==>runtrx start: date: Mon Nov 18 18:10:10 EST 2024 ( mccune019.pppl.gov ) argv = 2 iarg = 2 cmd_opt = run runtrx: tok.yy = NSTX.10 ==========(runtrx)====================== date: Mon Nov 18 18:10:10 EST 2024 ( mccune019.pppl.gov ) args: 138506Z29 run ==========(runtrx)====================== ==========(runtrx)====================== ==========TRANSP link & load============ ==========(runtrx)====================== date: Mon Nov 18 18:10:10 EST 2024 ( mccune019.pppl.gov ) --> copy_expert_for: standard expert source copied to: 138506Z29ex.for --> copy_expert_for: up-to-date expert object copied to: 138506Z29ex.o **** uplink 138506Z29tr nolib check_xlibvars: setenv L_NAG (null) check_xlibvars: setenv L_MDESCR (null) check_xlibvars: setenv LMPI_FRANTIC(null) make: `/local/tr_bleard/transp_compute/NSTX/138506Z29/138506Z29ex.o' is up to date. csh -f /local/tr_bleard/transp_compute/NSTX/138506Z29/138506Z29tr.sh csh/linkload detected: C++ libraries requirement with f90 linkage ==>runtrx: TRANSP link successful ==========(runtrx)====================== ==========TRANSP execution============== date: Mon Nov 18 18:10:29 EST 2024 ( mccune019.pppl.gov ) ==========(runtrx)====================== runtrx: Check File System %trmpi_init.f90: LOG_LEVEL env. var.: 1 %trmpi_init.f90: logfile_level: warn !trmpi_init.f90 (rank 0): MAX_MPI_INT_BLOCK environment variable: undefined. D efault value will be used. !trmpi_init.f90 (rank 0): MAX_MPI_R8_BLOCK environment variable: undefined. De fault value will be used. %initcpl: MDS_CACHE enabled. ENTER TRANSP RUN ID, APPEND "R" FOR RESTART: %trmpi_openlog: LOGFILE_LEVEL = warn DATE: Mon Nov 18 18:10:29 2024 TRANSP Version: 24.0.1 TRANSP DOI: 10.11578/dc.20180627.4 Build Date: 2023/10/21 namelist element value field(s): decimal point(s) inserted: XRCNER XRCBOL FRMINI DTMINT DTMING XRCTER %NLIST: open namelist file138506Z29TR.ZDA %trcom_static_box: loading static data %trgdat: NLBCCW= F from PH.CDF file %trgdat: NLJCCW= T from PH.CDF file %trcom_allocate: reallocate: RLIM_PTS %trcom_allocate: reallocate: YLIM_PTS %trgdat: NMOM= 16 %trmpi_set_numprocs: serial TRANSP w/MPI subprocess numprocs= 1. from translation of env. var. "TRANSP_NPROCS". env. var. character value: " 1". ************************** **** TRANSP SERIAL MODE: **** ************************** %datchk: time dependent output resolution (sedit,stedit vs. time: "DTX") detected. %datchk: time dependent geometry timestep (dtmaxg vs. time: "DTG") detected. %datchk: time dependent source timestep (dt_sources vs. time: "DTS") detected. %DATCHK: full equilibrium input DATCHK: CHECKING ARRAY DIMENSIONS, SWITCHES, ETC %DATCHK: NYXINV incremented to be odd: 101 161 %DATCHK: no ECH/ECCD, NLECH=F, %DATCHK: no Lower Hybrid, NLLH=F %DATCKICH: TORIC-5 solver, with numerical MHD equilibrium geometry. %DATCHK: old style ICH antenna geometry converted: RmjIcha,rmnIcha,thIcha -> RgeoAnt,YgeoAnt ONLY element (1) of each array used! %DATCKICH: copy shared parameters to Antenna # 1 %datckich: RF antenna i= 1 non-symmetric Nphi spectrum detected. %datckich for TORIC5: reset NICHCHI from 256 to 64 %datckich for TORIC5: increased NICHPSI from 200 to 320 %DATCKA: ACfile times pre-screen... %DATCKA -- CHECKING NON-DEFAULT SPECIFICATIONS FOR AC FILE I/O GIVEN IN NAMELIST CHARACTER DATA ARRAYS "SELOUT" AND "SELAVG" %ASCXFIN -- AC FILE OPERATION COMPLETED SUCCESSFULLY. %LH_ONOFF: LH on/off times (s): 1.5500E-01 4.7580E-01 %EC_ONOFF: no ECH on/off times found. %icrf_onoff: antenna on/off times defaulted, reset to generic ICRF on/off times: TCRFON, TCRFOF: %ICRF_ONOFF: ICRF on/off times (s): 1.0000E-01 5.0000E-01 %NB_ONOFF: no NBI on/off times found. ps_init_tag: Plasma State v3.000 f90 module initialization. AUXVAL-- INITITIALIZE shared data structures. %DATCKA: ACfile times pre-screen... arrays allocated in pt_diff_data_init arrays allocated in ptsolver_data_init MCINIT: RANDOM NUMBER GEN INITIALIZED - 1308587393 1308587393 %tabort_update: no namelist TABORT requests after t= 0.100000000000000 AUXVAL-- INITIALIZE PLOTTING OUTPUT SYSTEM AUXVAL-- INITIALIZE TEMPERATURE AND DENSITY PROFILES AUXVAL-- GEOMETRY INITIALIZATION PART 2. GFRAM0: bdy curvature ratio OK at t= 1.0500E-01 seconds: 2.4502E-01 GFRAM0: bdy curvature ratio OK at t= 1.0000E-01 seconds: 2.4502E-01 % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 %treqbox_init_tr: clearing eqbox and loading tr attributes %treqbox_init_psirz: loading iso attributes for isolver psi(R,Z) analysis * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0210E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) %get_rygrid: no grids for Psi(R,Y) dmg_datbuf_expand call from dmgini_sized: isize= 0 ...reading TF.PLN header data... ----------------------- %frantic_sorce1 -- resolution increased: previous: 20 ; now: 50 minimum resolution = min(50,nzones) ----------------------- *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 0.00000E+00 CPU TIME= 2.37560E-02 SECONDS. DT= 1.00000E-03 %INITAL: pseudo time advanced to 1.000000E-03 %INITAL: pseudo time advanced to 2.250000E-03 %INITAL: pseudo time advanced to 3.812500E-03 %INITAL: pseudo time advanced to 5.765625E-03 %INITAL: pseudo time advanced to 8.207031E-03 %INITAL: pseudo time advanced to 1.125879E-02 %INITAL: pseudo time advanced to 1.507349E-02 %INITAL: pseudo time advanced to 1.984186E-02 %INITAL: pseudo time