 107165911 ->PRGCHK: bdy curvature ratio at t= 2.5500E-01 seconds is: 6.7200E-02 % MHDEQ: TG1= 0.252500 ; TG2= 0.255000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5410E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.7200E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.252500 TO TG2= 0.255000 @ NSTEP 179 GFRAME TG2 MOMENTS CHECKSUM: 9.9139913924592D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= 5.96506E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= 5.96506E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= 5.97834E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= 5.97834E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 183 TA= 2.54128E-01 CPU TIME= 1.53770E-02 SECONDS. DT= 4.07015E-04 %MFRCHK - LABEL "BALE0_SGF", # 47= -1.82241E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.82241E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.96583400000009 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 186 TA= 2.55000E-01 CPU TIME= 1.50100E-02 SECONDS. DT= 5.79129E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.231017499999780 %check_save_state: izleft hours = 15.7505555555556 --> plasma_hash("gframe"): TA= 2.550000E-01 NSTEP= 186 Hash code: 73054350 ->PRGCHK: bdy curvature ratio at t= 2.5750E-01 seconds is: 6.9428E-02 % MHDEQ: TG1= 0.255000 ; TG2= 0.257500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8540E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.9428E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.255000 TO TG2= 0.257500 @ NSTEP 186 GFRAME TG2 MOMENTS CHECKSUM: 9.8919845050291D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -2.89125E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.89125E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.89885E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.89885E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 202 TA= 2.57060E-01 CPU TIME= 1.48450E-02 SECONDS. DT= 2.19924E-04 --> plasma_hash("gframe"): TA= 2.575000E-01 NSTEP= 204 Hash code: 60268253 ->PRGCHK: bdy curvature ratio at t= 2.6000E-01 seconds is: 7.1378E-02 % MHDEQ: TG1= 0.257500 ; TG2= 0.260000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5630E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.1378E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.257500 TO TG2= 0.260000 @ NSTEP 204 GFRAME TG2 MOMENTS CHECKSUM: 9.8699776175990D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 210 TA= 2.59137E-01 CPU TIME= 1.53830E-02 SECONDS. DT= 3.22270E-04 %tr_rfprep: rfxqlo setup done, cpu(s) = 1.89972399999999 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 213 TA= 2.60000E-01 CPU TIME= 1.35690E-02 SECONDS. DT= 2.40530E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.239172777778094 %check_save_state: izleft hours = 15.7425000000000 --> plasma_hash("gframe"): TA= 2.600000E-01 NSTEP= 213 Hash code: 91212300 ->PRGCHK: bdy curvature ratio at t= 2.6250E-01 seconds is: 6.4361E-02 % MHDEQ: TG1= 0.260000 ; TG2= 0.262500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5770E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.4361E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.260000 TO TG2= 0.262500 @ NSTEP 213 GFRAME TG2 MOMENTS CHECKSUM: 9.8180998269624D+03 %MFRCHK - LABEL "BALE0_SGF", # 38= 1.50658E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.50658E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 38= 1.50861E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.50861E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 38= 1.51075E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.51075E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 222 TA= 2.62309E-01 CPU TIME= 1.37240E-02 SECONDS. DT= 1.90917E-04 --> plasma_hash("gframe"): TA= 2.625000E-01 NSTEP= 223 Hash code: 123157830 ->PRGCHK: bdy curvature ratio at t= 2.6500E-01 seconds is: 5.7478E-02 % MHDEQ: TG1= 0.262500 ; TG2= 0.265000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6330E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7478E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.262500 TO TG2= 0.265000 @ NSTEP 223 GFRAME TG2 MOMENTS CHECKSUM: 9.7662220363258D+03 %MFRCHK - LABEL "BALE0_SGF", # 38= 1.26899E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.26899E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 38= 1.27077E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.27077E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 231 TA= 2.64617E-01 CPU TIME= 1.58150E-02 SECONDS. DT= 2.64582E-04 %tr_rfprep: rfxqlo setup done, cpu(s) = 1.82291199999997 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 233 TA= 2.65000E-01 CPU TIME= 1.48670E-02 SECONDS. DT= 1.18758E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.247080277777059 %check_save_state: izleft hours = 15.7344444444444 --> plasma_hash("gframe"): TA= 2.650000E-01 NSTEP= 233 Hash code: 14986974 ->PRGCHK: bdy curvature ratio at t= 2.6750E-01 seconds is: 6.3228E-02 ->PRGCHK: bdy curvature ratio at t= 2.6667E-01 seconds is: 6.1270E-02 % MHDEQ: TG1= 0.265000 ; TG2= 0.266667 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8150E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.1270E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.265000 TO TG2= 0.266667 @ NSTEP 233 GFRAME TG2 MOMENTS CHECKSUM: 9.8119874914351D+03 %MFRCHK - LABEL "BALE0_SGF", # 41= -1.67296E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.67296E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= -1.67713E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.67713E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.666667E-01 NSTEP= 247 Hash code: 64109427 ->PRGCHK: bdy curvature ratio at t= 2.6833E-01 seconds is: 6.5225E-02 % MHDEQ: TG1= 0.266667 ; TG2= 0.268333 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6090E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.5225E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.266667 TO TG2= 0.268333 @ NSTEP 247 GFRAME TG2 MOMENTS CHECKSUM: 9.8577529465444D+03 %MFRCHK - LABEL "BALE0_SGF", # 41= -1.68166E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.68166E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= -1.68624E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.68624E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.683333E-01 NSTEP= 260 Hash code: 11648455 ->PRGCHK: bdy curvature ratio at t= 2.7000E-01 seconds is: 6.9332E-02 % MHDEQ: TG1= 0.268333 ; TG2= 0.270000 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5690E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.9332E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.268333 TO TG2= 0.270000 @ NSTEP 260 GFRAME TG2 MOMENTS CHECKSUM: 9.9035184016536D+03 %MFRCHK - LABEL "BALE0_SGF", # 41= -1.69109E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.69109E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.74617699999999 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 273 TA= 2.70000E-01 CPU TIME= 1.53410E-02 SECONDS. DT= 9.90623E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.256342777777718 %check_save_state: izleft hours = 15.7252777777778 --> plasma_hash("gframe"): TA= 2.700000E-01 NSTEP= 273 Hash code: 98800877 ->PRGCHK: bdy curvature ratio at t= 2.7250E-01 seconds is: 6.7721E-02 % MHDEQ: TG1= 0.270000 ; TG2= 0.272500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1350E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.7721E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.270000 TO TG2= 0.272500 @ NSTEP 273 GFRAME TG2 MOMENTS CHECKSUM: 9.9231945332417D+03 %MFRCHK - LABEL "BALE0_SGF", # 41= -1.70948E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.70948E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= -1.71271E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.71271E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= -1.71646E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.71646E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.725000E-01 NSTEP= 294 Hash code: 92992734 ->PRGCHK: bdy curvature ratio at t= 2.7500E-01 seconds is: 6.6148E-02 % MHDEQ: TG1= 0.272500 ; TG2= 0.275000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5600E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.6148E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.272500 TO TG2= 0.275000 @ NSTEP 294 GFRAME TG2 MOMENTS CHECKSUM: 9.9428706648298D+03 %MFRCHK - LABEL "BALE0_SGF", # 41= -1.71988E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.71988E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= -1.72316E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.72316E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.91289099999995 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 310 TA= 2.75000E-01 CPU TIME= 1.48900E-02 SECONDS. DT= 1.06888E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.265140277777846 %check_save_state: izleft hours = 15.7163888888889 --> plasma_hash("gframe"): TA= 2.750000E-01 NSTEP= 310 Hash code: 47284985 ->PRGCHK: bdy curvature ratio at t= 2.7750E-01 seconds is: 7.2117E-02 % MHDEQ: TG1= 0.275000 ; TG2= 0.277500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8100E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.2117E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.275000 TO TG2= 0.277500 @ NSTEP 310 GFRAME TG2 MOMENTS CHECKSUM: 9.9050587775935D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.23259E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.23259E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= -1.23715E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.23715E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= -1.24186E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.24186E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.775000E-01 NSTEP= 330 Hash code: 81366989 ->PRGCHK: bdy curvature ratio at t= 2.8000E-01 seconds is: 7.8422E-02 % MHDEQ: TG1= 0.277500 ; TG2= 0.280000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8020E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.8422E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.277500 TO TG2= 0.280000 @ NSTEP 330 GFRAME TG2 MOMENTS CHECKSUM: 9.8672468903572D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.24735E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.24735E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= -1.25276E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.25276E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 339 TA= 2.79922E-01 CPU TIME= 1.49260E-02 SECONDS. DT= 7.81563E-05 %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86428699999999 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 340 TA= 2.80000E-01 CPU TIME= 1.35770E-02 SECONDS. DT= 7.81563E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.273621111110515 %check_save_state: izleft hours = 15.7080555555556 --> plasma_hash("gframe"): TA= 2.800000E-01 NSTEP= 340 Hash code: 5081826 ->PRGCHK: bdy curvature ratio at t= 2.8250E-01 seconds is: 8.2606E-02 % MHDEQ: TG1= 0.280000 ; TG2= 0.282500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5510E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.2606E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.280000 TO TG2= 0.282500 @ NSTEP 340 GFRAME TG2 MOMENTS CHECKSUM: 9.8468650941544D+03 %MFRCHK - LABEL "BALE0_SGF", # 43= 2.30224E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 2.30224E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= 2.31195E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 2.31195E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.825000E-01 NSTEP= 359 Hash code: 26680466 ->PRGCHK: bdy curvature ratio at t= 2.8500E-01 seconds is: 8.6983E-02 % MHDEQ: TG1= 0.282500 ; TG2= 0.285000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7320E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.6983E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.282500 TO TG2= 0.285000 @ NSTEP 359 GFRAME TG2 MOMENTS CHECKSUM: 9.8264832979516D+03 %MFRCHK - LABEL "BALE0_SGF", # 43= 2.32322E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 2.32322E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= 2.33311E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 2.33311E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= 2.34153E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 2.34153E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86497699999995 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 366 TA= 2.85000E-01 CPU TIME= 1.48950E-02 SECONDS. DT= 4.60018E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.281862222222571 %check_save_state: izleft hours = 15.6997222222222 --> plasma_hash("gframe"): TA= 2.850000E-01 NSTEP= 366 Hash code: 8709166 ->PRGCHK: bdy curvature ratio at t= 2.8750E-01 seconds is: 7.9318E-02 % MHDEQ: TG1= 0.285000 ; TG2= 0.287500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8330E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.9318E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.285000 