advanced to 2.479186E-02 % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7430E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4740E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 2.47919E-02 CPU TIME= 1.42240E-02 SECONDS. DT= 4.95000E-03 %INITAL: pseudo time advanced to 2.974186E-02 %INITAL: pseudo time advanced to 3.469186E-02 %INITAL: pseudo time advanced to 3.964186E-02 %INITAL: pseudo time advanced to 4.459186E-02 % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.2470E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4030E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 4.45919E-02 CPU TIME= 1.42040E-02 SECONDS. DT= 4.95000E-03 %INITAL: pseudo time advanced to 4.954186E-02 %INITAL: pseudo time advanced to 5.449186E-02 %INITAL: pseudo time advanced to 5.944186E-02 %INITAL: pseudo time advanced to 6.439186E-02 % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4870E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3850E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 6.43919E-02 CPU TIME= 1.41630E-02 SECONDS. DT= 4.95000E-03 %INITAL: pseudo time advanced to 6.934186E-02 %INITAL: pseudo time advanced to 7.429186E-02 %INITAL: pseudo time advanced to 7.924186E-02 %INITAL: pseudo time advanced to 8.419186E-02 % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3160E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % MHDEQ: TG1= 0.100000 ; TG2= 0.105000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4600E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 0 TA= 8.41919E-02 CPU TIME= 1.41130E-02 SECONDS. DT= 4.95000E-03 %INITAL: pseudo time advanced to 8.914186E-02 %INITAL: pseudo time advanced to 9.409186E-02 %INITAL: pseudo time advanced to 9.904186E-02 sce_equil_init: Equilibration feature not active (noption_equil <= 0 in namelist). %tr_rfprep: rfxqlo setup done, cpu(s) = 1.81220600000000 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1 TA= 1.00000E-01 CPU TIME= 1.40020E-02 SECONDS. DT= 4.95000E-03 %check_save_state: SLURM_JOB_ID = 6708081 %check_save_state: QSHARE= /p/transpgrid/qshare %check_save_state: nbflag = T %check_save_state: iwrite_now = T %check_save_state: check at wall_hours = 6.302222222529963E-003 %check_save_state: izleft hours = 10.9858333333333 %wrstf: start call wrstf. %wrstf: open new restart file:138506Z29RS.DAT %wrstf: open138506Z29RS.DAT_NEW, status= 0 %wrstf: record, ier= 1 (ier=1, OK) %wrstf: psload_save %ps_rezone_chk: no rezone operator available (no MHD equilibrium). %ps_rezone_chk: no rezone operator available (no MHD equilibrium). %wrstf: write marker file. %wrstf: transp_rplot_state_backup % RESTART RECORD WRITTEN AT TA= 1.0000000E-01 arrays allocated in pt_diff_data_init arrays allocated in ptsolver_data_init %WRSTF: virtual memory size = 1.301E+03 MB. --> plasma_hash("gframe"): TA= 1.000000E-01 NSTEP= 1 Hash code: 22624168 ->PRGCHK: bdy curvature ratio at t= 1.0250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.100000 ; TG2= 0.102500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5900E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.100000 TO TG2= 0.102500 @ NSTEP 1 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 GASFL called from sbrtn pbal GASFL called from sbrtn pbal GASFL called from sbrtn pbal GASFL called from sbrtn pbal GASFL called from sbrtn pbal GASFL called from sbrtn pbal %nclass_geometry: Allocating module variables %nclass_geometry_mod: replacing geometry module variables in the ncbox %nclass_driver: Allocating module variables %nclass_driver_mod: replacing geometry module variables in the ncbox %nclass_geometry: Deallocating module variables %nclass_geometry: Allocating module variables %nclass_geometry_mod: replacing geometry module variables in the ncbox %nclass_driver: Deallocating module variables %nclass_driver: Allocating module variables %nclass_driver_mod: replacing geometry module variables in the ncbox %MFRCHK - LABEL "BALE0_SGF", # 48= -4.88106E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.88106E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.025000E-01 NSTEP= 2 Hash code: 3619205 ->PRGCHK: bdy curvature ratio at t= 1.0500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.102500 ; TG2= 0.105000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4200E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.102500 TO TG2= 0.105000 @ NSTEP 2 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 2 TA= 1.02500E-01 CPU TIME= 1.36820E-02 SECONDS. DT= 2.50000E-03 %MFRCHK - LABEL "BALE0_SGF", # 48= -4.27953E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.27953E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69815400000000 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 3 TA= 1.05000E-01 CPU TIME= 1.32910E-02 SECONDS. DT= 2.50000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 1.602111111151316E-002 %check_save_state: izleft hours = 10.9761111111111 --> plasma_hash("gframe"): TA= 1.050000E-01 NSTEP= 3 Hash code: 41102518 ->PRGCHK: bdy curvature ratio at t= 1.0750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.105000 ; TG2= 0.107500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5550E-03 SECONDS DATA R*BT AT EDGE: 4.6504E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.105000 TO TG2= 0.107500 @ NSTEP 3 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 ?pt_dvs_solver: itmax= 