TO TG2= 0.287500 @ NSTEP 366 GFRAME TG2 MOMENTS CHECKSUM: 9.8625557383304D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= -1.56108E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.56108E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.56093E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.56093E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.875000E-01 NSTEP= 371 Hash code: 72799717 ->PRGCHK: bdy curvature ratio at t= 2.9000E-01 seconds is: 7.2035E-02 % MHDEQ: TG1= 0.287500 ; TG2= 0.290000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7510E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.2035E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.287500 TO TG2= 0.290000 @ NSTEP 371 GFRAME TG2 MOMENTS CHECKSUM: 9.8986281787091D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= -1.56084E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.56084E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.56079E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.56079E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.56072E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.56072E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.85375499999998 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 375 TA= 2.90000E-01 CPU TIME= 1.48820E-02 SECONDS. DT= 5.27408E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.288865555555731 %check_save_state: izleft hours = 15.6927777777778 --> plasma_hash("gframe"): TA= 2.900000E-01 NSTEP= 375 Hash code: 82045748 ->PRGCHK: bdy curvature ratio at t= 2.9250E-01 seconds is: 7.7747E-02 % MHDEQ: TG1= 0.290000 ; TG2= 0.292500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7910E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.7747E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.290000 TO TG2= 0.292500 @ NSTEP 375 GFRAME TG2 MOMENTS CHECKSUM: 9.8749568109201D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= -1.37850E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.37850E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.37948E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.37948E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.925000E-01 NSTEP= 380 Hash code: 5654149 ->PRGCHK: bdy curvature ratio at t= 2.9500E-01 seconds is: 8.3676E-02 % MHDEQ: TG1= 0.292500 ; TG2= 0.295000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5240E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.3676E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.292500 TO TG2= 0.295000 @ NSTEP 380 GFRAME TG2 MOMENTS CHECKSUM: 9.8512854431311D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= -1.38032E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.38032E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.38128E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.38128E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.38211E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.38211E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 2.03404999999998 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 385 TA= 2.95000E-01 CPU TIME= 1.61090E-02 SECONDS. DT= 3.90367E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.296052500000314 %check_save_state: izleft hours = 15.6855555555556 --> plasma_hash("gframe"): TA= 2.950000E-01 NSTEP= 385 Hash code: 101830641 ->PRGCHK: bdy curvature ratio at t= 2.9750E-01 seconds is: 8.9305E-02 % MHDEQ: TG1= 0.295000 ; TG2= 0.297500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8570E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.9305E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.295000 TO TG2= 0.297500 @ NSTEP 385 GFRAME TG2 MOMENTS CHECKSUM: 9.8200830539667D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -2.33150E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -2.33150E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -2.31232E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -2.31232E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.975000E-01 NSTEP= 392 Hash code: 106513880 ->PRGCHK: bdy curvature ratio at t= 3.0000E-01 seconds is: 9.5627E-02 % MHDEQ: TG1= 0.297500 ; TG2= 0.300000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3020E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 9.5627E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.297500 TO TG2= 0.300000 @ NSTEP 392 GFRAME TG2 MOMENTS CHECKSUM: 9.7888806648023D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -2.29703E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -2.29703E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 394 TA= 2.98281E-01 CPU TIME= 1.49310E-02 SECONDS. DT= 3.90367E-04 %MFRCHK - LABEL "BALE0_SGF", # 38= -1.58447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= -1.58447E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.97575099999995 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 399 TA= 3.00000E-01 CPU TIME= 1.57290E-02 SECONDS. DT= 1.57798E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.303622499999619 %check_save_state: izleft hours = 15.6780555555556 --> plasma_hash("gframe"): TA= 3.000000E-01 NSTEP= 399 Hash code: 54328374 ->PRGCHK: bdy curvature ratio at t= 3.0250E-01 seconds is: 9.9884E-02 % MHDEQ: TG1= 0.300000 ; TG2= 0.302500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.2150E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 9.9884E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.300000 TO TG2= 0.302500 @ NSTEP 399 GFRAME TG2 MOMENTS CHECKSUM: 9.7884213332874D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= 1.46928E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= 1.46928E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= 1.46909E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= 1.46909E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.025000E-01 NSTEP= 412 Hash code: 65220279 ->PRGCHK: bdy curvature ratio at t= 3.0500E-01 seconds is: 1.0436E-01 % MHDEQ: TG1= 0.302500 ; TG2= 0.305000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3250E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.0436E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.302500 TO TG2= 0.305000 @ NSTEP 412 GFRAME TG2 MOMENTS CHECKSUM: 9.7879620017724D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= 1.46887E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= 1.46887E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= 1.46866E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= 1.46866E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= 1.46847E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= 1.46847E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.92034800000010 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 419 TA= 3.05000E-01 CPU TIME= 1.59330E-02 SECONDS. DT= 3.01345E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.311140277777668 %check_save_state: izleft hours = 15.6702777777778 --> plasma_hash("gframe"): TA= 3.050000E-01 NSTEP= 419 Hash code: 111297041 ->PRGCHK: bdy curvature ratio at t= 3.0750E-01 seconds is: 1.0577E-01 % MHDEQ: TG1= 0.305000 ; TG2= 0.307500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0610E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.0577E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.305000 TO TG2= 0.307500 @ NSTEP 419 GFRAME TG2 MOMENTS CHECKSUM: 9.7868476452426D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.27454E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.27454E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= -1.28428E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.28428E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.075000E-01 NSTEP= 428 Hash code: 101921452 ->PRGCHK: bdy curvature ratio at t= 3.1000E-01 seconds is: 1.0733E-01 % MHDEQ: TG1= 0.307500 ; TG2= 0.310000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4850E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.0733E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.307500 TO TG2= 0.310000 @ NSTEP 428 GFRAME TG2 MOMENTS CHECKSUM: 9.7857332887128D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.29237E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.29237E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= -1.29980E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.29980E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.95296600000006 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 437 TA= 3.10000E-01 CPU TIME= 1.58810E-02 SECONDS. DT= 9.81652E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.319030555554946 %check_save_state: izleft hours = 15.6625000000000 --> plasma_hash("gframe"): TA= 3.100000E-01 NSTEP= 437 Hash code: 73372977 ->PRGCHK: bdy curvature ratio at t= 3.1250E-01 seconds is: 1.0491E-01 % MHDEQ: TG1= 0.310000 ; TG2= 0.312500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0350E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.0491E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.310000 TO TG2= 0.312500 @ NSTEP 437 GFRAME TG2 MOMENTS CHECKSUM: 9.7836088786313D+03 %MFRCHK - LABEL "BALE0_SGF", # 37= -1.65384E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= -1.65384E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 37= -1.66168E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= -1.66168E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 37= -1.66979E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= -1.66979E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.125000E-01 NSTEP= 454 Hash code: 50676876 ->PRGCHK: bdy curvature ratio at t= 3.1500E-01 seconds is: 1.0220E-01 % MHDEQ: TG1= 0.312500 ; TG2= 0.315000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4770E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 1.0220E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.312500 TO TG2= 0.315000 @ NSTEP 454 GFRAME TG2 MOMENTS CHECKSUM: 9.7814844685499D+03 %MFRCHK - LABEL "BALE0_SGF", # 37= -1.67948E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= -1.67948E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 37= -1.68722E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= -1.68722E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 464 TA= 3.14815E-01 CPU TIME= 1.49930E-02 SECONDS. DT= 1.85316E-04 %tr_rfprep: rfxqlo setup done, cpu(s) = 2.03138100000001 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 465 TA= 3.15000E-01 CPU TIME= 1.56540E-02 SECONDS. DT= 1.85316E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.327278333333197 %check_save_state: izleft hours = 15.6541666666667 --> plasma_hash("gframe"): TA= 3.150000E-01 NSTEP= 465 Hash code: 425480 ->PRGCHK: bdy curvature ratio at t= 3.1750E-01 seconds is: 9.7813E-02 % MHDEQ: TG1= 0.315000 ; TG2= 0.317500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9660E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 9.7813E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.315000 TO TG2= 0.317500 @ NSTEP 465 GFRAME TG2 MOMENTS CHECKSUM: 9.7917517191521D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= -1.39525E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.39525E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= -1.39204E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.39204E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= -1.38814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.38814E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.175000E-01 NSTEP= 479 Hash code: 114692195 ->PRGCHK: bdy curvature ratio at t= 3.2000E-01 seconds is: 9.3537E-02 % MHDEQ: TG1= 0.317500 ; TG2= 0.320000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3590E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 9.3537E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.317500 TO TG2= 0.320000 @ NSTEP 479 GFRAME TG2 MOMENTS CHECKSUM: 9.8020189697543D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= -1.38501E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.38501E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= -1.38155E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.38155E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 2.05530599999997 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 489 TA= 3.20000E-01 CPU TIME= 1.59360E-02 SECONDS. DT= 2.30607E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.335154444444470 %check_save_state: izleft hours = 15.6463888888889 --> plasma_hash("gframe"): TA= 3.200000E-01 NSTEP= 489 Hash code: 88890345 ->PRGCHK: bdy curvature ratio at t= 3.2250E-01 seconds is: 9.4963E-02 % MHDEQ: TG1= 0.320000 ; TG2= 0.322500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1560E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 9.4962E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.320000 TO TG2= 0.322500 @ NSTEP 489 GFRAME TG2 MOMENTS CHECKSUM: 9.8345500063757D+03 %MFRCHK - LABEL "BALE0_SGF", # 38= 1.35746E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.35746E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 38= 1.35068E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.35068E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 38= 1.34231E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.34231E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.225000E-01 NSTEP= 500 Hash code: 112399538 ->PRGCHK: bdy curvature ratio at t= 3.2500E-01 seconds is: 9.6361E-02 % MHDEQ: TG1= 0.322500 ; TG2= 0.325000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5180E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 9.6361E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.322500 TO TG2= 0.325000 @ NSTEP 500 GFRAME TG2 MOMENTS CHECKSUM: 9.8670810429970D+03 %MFRCHK - LABEL "BALE0_SGF", # 38= 1.33589E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.33589E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 38= 1.32761E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= 1.32761E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 2.01357400000006 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 511 TA= 3.25000E-01 CPU TIME= 1.58930E-02 SECONDS. DT= 1.93926E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.343047777777429 %check_save_state: izleft hours = 15.6386111111111 --> plasma_hash("gframe"): TA= 3.250000E-01 NSTEP= 511 Hash code: 98201798 ->PRGCHK: bdy curvature ratio at t= 3.2750E-01 seconds is: 8.9737E-02 % MHDEQ: TG1= 0.325000 ; TG2= 0.327500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9000E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.9737E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.325000 TO TG2= 0.327500 @ NSTEP 511 GFRAME TG2 MOMENTS CHECKSUM: 9.8781687369907D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= 1.21270E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.21270E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 1.21390E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.21390E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 1.21509E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.21509E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.275000E-01 NSTEP= 524 Hash code: 78205147 ->PRGCHK: bdy curvature ratio at t= 3.3000E-01 seconds is: 8.3234E-02 % MHDEQ: TG1= 0.327500 ; TG2= 0.330000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5670E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.3234E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.327500 TO TG2= 0.330000 @ NSTEP 524 GFRAME TG2 MOMENTS CHECKSUM: 9.8892564309845D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= 1.21651E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.21651E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 1.21772E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.21772E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.99115600000005 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 537 TA= 3.30000E-01 CPU TIME= 1.48850E-02 SECONDS. DT= 1.72883E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.351195277777151 %check_save_state: izleft hours = 15.6302777777778 --> plasma_hash("gframe"): TA= 3.300000E-01 NSTEP= 537 Hash code: 120893439 ->PRGCHK: bdy curvature ratio at t= 3.3250E-01 seconds is: 7.7199E-02 % MHDEQ: TG1= 0.330000 ; TG2= 0.332500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8560E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.7199E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.330000 TO TG2= 0.332500 @ NSTEP 537 GFRAME TG2 MOMENTS CHECKSUM: 9.9003441249782D+03 %MFRCHK - LABEL "BALE0_SGF", # 41= -1.83746E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.83746E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= -1.83895E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.83895E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= -1.84032E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.84032E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.325000E-01 NSTEP= 551 Hash code: 35636852 ->PRGCHK: bdy curvature ratio at t= 3.3500E-01 seconds is: 7.1660E-02 % MHDEQ: TG1= 0.332500 ; TG2= 0.335000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5390E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.1660E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.332500 TO TG2= 0.335000 @ NSTEP 551 GFRAME TG2 MOMENTS CHECKSUM: 9.9114318189720D+03 %MFRCHK - LABEL "BALE0_SGF", # 41= -1.84180E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.84180E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 41= -1.84335E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.84335E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.88918899999999 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 564 TA= 3.35000E-01 CPU TIME= 1.35950E-02 SECONDS. DT= 3.05440E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.359464166666385 %check_save_state: izleft hours = 15.6222222222222 --> plasma_hash("gframe"): TA= 3.350000E-01 NSTEP= 564 Hash code: 31176251 ->PRGCHK: bdy curvature ratio at t= 3.3750E-01 seconds is: 6.6245E-02 % MHDEQ: TG1= 0.335000 ; TG2= 0.337500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6210E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.6245E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.335000 TO TG2= 0.337500 @ NSTEP 564 GFRAME TG2 MOMENTS CHECKSUM: 9.9119047424368D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= 1.24809E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.24809E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= 1.24659E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.24659E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.375000E-01 NSTEP= 589 Hash code: 3772011 ->PRGCHK: bdy curvature ratio at t= 3.4000E-01 seconds is: 6.1248E-02 % MHDEQ: TG1= 0.337500 ; TG2= 0.340000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6450E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.1248E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.337500 TO TG2= 0.340000 @ NSTEP 589 GFRAME TG2 MOMENTS CHECKSUM: 9.9123776659016D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= 1.24487E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.24487E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= 1.24332E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.24332E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 596 TA= 3.38884E-01 CPU TIME= 1.49040E-02 SECONDS. DT= 2.05485E-04 %MFRCHK - LABEL "BALE0_SGF", # 38= -3.94630E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= -3.94630E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87307400000009 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 602 TA= 3.40000E-01 CPU TIME= 1.62430E-02 SECONDS. DT= 9.73785E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.368388611111186 %check_save_state: izleft hours = 15.6130555555556 --> plasma_hash("gframe"): TA= 3.400000E-01 NSTEP= 602 Hash code: 45986331 ->PRGCHK: bdy curvature ratio at t= 3.4250E-01 seconds is: 6.2711E-02 % MHDEQ: TG1= 0.340000 ; TG2= 0.342500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.3540E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.2711E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.340000 TO TG2= 0.342500 @ NSTEP 602 GFRAME TG2 MOMENTS CHECKSUM: 9.8955213793283D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.41672E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.41672E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= 1.42017E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.42017E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.425000E-01 NSTEP= 616 Hash code: 83777112 ->PRGCHK: bdy curvature ratio at t= 3.4500E-01 seconds is: 6.3907E-02 % MHDEQ: TG1= 0.342500 ; TG2= 0.345000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5390E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.3907E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.342500 TO TG2= 0.345000 @ NSTEP 616 GFRAME TG2 MOMENTS CHECKSUM: 9.8786650927550D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.42356E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.42356E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= 1.42755E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.42755E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 620 TA= 3.44060E-01 CPU TIME= 1.37230E-02 SECONDS. DT= 4.47452E-04 %MFRCHK - LABEL "BALE0_SGF", # 37= 2.06076E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= 2.06076E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69703199999981 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 623 TA= 3.45000E-01 CPU TIME= 1.49750E-02 SECONDS. DT= 4.93895E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.376127499999711 %check_save_state: izleft hours = 15.6055555555556 --> plasma_hash("gframe"): TA= 3.450000E-01 NSTEP= 623 Hash code: 38163418 ->PRGCHK: bdy curvature ratio at t= 3.4750E-01 seconds is: 7.1651E-02 % MHDEQ: TG1= 0.345000 ; TG2= 0.347500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.2000E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.1651E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.345000 TO TG2= 0.347500 @ NSTEP 623 GFRAME TG2 MOMENTS CHECKSUM: 9.8493557465311D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.22022E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.22022E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.99673E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.99673E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.22748E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.22748E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.00860E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.00860E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.475000E-01 NSTEP= 643 Hash code: 21588833 ->PRGCHK: bdy curvature ratio at t= 3.5000E-01 seconds is: 8.0019E-02 % MHDEQ: TG1= 0.347500 ; TG2= 0.350000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5300E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.0019E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.347500 TO TG2= 0.350000 @ NSTEP 643 GFRAME TG2 MOMENTS CHECKSUM: 9.8200464003073D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.23492E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.23492E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.02077E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.02077E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24270E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24270E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.03351E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.03351E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.25040E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.25040E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.04611E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.04611E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 2.00883299999987 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 653 TA= 3.50000E-01 CPU TIME= 1.58650E-02 SECONDS. DT= 1.93707E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.384600555555153 %check_save_state: izleft hours = 15.5969444444444 --> plasma_hash("gframe"): TA= 3.500000E-01 NSTEP= 653 Hash code: 63556105 ->PRGCHK: bdy curvature ratio at t= 3.5250E-01 seconds is: 7.2329E-02 % MHDEQ: TG1= 0.350000 ; TG2= 0.352500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1710E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.2329E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.350000 TO TG2= 0.352500 @ NSTEP 653 GFRAME TG2 MOMENTS CHECKSUM: 9.8024403871907D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= -2.07124E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= -2.07124E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= -2.06617E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= -2.06617E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.525000E-01 NSTEP= 666 Hash code: 13117005 ->PRGCHK: bdy curvature ratio at t= 3.5500E-01 seconds is: 6.5129E-02 % MHDEQ: TG1= 0.352500 ; TG2= 0.355000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4830E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.5129E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.352500 TO TG2= 0.355000 @ NSTEP 666 GFRAME TG2 MOMENTS CHECKSUM: 9.7848343740741D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= -2.06188E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= -2.06188E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= -2.05733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= -2.05733E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 678 TA= 3.54964E-01 CPU TIME= 1.61180E-02 SECONDS. DT= 3.60495E-05 %tr_rfprep: rfxqlo setup done, cpu(s) = 1.99325700000009 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 679 TA= 3.55000E-01 CPU TIME= 1.38090E-02 SECONDS. DT= 3.96545E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.392802499999561 %check_save_state: izleft hours = 15.5886111111111 --> plasma_hash("gframe"): TA= 3.550000E-01 NSTEP= 679 Hash code: 