100 ?pt_dvs_solver: too many iterations. ?pt_dvs_solver: debug files written: state files: pt_ta.debug.cdf pt_tb.debug.cdf control obj: ctrl.debug.cdf %MFRCHK - LABEL "BALE0_SGF", # 48= -4.68361E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.68361E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -4.68361E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.68361E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.075000E-01 NSTEP= 5 Hash code: 115267228 ->PRGCHK: bdy curvature ratio at t= 1.1000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.107500 ; TG2= 0.110000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4530E-03 SECONDS DATA R*BT AT EDGE: 4.6496E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.107500 TO TG2= 0.110000 @ NSTEP 5 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -4.68361E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.68361E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -4.68361E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.68361E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87080700000000 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 7 TA= 1.10000E-01 CPU TIME= 1.45770E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 3.158583333333809E-002 %check_save_state: izleft hours = 10.9605555555556 --> plasma_hash("gframe"): TA= 1.100000E-01 NSTEP= 7 Hash code: 71068403 ->PRGCHK: bdy curvature ratio at t= 1.1250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.110000 ; TG2= 0.112500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8320E-03 SECONDS DATA R*BT AT EDGE: 4.6501E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.110000 TO TG2= 0.112500 @ NSTEP 7 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -4.32086E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.32086E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -4.32086E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.32086E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.125000E-01 NSTEP= 9 Hash code: 12186624 ->PRGCHK: bdy curvature ratio at t= 1.1500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.112500 ; TG2= 0.115000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5070E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.112500 TO TG2= 0.115000 @ NSTEP 9 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -4.32086E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.32086E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -4.32086E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.32086E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.70644399999998 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 11 TA= 1.15000E-01 CPU TIME= 1.32970E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 4.244277777752359E-002 %check_save_state: izleft hours = 10.9497222222222 --> plasma_hash("gframe"): TA= 1.150000E-01 NSTEP= 11 Hash code: 63614850 ->PRGCHK: bdy curvature ratio at t= 1.1750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.115000 ; TG2= 0.117500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5770E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.115000 TO TG2= 0.117500 @ NSTEP 11 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.84432E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.84432E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.84432E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.84432E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.175000E-01 NSTEP= 13 Hash code: 14384245 ->PRGCHK: bdy curvature ratio at t= 1.2000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.117500 ; TG2= 0.120000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3400E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.117500 TO TG2= 0.120000 @ NSTEP 13 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.84432E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.84432E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.84432E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.84432E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.81783299999998 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 15 TA= 1.20000E-01 CPU TIME= 1.36930E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 4.987638888906076E-002 %check_save_state: izleft hours = 10.9422222222222 --> plasma_hash("gframe"): TA= 1.200000E-01 NSTEP= 15 Hash code: 116937384 ->PRGCHK: bdy curvature ratio at t= 1.2250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.120000 ; TG2= 0.122500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6140E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.120000 TO TG2= 0.122500 @ NSTEP 15 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.30866E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.30866E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.30866E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.30866E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.225000E-01 NSTEP= 17 Hash code: 30971099 ->PRGCHK: bdy curvature ratio at t= 1.2500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.122500 ; TG2= 0.125000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3010E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.122500 TO TG2= 0.125000 @ NSTEP 17 