39292112 ->PRGCHK: bdy curvature ratio at t= 3.5750E-01 seconds is: 5.8403E-02 % MHDEQ: TG1= 0.355000 ; TG2= 0.357500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8420E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.8403E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.355000 TO TG2= 0.357500 @ NSTEP 679 GFRAME TG2 MOMENTS CHECKSUM: 9.7672283609575D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -1.48718E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.48718E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -1.48307E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.48307E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -1.47923E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.47923E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.575000E-01 NSTEP= 700 Hash code: 27330349 ->PRGCHK: bdy curvature ratio at t= 3.6000E-01 seconds is: 5.2137E-02 % MHDEQ: TG1= 0.357500 ; TG2= 0.360000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0310E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.2137E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.357500 TO TG2= 0.360000 @ NSTEP 700 GFRAME TG2 MOMENTS CHECKSUM: 9.7496223478409D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -1.47499E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.47499E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -1.47000E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.47000E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.89006799999993 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 709 TA= 3.60000E-01 CPU TIME= 1.48320E-02 SECONDS. DT= 2.26303E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.401038055555091 %check_save_state: izleft hours = 15.5805555555556 --> plasma_hash("gframe"): TA= 3.600000E-01 NSTEP= 709 Hash code: 67207729 ->PRGCHK: bdy curvature ratio at t= 3.6250E-01 seconds is: 5.3554E-02 % MHDEQ: TG1= 0.360000 ; TG2= 0.362500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8520E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.3554E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.360000 TO TG2= 0.362500 @ NSTEP 709 GFRAME TG2 MOMENTS CHECKSUM: 9.7439673823562D+03 %MFRCHK - LABEL "BALE0_SGF", # 32= 1.17626E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= 1.17626E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= 1.17936E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= 1.17936E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= 1.18324E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= 1.18324E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.625000E-01 NSTEP= 721 Hash code: 111417750 ->PRGCHK: bdy curvature ratio at t= 3.6500E-01 seconds is: 5.5065E-02 % MHDEQ: TG1= 0.362500 ; TG2= 0.365000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0510E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.5065E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.362500 TO TG2= 0.365000 @ NSTEP 721 GFRAME TG2 MOMENTS CHECKSUM: 9.7383124168714D+03 %MFRCHK - LABEL "BALE0_SGF", # 32= 1.18636E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= 1.18636E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= 1.19022E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= 1.19022E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.73515599999996 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 733 TA= 3.65000E-01 CPU TIME= 1.49190E-02 SECONDS. DT= 1.17385E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.408958888889174 %check_save_state: izleft hours = 15.5725000000000 --> plasma_hash("gframe"): TA= 3.650000E-01 NSTEP= 733 Hash code: 15895191 ->PRGCHK: bdy curvature ratio at t= 3.6750E-01 seconds is: 5.6405E-02 % MHDEQ: TG1= 0.365000 ; TG2= 0.367500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8120E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.6405E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.365000 TO TG2= 0.367500 @ NSTEP 733 GFRAME TG2 MOMENTS CHECKSUM: 9.7526069961162D+03 %MFRCHK - LABEL "BALE0_SGF", # 32= -1.59943E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.59943E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.60379E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.60379E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.60875E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.60875E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.675000E-01 NSTEP= 766 Hash code: 91497858 ->PRGCHK: bdy curvature ratio at t= 3.7000E-01 seconds is: 5.7762E-02 % MHDEQ: TG1= 0.367500 ; TG2= 0.370000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5180E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7762E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.367500 TO TG2= 0.370000 @ NSTEP 766 GFRAME TG2 MOMENTS CHECKSUM: 9.7669015753610D+03 %MFRCHK - LABEL "BALE0_SGF", # 32= -1.61275E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.61275E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 770 TA= 3.68491E-01 CPU TIME= 1.48600E-02 SECONDS. DT= 2.47845E-04 %MFRCHK - LABEL "BALE0_SGF", # 28= 1.74930E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 28= 1.74930E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.98634500000003 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 777 TA= 3.70000E-01 CPU TIME= 1.56650E-02 SECONDS. DT= 2.37085E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.418281388888317 %check_save_state: izleft hours = 15.5633333333333 --> plasma_hash("gframe"): TA= 3.700000E-01 NSTEP= 777 Hash code: 101130164 ->PRGCHK: bdy curvature ratio at t= 3.7250E-01 seconds is: 5.7387E-02 % MHDEQ: TG1= 0.370000 ; TG2= 0.372500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1680E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7387E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.370000 TO TG2= 0.372500 @ NSTEP 777 GFRAME TG2 MOMENTS CHECKSUM: 9.7903348161059D+03 %MFRCHK - LABEL "BALE0_SGF", # 35= -1.24920E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.24920E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 35= -1.24968E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.24968E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 35= -1.25014E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.25014E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.725000E-01 NSTEP= 803 Hash code: 113811627 ->PRGCHK: bdy curvature ratio at t= 3.7500E-01 seconds is: 5.6780E-02 % MHDEQ: TG1= 0.372500 ; TG2= 0.375000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6800E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.6780E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.372500 TO TG2= 0.375000 @ NSTEP 803 GFRAME TG2 MOMENTS CHECKSUM: 9.8137680568508D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 806 TA= 3.73350E-01 CPU TIME= 1.60540E-02 SECONDS. DT= 3.41900E-04 %MFRCHK - LABEL "BALE0_SGF", # 32= -1.17561E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.17561E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.17602E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.17602E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87272800000005 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 811 TA= 3.75000E-01 CPU TIME= 1.35630E-02 SECONDS. DT= 6.92892E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.426931388888988 %check_save_state: izleft hours = 15.5547222222222 --> plasma_hash("gframe"): TA= 3.750000E-01 NSTEP= 811 Hash code: 29313149 ->PRGCHK: bdy curvature ratio at t= 3.7750E-01 seconds is: 5.7235E-02 % MHDEQ: TG1= 0.375000 ; TG2= 0.377500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7040E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7235E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.375000 TO TG2= 0.377500 @ NSTEP 811 GFRAME TG2 MOMENTS CHECKSUM: 9.8272621777966D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.26598E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.26598E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= 1.26454E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.26454E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.775000E-01 NSTEP= 828 Hash code: 47677600 ->PRGCHK: bdy curvature ratio at t= 3.8000E-01 seconds is: 5.7751E-02 % MHDEQ: TG1= 0.377500 ; TG2= 0.380000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7800E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7751E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.377500 TO TG2= 0.380000 @ NSTEP 828 GFRAME TG2 MOMENTS CHECKSUM: 9.8407562987424D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.26329E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.26329E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 830 TA= 3.78169E-01 CPU TIME= 1.59120E-02 SECONDS. DT= 3.85242E-04 %MFRCHK - LABEL "BALE0_SGF", # 42= -2.27914E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -2.27914E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 42= -2.28100E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -2.28100E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.85373099999993 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 835 TA= 3.80000E-01 CPU TIME= 1.49660E-02 SECONDS. DT= 9.91141E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.434972500000185 %check_save_state: izleft hours = 15.5466666666667 --> plasma_hash("gframe"): TA= 3.800000E-01 NSTEP= 835 Hash code: 121894314 ->PRGCHK: bdy curvature ratio at t= 3.8250E-01 seconds is: 6.6714E-02 % MHDEQ: TG1= 0.380000 ; TG2= 0.382500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8130E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.6714E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.380000 TO TG2= 0.382500 @ NSTEP 835 GFRAME TG2 MOMENTS CHECKSUM: 9.8275095530365D+03 %MFRCHK - LABEL "BALE0_SGF", # 35= -1.17691E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.17691E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 35= -1.17868E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.17868E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.825000E-01 NSTEP= 849 Hash code: 116223145 ->PRGCHK: bdy curvature ratio at t= 3.8500E-01 seconds is: 7.6339E-02 % MHDEQ: TG1= 0.382500 ; TG2= 0.385000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7160E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.6339E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.382500 TO TG2= 0.385000 @ NSTEP 849 GFRAME TG2 MOMENTS CHECKSUM: 9.8142628073306D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 850 TA= 3.82842E-01 CPU TIME= 1.56240E-02 SECONDS. DT= 3.76385E-04 %MFRCHK - LABEL "BALE0_SGF", # 30= 1.24943E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= 1.24943E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= 1.25050E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= 1.25050E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.76550100000009 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 855 TA= 3.85000E-01 CPU TIME= 1.49750E-02 SECONDS. DT= 4.52129E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.442680833333270 %check_save_state: izleft hours = 15.5388888888889 --> plasma_hash("gframe"): TA= 3.850000E-01 NSTEP= 855 Hash code: 100344568 ->PRGCHK: bdy curvature ratio at t= 3.8750E-01 seconds is: 6.8110E-02 % MHDEQ: TG1= 0.385000 ; TG2= 0.387500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8290E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.8110E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.385000 TO TG2= 0.387500 @ NSTEP 855 GFRAME TG2 MOMENTS CHECKSUM: 9.8105508400242D+03 %MFRCHK - LABEL "BALE0_SGF", # 30= -1.59699E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.59699E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= -1.59511E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.59511E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 859 TA= 3.86809E-01 CPU TIME= 1.48340E-02 SECONDS. DT= 4.52129E-04 %MFRCHK - LABEL "BALE0_SGF", # 37= -1.54099E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= -1.54099E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.875000E-01 NSTEP= 861 Hash code: 41705685 ->PRGCHK: bdy curvature ratio at t= 3.9000E-01 seconds is: 6.0463E-02 % MHDEQ: TG1= 0.387500 ; TG2= 0.390000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5100E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.0463E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.387500 TO TG2= 0.390000 @ NSTEP 861 GFRAME TG2 MOMENTS CHECKSUM: 9.8068388727178D+03 %MFRCHK - LABEL "BALE0_SGF", # 37= -1.53633E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= -1.53633E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 864 TA= 3.88856E-01 CPU TIME= 1.54420E-02 SECONDS. DT= 4.52129E-04 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.48675E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.48675E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.96001600000022 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 867 TA= 3.90000E-01 CPU TIME= 1.35780E-02 SECONDS. DT= 2.39354E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.450036666667074 %check_save_state: izleft hours = 15.5313888888889 --> plasma_hash("gframe"): TA= 3.900000E-01 NSTEP= 867 Hash code: 36099859 ->PRGCHK: bdy curvature ratio at t= 3.9250E-01 seconds is: 5.6776E-02 ->PRGCHK: bdy curvature ratio at t= 3.9167E-01 seconds is: 5.7996E-02 % MHDEQ: TG1= 0.390000 ; TG2= 0.391667 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8460E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7996E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.390000 TO TG2= 0.391667 @ NSTEP 867 GFRAME TG2 MOMENTS CHECKSUM: 9.7931699792029D+03 %MFRCHK - LABEL "BALE0_SGF", # 36= -1.30289E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.30289E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 36= -1.30049E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.30049E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.916667E-01 NSTEP= 874 Hash code: 70611135 ->PRGCHK: bdy curvature ratio at t= 3.9333E-01 seconds is: 5.5566E-02 % MHDEQ: TG1= 0.391667 ; TG2= 0.393333 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5000E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.5566E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.391667 TO TG2= 0.393333 @ NSTEP 874 GFRAME TG2 MOMENTS CHECKSUM: 9.7795010856880D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 875 TA= 3.91956E-01 CPU TIME= 1.48480E-02 SECONDS. DT= 3.18580E-04 %MFRCHK - LABEL "BALE0_SGF", # 38= -2.27465E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= -2.27465E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.933333E-01 NSTEP= 880 Hash code: 82403456 ->PRGCHK: bdy curvature ratio at t= 3.9500E-01 seconds is: 5.3049E-02 % MHDEQ: TG1= 0.393333 ; TG2= 0.395000 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6440E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.3049E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.393333 TO TG2= 0.395000 @ NSTEP 880 GFRAME TG2 MOMENTS CHECKSUM: 9.7658321921731D+03 %MFRCHK - LABEL "BALE0_SGF", # 38= -2.27009E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= -2.27009E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 882 TA= 3.94034E-01 CPU TIME= 1.55040E-02 SECONDS. DT= 3.50438E-04 %MFRCHK - LABEL "BALE0_SGF", # 36= 1.63243E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= 1.63243E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.95962599999984 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 885 TA= 3.95000E-01 CPU TIME= 1.47900E-02 SECONDS. DT= 2.64914E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.457813333333434 %check_save_state: izleft hours = 15.5236111111111 --> plasma_hash("gframe"): TA= 3.950000E-01 NSTEP= 885 Hash code: 24280866 ->PRGCHK: bdy curvature ratio at t= 3.9667E-01 seconds is: 5.2100E-02 % MHDEQ: TG1= 0.395000 ; TG2= 0.396667 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8610E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.2100E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.395000 TO TG2= 0.396667 @ NSTEP 885 GFRAME TG2 MOMENTS CHECKSUM: 9.7416785753824D+03 %MFRCHK - LABEL "BALE0_SGF", # 36= -1.56277E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.56277E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.966667E-01 NSTEP= 892 Hash code: 16522304 ->PRGCHK: bdy curvature ratio at t= 3.9833E-01 seconds is: 5.1160E-02 % MHDEQ: TG1= 0.396667 ; TG2= 0.398333 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3230E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.1160E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.396667 TO TG2= 0.398333 @ NSTEP 892 GFRAME TG2 MOMENTS CHECKSUM: 9.7175249585917D+03 %MFRCHK - LABEL "BALE0_SGF", # 36= -1.56503E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.56503E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 36= -1.56715E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.56715E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.983333E-01 NSTEP= 899 Hash code: 94769238 ->PRGCHK: bdy curvature ratio at t= 4.0000E-01 seconds is: 5.0229E-02 % MHDEQ: TG1= 0.398333 ; TG2= 0.400000 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.9090E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.0229E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.398333 TO TG2= 0.400000 @ NSTEP 899 GFRAME TG2 MOMENTS CHECKSUM: 9.6933713418010D+03 %MFRCHK - LABEL "BALE0_SGF", # 36= -1.56920E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.56920E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 36= -1.57086E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.57086E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 903 TA= 3.99821E-01 CPU TIME= 1.53520E-02 SECONDS. DT= 1.79011E-04 %tr_rfprep: rfxqlo setup done, cpu(s) = 1.94966099999988 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 904 TA= 4.00000E-01 CPU TIME= 1.47870E-02 SECONDS. DT= 1.96912E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.465559444444352 %check_save_state: izleft hours = 15.5161111111111 --> plasma_hash("gframe"): TA= 4.000000E-01 NSTEP= 904 Hash code: 37991910 ->PRGCHK: bdy curvature ratio at t= 4.0250E-01 seconds is: 4.9665E-02 % MHDEQ: TG1= 0.400000 ; TG2= 0.402500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8690E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.9665E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.400000 TO TG2= 0.402500 @ NSTEP 904 GFRAME TG2 MOMENTS CHECKSUM: 9.6850370879984D+03 %MFRCHK - LABEL "BALE0_SGF", # 33= 1.21318E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 33= 1.21318E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 33= 1.21414E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 33= 1.21414E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.025000E-01 NSTEP= 916 Hash code: 90907306 ->PRGCHK: bdy curvature ratio at t= 4.0500E-01 seconds is: 4.9200E-02 % MHDEQ: TG1= 0.402500 ; TG2= 0.405000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5240E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.9200E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.402500 TO TG2= 0.405000 @ NSTEP 916 GFRAME TG2 MOMENTS CHECKSUM: 9.6767028341958D+03 %MFRCHK - LABEL "BALE0_SGF", # 33= 1.21504E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 33= 1.21504E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 923 TA= 4.04016E-01 CPU TIME= 1.60650E-02 SECONDS. DT= 2.16603E-04 %MFRCHK - LABEL "BALE0_SGF", # 37= 1.70876E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= 1.70876E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.83406200000013 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 928 TA= 4.05000E-01 CPU TIME= 1.50220E-02 SECONDS. DT= 1.17362E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.473548611111710 %check_save_state: izleft hours = 15.5080555555556 --> plasma_hash("gframe"): TA= 4.050000E-01 NSTEP= 928 Hash code: 80811003 ->PRGCHK: bdy curvature ratio at t= 4.0750E-01 seconds is: 4.9130E-02 % MHDEQ: TG1= 0.405000 ; TG2= 0.407500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8700E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.9130E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.405000 TO TG2= 0.407500 @ NSTEP 928 GFRAME TG2 MOMENTS CHECKSUM: 9.7085084967723D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -3.08461E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -3.08461E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -3.07986E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -3.07986E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -3.07560E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -3.07560E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.075000E-01 NSTEP= 949 Hash code: 100121352 ->PRGCHK: bdy curvature ratio at t= 4.1000E-01 seconds is: 4.9201E-02 % MHDEQ: TG1= 0.407500 ; TG2= 0.410000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9420E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.9201E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.407500 TO TG2= 0.410000 @ NSTEP 949 GFRAME TG2 MOMENTS CHECKSUM: 9.7403141593488D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -3.07061E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -3.07061E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 958 TA= 4.08778E-01 CPU TIME= 1.49210E-02 SECONDS. DT= 1.42008E-04 %MFRCHK - LABEL "BALE0_SGF", # 35= 1.45000E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= 1.45000E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.90041400000018 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 967 TA= 4.10000E-01 CPU TIME= 1.54290E-02 SECONDS. DT= 8.58612E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.482580555556069 %check_save_state: izleft hours = 15.4988888888889 --> plasma_hash("gframe"): TA= 4.100000E-01 NSTEP= 967 Hash code: 112728696 ->PRGCHK: bdy curvature ratio at t= 4.1250E-01 seconds is: 5.0220E-02 % MHDEQ: TG1= 0.410000 ; TG2= 0.412500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.3420E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.0220E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.410000 TO TG2= 0.412500 @ NSTEP 967 GFRAME TG2 MOMENTS CHECKSUM: 9.7191849120066D+03 %MFRCHK - LABEL "BALE0_SGF", # 37= 1.79974E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= 1.79974E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 37= 1.79902E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= 1.79902E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 37= 1.79835E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= 1.79835E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.125000E-01 NSTEP= 993 Hash code: 28140192 ->PRGCHK: bdy curvature ratio at t= 4.1500E-01 seconds is: 5.1207E-02 % MHDEQ: TG1= 0.412500 ; TG2= 0.415000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5140E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.1207E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.412500 TO TG2= 0.415000 @ NSTEP 993 GFRAME TG2 MOMENTS CHECKSUM: 9.6980556646644D+03 %MFRCHK - LABEL "BALE0_SGF", # 37= 1.79763E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= 1.79763E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1002 TA= 4.13529E-01 CPU TIME= 1.49800E-02 SECONDS. DT= 1.14281E-04 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.66946E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.66946E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87460200000010 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1014 TA= 4.15000E-01 CPU TIME= 1.35500E-02 SECONDS. DT= 1.00094E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.492351666666309 %check_save_state: izleft hours = 15.4891666666667 --> plasma_hash("gframe"): TA= 4.150000E-01 NSTEP= 1014 Hash code: 76375056 ->PRGCHK: bdy curvature ratio at t= 4.1750E-01 seconds is: 5.0292E-02 % MHDEQ: TG1= 0.415000 ; TG2= 0.417500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6060E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.0292E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.415000 TO TG2= 0.417500 @ NSTEP 1014 GFRAME TG2 MOMENTS CHECKSUM: 9.7001976211711D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= 2.16487E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 2.16487E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 37= 2.44287E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 37= 2.44287E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 2.15833E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 2.15833E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 37= 2.44300E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 37= 2.44300E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 2.15213E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 2.15213E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 37= 2.44312E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 37= 2.44312E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.175000E-01 NSTEP= 1035 Hash code: 30818028 ->PRGCHK: bdy curvature ratio at t= 4.2000E-01 seconds is: 4.9370E-02 % MHDEQ: TG1= 0.417500 ; TG2= 0.420000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5150E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.9370E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.417500 TO TG2= 0.420000 @ NSTEP 1035 GFRAME TG2 MOMENTS CHECKSUM: 9.7023395776778D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1038 TA= 4.17940E-01 CPU TIME= 1.48410E-02 SECONDS. DT= 1.46547E-04 %MFRCHK - LABEL "BALE0_SGF", # 40= 1.22867E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.22867E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 30= -1.63806E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 30= -1.63806E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 1.22531E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.22531E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 30= -1.64402E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 30= -1.64402E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.99690000000010 