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.30866E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.30866E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.30866E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.30866E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.81740400000001 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 19 TA= 1.25000E-01 CPU TIME= 1.35680E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 5.893277777749972E-002 %check_save_state: izleft hours = 10.9333333333333 --> plasma_hash("gframe"): TA= 1.250000E-01 NSTEP= 19 Hash code: 20596860 ->PRGCHK: bdy curvature ratio at t= 1.2750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.125000 ; TG2= 0.127500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5760E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.125000 TO TG2= 0.127500 @ NSTEP 19 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.72852E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.72852E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.72852E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.72852E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.275000E-01 NSTEP= 21 Hash code: 36017225 ->PRGCHK: bdy curvature ratio at t= 1.3000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.127500 ; TG2= 0.130000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3160E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.127500 TO TG2= 0.130000 @ NSTEP 21 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.72852E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.72852E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.72852E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.72852E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.68091900000002 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 23 TA= 1.30000E-01 CPU TIME= 1.41210E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 6.568805555662038E-002 %check_save_state: izleft hours = 10.9266666666667 --> plasma_hash("gframe"): TA= 1.300000E-01 NSTEP= 23 Hash code: 45143982 ->PRGCHK: bdy curvature ratio at t= 1.3250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.130000 ; TG2= 0.132500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7530E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.130000 TO TG2= 0.132500 @ NSTEP 23 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= 1.29947E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.29947E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.29947E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.29947E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.325000E-01 NSTEP= 25 Hash code: 110668037 ->PRGCHK: bdy curvature ratio at t= 1.3500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.132500 ; TG2= 0.135000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5120E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.132500 TO TG2= 0.135000 @ NSTEP 25 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.29947E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.29947E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.29947E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.29947E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86167799999998 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 27 TA= 1.35000E-01 CPU TIME= 1.45280E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 7.267944444447494E-002 %check_save_state: izleft hours = 10.9194444444444 --> plasma_hash("gframe"): TA= 1.350000E-01 NSTEP= 27 Hash code: 9527896 ->PRGCHK: bdy curvature ratio at t= 1.3750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.135000 ; TG2= 0.137500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8080E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.135000 TO TG2= 0.137500 @ NSTEP 27 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.39332E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.39332E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.39332E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.39332E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.375000E-01 NSTEP= 29 Hash code: 70342481 ->PRGCHK: bdy curvature ratio at t= 1.4000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.137500 ; TG2= 0.140000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5130E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.137500 TO TG2= 0.140000 @ NSTEP 29 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.39332E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.39332E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -3.39332E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.39332E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.90048100000001 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 31 TA= 1.40000E-01 CPU TIME= 1.44110E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 7.944944444443536E-002 %check_save_state: izleft hours = 10.9127777777778 --> plasma_hash("gframe"): TA= 1.400000E-01 NSTEP= 31 Hash code: 52629248 ->PRGCHK: bdy curvature ratio at t= 1.4250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.140000 ; TG2= 0.142500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0390E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.140000 TO TG2= 0.142500 @ NSTEP 31 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.22802E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.22802E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -3.22802E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.22802E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.425000E-01 NSTEP= 33 Hash code: 29403498 ->PRGCHK: bdy curvature ratio at t= 1.4500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.142500 ; TG2= 0.145000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5420E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.142500 TO TG2= 0.145000 @ NSTEP 33 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.22802E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.22802E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -3.22802E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.22802E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.84517000000000 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 35 TA= 1.45000E-01 CPU TIME= 1.39270E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 8.595555555575629E-002 %check_save_state: izleft hours = 10.9063888888889 --> plasma_hash("gframe"): TA= 1.450000E-01 NSTEP= 35 Hash code: 38075318 ->PRGCHK: bdy curvature ratio at t= 1.4750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.145000 ; TG2= 0.147500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6300E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.145000 TO TG2= 0.147500 @ NSTEP 35 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48516E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48516E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48516E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48516E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.475000E-01 NSTEP= 37 Hash code: 16135468 ->PRGCHK: bdy curvature ratio at t= 1.5000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.147500 ; TG2= 0.150000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4550E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.147500 TO TG2= 0.150000 @ NSTEP 37 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48516E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48516E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48516E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48516E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.81408099999999 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 39 TA= 1.50000E-01 CPU TIME= 1.39720E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 9.209638888887639E-002 %check_save_state: izleft hours = 10.9000000000000 --> plasma_hash("gframe"): TA= 1.500000E-01 NSTEP= 39 Hash code: 56584276 ->PRGCHK: bdy curvature ratio at t= 1.5250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.150000 ; TG2= 0.152500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6750E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.150000 TO TG2= 0.152500 @ NSTEP 39 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -2.87904E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.87904E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.87904E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.87904E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.525000E-01 NSTEP= 41 Hash code: 77139400 ->PRGCHK: bdy curvature ratio at t= 1.5500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.152500 ; TG2= 0.155000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3540E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.152500 TO TG2= 0.155000 @ NSTEP 41 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -2.87904E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.87904E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 42 TA= 1.53750E-01 CPU TIME= 1.40820E-02 SECONDS. DT= 1.25000E-03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.17751E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.17751E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.76817799999998 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 43 TA= 1.55000E-01 CPU TIME= 1.41900E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 9.842527777755095E-002 %check_save_state: izleft hours = 10.8938888888889 --> plasma_hash("gframe"): TA= 1.550000E-01 NSTEP= 43 Hash code: 7113628 ->PRGCHK: bdy curvature ratio at t= 1.5750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.155000 ; TG2= 0.157500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6250E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.155000 TO TG2= 0.157500 @ NSTEP 43 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.34281E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.34281E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -3.34281E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.34281E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.575000E-01 NSTEP= 45 Hash code: 36599762 ->PRGCHK: bdy curvature ratio at t= 1.6000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.157500 ; TG2= 0.160000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4360E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.157500 TO TG2= 0.160000 @ NSTEP 45 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.34281E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.34281E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 46 TA= 1.58750E-01 CPU TIME= 1.42230E-02 SECONDS. DT= 1.25000E-03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.11782E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.11782E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.81586500000003 