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1053 TA= 4.20000E-01 CPU TIME= 1.60840E-02 SECONDS. DT= 9.56601E-06 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.501356388888325 %check_save_state: izleft hours = 15.4802777777778 --> plasma_hash("gframe"): TA= 4.200000E-01 NSTEP= 1053 Hash code: 61479959 ->PRGCHK: bdy curvature ratio at t= 4.2250E-01 seconds is: 4.9048E-02 % MHDEQ: TG1= 0.420000 ; TG2= 0.422500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0990E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.9048E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.420000 TO TG2= 0.422500 @ NSTEP 1053 GFRAME TG2 MOMENTS CHECKSUM: 9.6961215841317D+03 %MFRCHK - LABEL "BALE0_SGF", # 35= -1.23061E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.23061E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.24952E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.24952E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 35= -1.23064E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.23064E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.25058E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.25058E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 35= -1.23067E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.23067E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.25153E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.25153E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.225000E-01 NSTEP= 1088 Hash code: 17070488 ->PRGCHK: bdy curvature ratio at t= 4.2500E-01 seconds is: 4.8724E-02 % MHDEQ: TG1= 0.422500 ; TG2= 0.425000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9470E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.8724E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.422500 TO TG2= 0.425000 @ NSTEP 1088 GFRAME TG2 MOMENTS CHECKSUM: 9.6899035905855D+03 %MFRCHK - LABEL "BALE0_SGF", # 35= -1.23073E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.23073E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.25268E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.25268E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1097 TA= 4.24500E-01 CPU TIME= 1.50130E-02 SECONDS. DT= 2.22172E-04 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.63409E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.63409E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 35= 1.19387E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 35= 1.19387E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87094200000001 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1100 TA= 4.25000E-01 CPU TIME= 1.47120E-02 SECONDS. DT= 3.72785E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = T %check_save_state: check at wall_hours = 0.510821666666743 %check_save_state: izleft hours = 15.4708333333333 %wrstf: start call wrstf. %wrstf: open new restart file:138506Z27RS.DAT %wrstf: open138506Z27RS.DAT_NEW, status= 0 %wrstf: record, ier= 1 (ier=1, OK) %wrstf: psload_save %ps_rezone_chk: no rezone operator available (no MHD equilibrium). %ps_rezone_chk: no rezone operator available (no MHD equilibrium). %wrstf: write marker file. %wrstf: transp_rplot_state_backup % RESTART RECORD WRITTEN AT TA= 4.2500000E-01 arrays allocated in pt_diff_data_init arrays allocated in ptsolver_data_init %WRSTF: virtual memory size = 1.394E+03 MB. --> plasma_hash("gframe"): TA= 4.250000E-01 NSTEP= 1100 Hash code: 69298643 ->PRGCHK: bdy curvature ratio at t= 4.2750E-01 seconds is: 4.8544E-02 % MHDEQ: TG1= 0.425000 ; TG2= 0.427500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8880E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.8544E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.425000 TO TG2= 0.427500 @ NSTEP 1100 GFRAME TG2 MOMENTS CHECKSUM: 9.6815955995603D+03 %MFRCHK - LABEL "BALE0_SGF", # 42= 1.98109E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= 1.98109E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 33= 1.24891E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 33= 1.24891E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 42= 1.97737E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= 1.97737E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 33= 1.24884E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 33= 1.24884E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.275000E-01 NSTEP= 1122 Hash code: 36275712 ->PRGCHK: bdy curvature ratio at t= 4.3000E-01 seconds is: 4.8358E-02 % MHDEQ: TG1= 0.427500 ; TG2= 0.430000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5140E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.8358E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.427500 TO TG2= 0.430000 @ NSTEP 1122 GFRAME TG2 MOMENTS CHECKSUM: 9.6732876085350D+03 %MFRCHK - LABEL "BALE0_SGF", # 42= 1.97343E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= 1.97343E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 33= 1.24876E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 33= 1.24876E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 42= 1.96977E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= 1.96977E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 33= 1.24869E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 33= 1.24869E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 42= 1.96670E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= 1.96670E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 33= 1.24864E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 33= 1.24864E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1128 TA= 4.29629E-01 CPU TIME= 1.35460E-02 SECONDS. DT= 3.71491E-04 %tr_rfprep: rfxqlo setup done, cpu(s) = 1.85119500000019 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1129 TA= 4.30000E-01 CPU TIME= 1.57510E-02 SECONDS. DT= 4.08640E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.519070277777246 %check_save_state: izleft hours = 15.4625000000000 --> plasma_hash("gframe"): TA= 4.300000E-01 NSTEP= 1129 Hash code: 57388171 ->PRGCHK: bdy curvature ratio at t= 4.3250E-01 seconds is: 4.8166E-02 % MHDEQ: TG1= 0.430000 ; TG2= 0.432500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1960E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.8166E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.430000 TO TG2= 0.432500 @ NSTEP 1129 GFRAME TG2 MOMENTS CHECKSUM: 9.6649796175098D+03 %MFRCHK - LABEL "BALE0_SGF", # 33= 2.31417E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 33= 2.31417E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 33= 2.31409E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 33= 2.31409E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.325000E-01 NSTEP= 1136 Hash code: 28703242 ->PRGCHK: bdy curvature ratio at t= 4.3500E-01 seconds is: 4.7967E-02 % MHDEQ: TG1= 0.432500 ; TG2= 0.435000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6490E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.7967E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.432500 TO TG2= 0.435000 @ NSTEP 1136 GFRAME TG2 MOMENTS CHECKSUM: 9.6566716264845D+03 %MFRCHK - LABEL "BALE0_SGF", # 33= 2.31397E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 33= 2.31397E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 33= 2.31391E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 33= 2.31391E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 33= 2.31382E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 33= 2.31382E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.88024599999994 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1142 TA= 4.35000E-01 CPU TIME= 1.47320E-02 SECONDS. DT= 2.14345E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.526252777777700 %check_save_state: izleft hours = 15.4552777777778 --> plasma_hash("gframe"): TA= 4.350000E-01 NSTEP= 1142 Hash code: 123098210 ->PRGCHK: bdy curvature ratio at t= 4.3750E-01 seconds is: 4.7761E-02 % MHDEQ: TG1= 0.435000 ; TG2= 0.437500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8280E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.7761E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.435000 TO TG2= 0.437500 @ NSTEP 1142 GFRAME TG2 MOMENTS CHECKSUM: 9.6483636354593D+03 %MFRCHK - LABEL "BALE0_SGF", # 36= -1.81743E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.81743E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 36= -1.81648E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.81648E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.375000E-01 NSTEP= 1151 Hash code: 84935702 ->PRGCHK: bdy curvature ratio at t= 4.4000E-01 seconds is: 4.7421E-02 % MHDEQ: TG1= 0.437500 ; TG2= 0.440000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8300E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.7421E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.437500 TO TG2= 0.440000 @ NSTEP 1151 GFRAME TG2 MOMENTS CHECKSUM: 9.6400556444341D+03 %MFRCHK - LABEL "BALE0_SGF", # 36= -1.81564E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.81564E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 36= -1.81469E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.81469E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 36= -1.81381E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.81381E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86251499999980 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1156 TA= 4.40000E-01 CPU TIME= 1.34270E-02 SECONDS. DT= 4.04372E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.533489166666641 %check_save_state: izleft hours = 15.4480555555556 --> plasma_hash("gframe"): TA= 4.400000E-01 NSTEP= 1156 Hash code: 61422343 ->PRGCHK: bdy curvature ratio at t= 4.4250E-01 seconds is: 4.6965E-02 % MHDEQ: TG1= 0.440000 ; TG2= 0.442500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6450E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.6965E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.440000 TO TG2= 0.442500 @ NSTEP 1156 GFRAME TG2 MOMENTS CHECKSUM: 9.6317476355423D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= -1.28552E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.28552E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= -1.28531E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.28531E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.425000E-01 NSTEP= 1162 Hash code: 50003831 ->PRGCHK: bdy curvature ratio at t= 4.4500E-01 seconds is: 4.6502E-02 % MHDEQ: TG1= 0.442500 ; TG2= 0.445000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.5320E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.6502E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.442500 TO TG2= 0.445000 @ NSTEP 1162 GFRAME TG2 MOMENTS CHECKSUM: 9.6234396266505D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= -1.28506E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.28506E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= -1.28480E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= -1.28480E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.97854699999993 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1166 TA= 4.45000E-01 CPU TIME= 1.47460E-02 SECONDS. DT= 6.00890E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.540329444444524 %check_save_state: izleft hours = 15.4411111111111 --> plasma_hash("gframe"): TA= 4.450000E-01 NSTEP= 1166 Hash code: 25088182 ->PRGCHK: bdy curvature ratio at t= 4.4750E-01 seconds is: 4.9293E-02 % MHDEQ: TG1= 0.445000 ; TG2= 0.447500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8440E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 4.9293E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.445000 TO TG2= 0.447500 @ NSTEP 1166 GFRAME TG2 MOMENTS CHECKSUM: 9.6026420035215D+03 %MFRCHK - LABEL "BALE0_SGF", # 32= -1.65411E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.65411E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.65657E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.65657E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.475000E-01 NSTEP= 1170 Hash code: 14896616 ->PRGCHK: bdy curvature ratio at t= 4.5000E-01 seconds is: 5.2169E-02 % MHDEQ: TG1= 0.447500 ; TG2= 0.450000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5480E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.2169E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.447500 TO TG2= 0.450000 @ NSTEP 1170 GFRAME TG2 MOMENTS CHECKSUM: 9.5818443803925D+03 %MFRCHK - LABEL "BALE0_SGF", # 32= -1.65879E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.65879E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.66023E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.66023E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.66182E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.66182E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.89167300000008 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1174 TA= 4.50000E-01 CPU TIME= 1.47210E-02 SECONDS. DT= 