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 47 TA= 1.60000E-01 CPU TIME= 1.34200E-02 SECONDS. DT= 1.25000E-03 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.104976388889099 %check_save_state: izleft hours = 10.8872222222222 --> plasma_hash("gframe"): TA= 1.600000E-01 NSTEP= 47 Hash code: 76870959 ->PRGCHK: bdy curvature ratio at t= 1.6250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.160000 ; TG2= 0.162500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5610E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.160000 TO TG2= 0.162500 @ NSTEP 47 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.18210E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.18210E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.18210E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.18210E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.625000E-01 NSTEP= 49 Hash code: 66514274 ->PRGCHK: bdy curvature ratio at t= 1.6500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.162500 ; TG2= 0.165000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5430E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.162500 TO TG2= 0.165000 @ NSTEP 49 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 ?pt_dvs_solver: itmax= 100 ?pt_dvs_solver: too many iterations. ?pt_dvs_solver: debug files written: state files: pt_ta.debug.cdf pt_tb.debug.cdf control obj: ctrl.debug.cdf %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.18210E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.18210E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 51 TA= 1.63750E-01 CPU TIME= 1.36330E-02 SECONDS. DT= 6.25000E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48975E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48975E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.72290700000002 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 53 TA= 1.65000E-01 CPU TIME= 1.34270E-02 SECONDS. DT= 6.25000E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.116857222222734 %check_save_state: izleft hours = 10.8752777777778 --> plasma_hash("gframe"): TA= 1.650000E-01 NSTEP= 53 Hash code: 65344438 ->PRGCHK: bdy curvature ratio at t= 1.6750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.165000 ; TG2= 0.167500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8700E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.165000 TO TG2= 0.167500 @ NSTEP 53 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.55863E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.55863E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.55863E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.55863E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.675000E-01 NSTEP= 57 Hash code: 53593243 ->PRGCHK: bdy curvature ratio at t= 1.7000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.167500 ; TG2= 0.170000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3130E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.167500 TO TG2= 0.170000 @ NSTEP 57 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.55863E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.55863E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 60 TA= 1.69375E-01 CPU TIME= 1.36390E-02 SECONDS. DT= 6.25000E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 47= 1.25815E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= 1.25815E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69596000000001 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 61 TA= 1.70000E-01 CPU TIME= 1.34140E-02 SECONDS. DT= 6.25000E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.125128611111450 %check_save_state: izleft hours = 10.8672222222222 --> plasma_hash("gframe"): TA= 1.700000E-01 NSTEP= 61 Hash code: 44558497 ->PRGCHK: bdy curvature ratio at t= 1.7250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.170000 ; TG2= 0.172500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8420E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.170000 TO TG2= 0.172500 @ NSTEP 61 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48057E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48057E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48057E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48057E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.725000E-01 NSTEP= 65 Hash code: 97486126 ->PRGCHK: bdy curvature ratio at t= 1.7500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.172500 ; TG2= 0.175000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5310E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.172500 TO TG2= 0.175000 @ NSTEP 65 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48057E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48057E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.48057E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.48057E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.82288399999999 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 69 TA= 1.75000E-01 CPU TIME= 1.34260E-02 SECONDS. DT= 6.25000E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.142297500000041 %check_save_state: izleft hours = 10.8500000000000 --> plasma_hash("gframe"): TA= 1.750000E-01 NSTEP= 69 Hash code: 38997289 ->PRGCHK: bdy curvature ratio at t= 1.7750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.175000 ; TG2= 