1.02712E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.547149166666259 %check_save_state: izleft hours = 15.4344444444444 --> plasma_hash("gframe"): TA= 4.500000E-01 NSTEP= 1174 Hash code: 46669908 ->PRGCHK: bdy curvature ratio at t= 4.5250E-01 seconds is: 5.4807E-02 % MHDEQ: TG1= 0.450000 ; TG2= 0.452500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0590E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.4807E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.450000 TO TG2= 0.452500 @ NSTEP 1174 GFRAME TG2 MOMENTS CHECKSUM: 9.5610467572635D+03 %MFRCHK - LABEL "BALE0_SGF", # 30= -1.58138E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.58138E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= -1.58295E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.58295E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.525000E-01 NSTEP= 1189 Hash code: 99463985 ->PRGCHK: bdy curvature ratio at t= 4.5500E-01 seconds is: 5.7514E-02 % MHDEQ: TG1= 0.452500 ; TG2= 0.455000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5760E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 5.7514E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.452500 TO TG2= 0.455000 @ NSTEP 1189 GFRAME TG2 MOMENTS CHECKSUM: 9.5402491341345D+03 %MFRCHK - LABEL "BALE0_SGF", # 30= -1.58448E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.58448E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= -1.58599E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.58599E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.89852999999994 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1200 TA= 4.55000E-01 CPU TIME= 1.58140E-02 SECONDS. DT= 8.10744E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.555265277778290 %check_save_state: izleft hours = 15.4263888888889 --> plasma_hash("gframe"): TA= 4.550000E-01 NSTEP= 1200 Hash code: 27335238 ->PRGCHK: bdy curvature ratio at t= 4.5750E-01 seconds is: 6.0287E-02 % MHDEQ: TG1= 0.455000 ; TG2= 0.457500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0840E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.0287E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.455000 TO TG2= 0.457500 @ NSTEP 1200 GFRAME TG2 MOMENTS CHECKSUM: 9.5194515110055D+03 %MFRCHK - LABEL "BALE0_SGF", # 30= 1.24929E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= 1.24929E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= 1.25061E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= 1.25061E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= 1.25184E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= 1.25184E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.575000E-01 NSTEP= 1217 Hash code: 11353156 ->PRGCHK: bdy curvature ratio at t= 4.6000E-01 seconds is: 6.3125E-02 % MHDEQ: TG1= 0.457500 ; TG2= 0.460000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3380E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.3125E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.457500 TO TG2= 0.460000 @ NSTEP 1217 GFRAME TG2 MOMENTS CHECKSUM: 9.4986538878765D+03 %MFRCHK - LABEL "BALE0_SGF", # 30= 1.25326E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= 1.25326E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= 1.25441E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= 1.25441E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.99817299999995 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1226 TA= 4.60000E-01 CPU TIME= 1.55640E-02 SECONDS. DT= 2.92542E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.563327222221687 %check_save_state: izleft hours = 15.4183333333333 --> plasma_hash("gframe"): TA= 4.600000E-01 NSTEP= 1226 Hash code: 96491962 ->PRGCHK: bdy curvature ratio at t= 4.6250E-01 seconds is: 6.6013E-02 % MHDEQ: TG1= 0.460000 ; TG2= 0.462500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1560E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.6013E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.460000 TO TG2= 0.462500 @ NSTEP 1226 GFRAME TG2 MOMENTS CHECKSUM: 9.4778562647475D+03 %MFRCHK - LABEL "BALE0_SGF", # 25= 1.35994E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 25= 1.35994E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 25= 1.36110E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 25= 1.36110E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.625000E-01 NSTEP= 1235 Hash code: 52557941 ->PRGCHK: bdy curvature ratio at t= 4.6500E-01 seconds is: 6.8569E-02 % MHDEQ: TG1= 0.462500 ; TG2= 0.465000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5440E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.8569E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.462500 TO TG2= 0.465000 @ NSTEP 1235 GFRAME TG2 MOMENTS CHECKSUM: 9.4570586416185D+03 %MFRCHK - LABEL "BALE0_SGF", # 25= 1.36290E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 25= 1.36290E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 25= 1.36431E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 25= 1.36431E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 25= 1.36572E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 25= 1.36572E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.89483099999984 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1243 TA= 4.65000E-01 CPU TIME= 1.47130E-02 SECONDS. DT= 5.97814E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.570440833332668 %check_save_state: izleft hours = 15.4111111111111 --> plasma_hash("gframe"): TA= 4.650000E-01 NSTEP= 1243 Hash code: 42113304 ->PRGCHK: bdy curvature ratio at t= 4.6750E-01 seconds is: 7.1166E-02 % MHDEQ: TG1= 0.465000 ; TG2= 0.467500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8530E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.1166E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.465000 TO TG2= 0.467500 @ NSTEP 1243 GFRAME TG2 MOMENTS CHECKSUM: 9.4362610184895D+03 %MFRCHK - LABEL "BALE0_SGF", # 28= 1.30524E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 28= 1.30524E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 28= 1.30649E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 28= 1.30649E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.675000E-01 NSTEP= 1264 Hash code: 6683666 ->PRGCHK: bdy curvature ratio at t= 4.7000E-01 seconds is: 7.3801E-02 % MHDEQ: TG1= 0.467500 ; TG2= 0.470000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5200E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.3801E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.467500 TO TG2= 0.470000 @ NSTEP 1264 GFRAME TG2 MOMENTS CHECKSUM: 9.4154633953605D+03 %MFRCHK - LABEL "BALE0_SGF", # 28= 1.30770E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 28= 1.30770E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 28= 1.30881E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 28= 1.30881E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1271 TA= 4.69551E-01 CPU TIME= 1.47640E-02 SECONDS. DT= 3.32379E-04 %MFRCHK - LABEL "BALE0_SGF", # 37= 1.47039E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= 1.47039E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.93598099999986 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1273 TA= 4.70000E-01 CPU TIME= 1.51650E-02 SECONDS. DT= 1.28573E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.578557499999533 %check_save_state: izleft hours = 15.4030555555556 --> plasma_hash("gframe"): TA= 4.700000E-01 NSTEP= 1273 Hash code: 104342568 ->PRGCHK: bdy curvature ratio at t= 4.7250E-01 seconds is: 7.6474E-02 % MHDEQ: TG1= 0.470000 ; TG2= 0.472500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1700E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.6474E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.470000 TO TG2= 0.472500 @ NSTEP 1273 GFRAME TG2 MOMENTS CHECKSUM: 9.3946657967237D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= -1.63644E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= -1.63644E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= -1.63819E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= -1.63819E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.725000E-01 NSTEP= 1286 Hash code: 82448354 ->PRGCHK: bdy curvature ratio at t= 4.7500E-01 seconds is: 7.9174E-02 % MHDEQ: TG1= 0.472500 ; TG2= 0.475000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3120E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.9174E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.472500 TO TG2= 0.475000 @ NSTEP 1286 GFRAME TG2 MOMENTS CHECKSUM: 9.3738681980869D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= -1.64023E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= -1.64023E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= -1.64198E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= -1.64198E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1291 TA= 4.74076E-01 CPU TIME= 1.36000E-02 SECONDS. DT= 3.33485E-04 %MFRCHK - LABEL "BALE0_SGF", # 30= 1.25015E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= 1.25015E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87620800000013 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1294 TA= 4.75000E-01 CPU TIME= 1.47970E-02 SECONDS. DT= 2.82214E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.585995000000366 %check_save_state: izleft hours = 15.3955555555556 --> plasma_hash("gframe"): TA= 4.750000E-01 NSTEP= 1294 Hash code: 15939814 ->PRGCHK: bdy curvature ratio at t= 4.7750E-01 seconds is: 7.9285E-02 % MHDEQ: TG1= 0.475000 ; TG2= 0.477500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1120E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.9285E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.475000 TO TG2= 0.477500 @ NSTEP 1294 GFRAME TG2 MOMENTS CHECKSUM: 9.3736161246912D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= -1.83243E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.83243E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.82901E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.82901E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.775000E-01 NSTEP= 1302 Hash code: 5728075 ->PRGCHK: bdy curvature ratio at t= 4.8000E-01 seconds is: 7.9408E-02 % MHDEQ: TG1= 0.477500 ; TG2= 0.480000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5400E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.9408E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.477500 TO TG2= 0.480000 @ NSTEP 1302 GFRAME TG2 MOMENTS CHECKSUM: 9.3733640512956D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= -1.82607E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.82607E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1305 TA= 4.78524E-01 CPU TIME= 1.48130E-02 SECONDS. DT= 3.41479E-04 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.37544E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.37544E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.85792999999967 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1310 TA= 4.80000E-01 CPU TIME= 1.47050E-02 SECONDS. DT= 1.20612E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.593087500000365 %check_save_state: izleft hours = 15.3883333333333 --> plasma_hash("gframe"): TA= 4.800000E-01 NSTEP= 1310 Hash code: 9426363 ->PRGCHK: bdy curvature ratio at t= 4.8250E-01 seconds is: 7.7007E-02 % MHDEQ: TG1= 0.480000 ; TG2= 0.482500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8810E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.7007E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.480000 TO TG2= 0.482500 @ NSTEP 1310 GFRAME TG2 MOMENTS CHECKSUM: 9.3294024489431D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -1.50406E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.50406E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= -1.49445E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.49445E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= -1.48538E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.48538E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.825000E-01 NSTEP= 1326 Hash code: 121432410 ->PRGCHK: bdy curvature ratio at t= 4.8500E-01 seconds is: 7.4642E-02 % MHDEQ: TG1= 0.482500 ; TG2= 0.485000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7220E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.4642E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.482500 TO TG2= 0.485000 @ NSTEP 1326 GFRAME TG2 MOMENTS CHECKSUM: 9.2854408465907D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -1.47658E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.47658E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1334 TA= 4.84209E-01 CPU TIME= 1.47520E-02 SECONDS. DT= 2.13672E-04 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.44398E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.44398E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86053000000038 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1338 TA= 4.85000E-01 CPU TIME= 1.34880E-02 SECONDS. DT= 1.64570E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.600984166666422 %check_save_state: izleft hours = 15.3805555555556 --> plasma_hash("gframe"): TA= 4.850000E-01 NSTEP= 1338 Hash code: 73061468 ->PRGCHK: bdy curvature ratio at t= 4.8750E-01 seconds is: 6.9738E-02 % MHDEQ: TG1= 0.485000 ; TG2= 0.487500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6650E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.9738E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.485000 TO TG2= 0.487500 @ NSTEP 1338 GFRAME TG2 MOMENTS CHECKSUM: 9.2502017655607D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 1.80989E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.80989E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= 1.79736E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.79736E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.875000E-01 NSTEP= 1353 Hash code: 90771631 ->PRGCHK: bdy curvature ratio at t= 4.9000E-01 seconds is: 6.5165E-02 % MHDEQ: TG1= 0.487500 ; TG2= 0.490000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3160E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.5165E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.487500 TO TG2= 0.490000 @ NSTEP 1353 GFRAME TG2 MOMENTS CHECKSUM: 9.2149626845306D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 1.78438E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.78438E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= 1.77084E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.77084E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1360 TA= 4.88767E-01 CPU TIME= 1.47910E-02 SECONDS. DT= 1.81027E-04 %MFRCHK - LABEL "BALE0_SGF", # 40= 1.23948E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.23948E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 2.04383099999995 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1367 TA= 4.90000E-01 CPU TIME= 1.56730E-02 SECONDS. DT= 1.46647E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.609765555555896 %check_save_state: izleft hours = 15.3716666666667 --> plasma_hash("gframe"): TA= 4.900000E-01 NSTEP= 1367 Hash code: 103553763 ->PRGCHK: bdy curvature ratio at t= 4.9250E-01 seconds is: 6.5816E-02 % MHDEQ: TG1= 0.490000 ; TG2= 0.492500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.2590E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.5816E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.490000 TO TG2= 0.492500 @ NSTEP 1367 GFRAME TG2 MOMENTS CHECKSUM: 9.1896473053956D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.25910E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.25910E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= -1.24963E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.24963E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.925000E-01 NSTEP= 1385 Hash code: 56326408 ->PRGCHK: bdy curvature ratio at t= 4.9500E-01 seconds is: 6.6577E-02 % MHDEQ: TG1= 0.492500 ; TG2= 0.495000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.7590E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 6.6577E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.492500 TO TG2= 0.495000 @ NSTEP 1385 GFRAME TG2 MOMENTS CHECKSUM: 9.1643319262605D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= -1.24021E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= -1.24021E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1394 TA= 4.93820E-01 CPU TIME= 1.48530E-02 SECONDS. DT= 1.46647E-04 %MFRCHK - LABEL "BALE0_SGF", # 45= -1.54109E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= -1.54109E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 45= -1.52895E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= -1.52895E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69795900000008 lun for writing 138506Z27_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z27_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z27_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1403 TA= 4.95000E-01 CPU TIME= 1.47930E-02 SECONDS. DT= 7.70411E-06 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.618834444444474 %check_save_state: izleft hours = 15.3627777777778 --> plasma_hash("gframe"): TA= 4.950000E-01 NSTEP= 1403 Hash code: 95475829 ->PRGCHK: bdy curvature ratio at t= 4.9750E-01 seconds is: 7.3495E-02 % MHDEQ: TG1= 0.495000 ; TG2= 0.497500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8640E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 7.3495E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.495000 TO TG2= 0.497500 @ NSTEP 1403 GFRAME TG2 MOMENTS CHECKSUM: 9.1402681448321D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 1.80654E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.80654E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= 1.79515E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.79515E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.975000E-01 NSTEP= 1464 Hash code: 38909389 ->PRGCHK: bdy curvature ratio at t= 5.0000E-01 seconds is: 8.2601E-02 % MHDEQ: TG1= 0.497500 ; TG2= 0.500000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3280E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.2601E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.497500 TO TG2= 0.500000 @ NSTEP 1464 GFRAME TG2 MOMENTS CHECKSUM: 9.1162043634036D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 1.78428E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.78428E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1472 TA= 4.98911E-01 CPU TIME= 1.36310E-02 SECONDS. DT= 1.96822E-04 %MFRCHK - LABEL "BALE0_SGF", # 44= -1.33055E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.33055E-38 RESET TO ZERO %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1478 TA= 5.00000E-01 CPU TIME= 1.56600E-02 SECONDS. DT= 6.53375E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.624788333333072 %check_save_state: izleft hours = 15.3566666666667 --> plasma_hash("gframe"): TA= 5.000000E-01 NSTEP= 1478 Hash code: 86965509 ->PRGCHK: bdy curvature ratio at t= 5.0250E-01 seconds is: 8.2601E-02 % MHDEQ: TG1= 0.500000 ; TG2= 0.502500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.1930E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.2601E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.500000 TO TG2= 0.502500 @ NSTEP 1478 GFRAME TG2 MOMENTS CHECKSUM: 9.1162043634036D+03 %MFRCHK - LABEL "BALE0_SGF", # 43= -1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= -1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= -1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= -1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= -1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= -1.25815E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 5.025000E-01 NSTEP= 1502 Hash code: 26927965 ->PRGCHK: bdy curvature ratio at t= 5.0500E-01 seconds is: 8.2601E-02 % MHDEQ: TG1= 0.502500 ; TG2= 0.505000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5270E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.2601E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.502500 TO TG2= 0.505000 @ NSTEP 1502 GFRAME TG2 MOMENTS CHECKSUM: 9.1162043634036D+03 %MFRCHK - LABEL "BALE0_SGF", # 43= -1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= -1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= -1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= -1.25815E-38 RESET TO ZERO %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1517 TA= 5.05000E-01 CPU TIME= 1.48260E-02 SECONDS. DT= 1.55171E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.628481666667085 %check_save_state: izleft hours = 15.3530555555556 --> plasma_hash("gframe"): TA= 5.050000E-01 NSTEP= 1517 Hash code: 48186088 ->PRGCHK: bdy curvature ratio at t= 5.1000E-01 seconds is: 8.2601E-02 % MHDEQ: TG1= 0.505000 ; TG2= 0.510000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8360E-03 SECONDS DATA R*BT AT EDGE: 4.6297E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 8.2601E-02 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.505000 TO TG2= 0.510000 @ NSTEP 1517 GFRAME TG2 MOMENTS CHECKSUM: 9.1162043634036D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.55303E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.55303E-38 RESET TO ZERO ual_close_pulse: [UALLowlevelException = Cannot find context -1 in store] tr_ids_eq_close: can not close IMAS output files 4.2 Call trmpi_end (NORMAL EXIT) trmpi_end2 -I- __MPI undefined 4.2 TERMINATE THE RUN (NORMAL EXIT) CPU TIME USED (hours): 5.04087E-01 %kill_nubeam_server: no server READY file found. ------------ stderr ---------------- (mpi_share_env) process myid= 0 cwd: /local/tr_bleard/transp_compute/NSTX/138506Z27 ==>runtrx: TRANSP run successful ==========(runtrx)====================== ==========TRANSP output conversion====== date: Mon Nov 18 14:29:03 EST 2024 ( mccune010.pppl.gov ) ==========(runtrx)====================== srart tr_finish_mpi.pl false pppl.gov 138506Z27 NSTX ---------------> starting: plotcon 138506Z27 2024/11/18:14:29:03 %initcpl: MDS_CACHE enabled. %PoPlot -- reading .PLN files %POPLT2-- PROCESSING RUN 138506Z27 SHOT NO. 138506 EXPECT 290 SCALAR FCNS, 714 PROFILE FCNS OF TIME "MF" FILE RECORD SIZE = 50 WORDS (FLOATING PT) dmg_datbuf_expand call from dmgini_sized: isize= 0 138506Z27MF.PLN size = 256M %initcpl: MDS_CACHE enabled. [mds_cache_disable: MDS+ cache disabled.] dmg_datbuf_expand call from dmgini_sized: isize= 0 (retry folding filename to lowercase) ...reading TF.PLN header data... cdfcon: NETcdf file datestamp : Mon Nov 18 14:29:19 2024 build_date: call getenv build_date: call ufopen xshare_build.dat cdfcon: Transp common build date : Fri May 3 15:19:16 EDT Define Dimensions 11 define Scalar Fct 290 Define Multi Graphs 281 Write Profiles 714 X 1 1 50 XB 2 2 50 RMJSYM 3 7 205 RMAJM 4 9 101 MCINDX 5 10 220 ILIM 6 12 40 XGRID_NPHI 7 214 3 RGRID 8 665 51 ZGRID 9 666 51 PSIRZ 10 667 2601 %dmgxot_spredm: non-monotonic X axis: #increasing steps: 181275 avg & max steps: 1.2851E-03 3.5782E-03 #decreasing steps: 283488 avg & max steps: 8.2176E-04 2.2038E-03 #zero steps: 403637 B_FIELD 11 668 7803 %dmgxot_spredm: non-monotonic X axis: #increasing steps: 1125111 avg & max steps: 4.9119E-02 7.7032E-01 #decreasing steps: 678987 avg & max steps: 8.1385E-02 3.8993E+00 #zero steps: 801770 read NF File : 291 290 Write Multigraph: 281 ...readback test of .CDF file... 1287 variables, 13 dimensions 15 att ...header check SUCCESSFUL; now check data. ...check profile data... plotcon: CDF files in /local/tr_bleard/transp_compute/NSTX/138506Z27 /local/tr_bleard/transp_compute/NSTX/138506Z27/138506Z27.CDF /local/tr_bleard/transp_compute/NSTX/138506Z27/138506Z27PH.CDF %targz_pseq: no directory: 138506Z27_replay (normal exit) %targz_solv: in /local/tr_bleard/transp_compute/NSTX/138506Z27 on host mccune010 %targz_solv: no TGLF debug info found (normal exit) %targz_solv: no TGLF debug info found (normal exit) --------------->plotcon: normal exit. 2024/11/18:14:29:20 ==>runtrx: TRANSP postprocessing OK ==========(runtrx)====================== ==========TRANSP add to MDSplus ======== date: Mon Nov 18 14:29:20 EST 2024 ( mccune010.pppl.gov ) ==========(runtrx)====================== %mdsplot: call INITPL %initcpl: MDS_CACHE enabled. %mdsplot: call getenv %mdsplot: call ufopen xshare_build.dat %mdsplot: MDSplus controls cleared, server set to local. mds_conopn: option = 4 1385062627 TRANSP_NSTX ...connecting to server: TRANSPGRID.PPPL.GOV ...tcl("EDIT TRANSP_NSTX/SHOT=1385062627") dmg_datbuf_expand call from dmgini_sized: isize= 0 ... reading NetCDF header data ... cdfhrd: size(time) = 2048 cdfhrd: size(time3) = 2048 MDS 1D Put OK MDS 2D Put OK MDS MG Put OK delete node .TRDATA tcl("write") ...mdsplot: normal exit. ==========(runtrx)====================== ==========TRANSP finish and cleanup===== date: Mon Nov 18 14:29:58 EST 2024 ( mccune010.pppl.gov ) ==========(runtrx)====================== %finishup -I- pppl.gov production run %finishup: copying TRANSP permanent output files to /u/tr_bleard/transp/result/NSTX.10 acsort.py: No match. mv 138506Z27.CDF /u/tr_bleard/transp/result/NSTX.10/138506Z27.CDF mv 138506Z27ex.for /u/tr_bleard/transp/result/NSTX.10/138506Z27ex.for mv 138506Z27_mmm.nml /u/tr_bleard/transp/result/NSTX.10/138506Z27_mmm.nml mv 138506Z27PH.CDF /u/tr_bleard/transp/result/NSTX.10/138506Z27PH.CDF mv 138506Z27_pt.nml /u/tr_bleard/transp/result/NSTX.10/138506Z27_pt.nml mv 138506Z27TR.DAT /u/tr_bleard/transp/result/NSTX.10/138506Z27TR.DAT mv 138506Z27TR.INF /u/tr_bleard/transp/result/NSTX.10/138506Z27TR.INF %finishup: retaining 138506Z27tr.log mv 138506Z27TR.MSG /u/tr_bleard/transp/result/NSTX.10/138506Z27TR.MSG mv 138506Z27.yml /u/tr_bleard/transp/result/NSTX.10/138506Z27.yml rm: No match. %finishup -I- both the GRID and the PPPL flags are set. /l/transpgrid/pshare/qshare/138506Z27_NSTX.qarc status 0 ==========(runtrx)====================== ==========>runtrx normal exit<========== date: Mon Nov 18 14:30:00 EST 2024 ( mccune010.pppl.gov ) ==========>runtrx runsite = pppl.gov<======