0.177500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5610E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.175000 TO TG2= 0.177500 @ NSTEP 69 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.52648E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.52648E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.52648E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.52648E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.775000E-01 NSTEP= 73 Hash code: 112312282 ->PRGCHK: bdy curvature ratio at t= 1.8000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.177500 ; TG2= 0.180000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3190E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.177500 TO TG2= 0.180000 @ NSTEP 73 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.52648E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.52648E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.52648E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.52648E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.71366399999999 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 77 TA= 1.80000E-01 CPU TIME= 1.34410E-02 SECONDS. DT= 6.25000E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.150122499999725 %check_save_state: izleft hours = 10.8422222222222 --> plasma_hash("gframe"): TA= 1.800000E-01 NSTEP= 77 Hash code: 43364565 ->PRGCHK: bdy curvature ratio at t= 1.8250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.180000 ; TG2= 0.182500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5700E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.180000 TO TG2= 0.182500 @ NSTEP 77 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -2.95710E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.95710E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -2.95710E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.95710E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.825000E-01 NSTEP= 81 Hash code: 28236612 ->PRGCHK: bdy curvature ratio at t= 1.8500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.182500 ; TG2= 0.185000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3250E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.182500 TO TG2= 0.185000 @ NSTEP 81 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -2.95710E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.95710E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 83 TA= 1.83750E-01 CPU TIME= 1.36020E-02 SECONDS. DT= 6.25000E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.19688E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.19688E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.73802499999999 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 85 TA= 1.85000E-01 CPU TIME= 1.38500E-02 SECONDS. DT= 6.25000E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.156884722222458 %check_save_state: izleft hours = 10.8352777777778 --> plasma_hash("gframe"): TA= 1.850000E-01 NSTEP= 85 Hash code: 37356110 ->PRGCHK: bdy curvature ratio at t= 1.8750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.185000 ; TG2= 0.187500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5590E-03 SECONDS DATA R*BT AT EDGE: 4.6504E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.185000 TO TG2= 0.187500 @ NSTEP 85 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.38873E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.38873E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.38873E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.38873E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.875000E-01 NSTEP= 89 Hash code: 114759175 ->PRGCHK: bdy curvature ratio at t= 1.9000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.187500 ; TG2= 0.190000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5840E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.187500 TO TG2= 0.190000 @ NSTEP 89 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.38873E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.38873E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 91 TA= 1.88750E-01 CPU TIME= 1.34980E-02 SECONDS. DT= 6.25000E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.89383E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.89383E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.75592000000006 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 93 TA= 1.90000E-01 CPU TIME= 1.34430E-02 SECONDS. DT= 6.25000E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.163814444444597 %check_save_state: izleft hours = 10.8283333333333 --> plasma_hash("gframe"): TA= 1.900000E-01 NSTEP= 93 Hash code: 106526971 ->PRGCHK: bdy curvature ratio at t= 1.9250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.190000 ; TG2= 0.192500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6390E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.190000 TO TG2= 0.192500 @ NSTEP 93 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.36219E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.36219E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.36219E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.36219E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.925000E-01 NSTEP= 97 Hash code: 85292892 ->PRGCHK: bdy curvature ratio at t= 1.9500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.192500 ; TG2= 0.195000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7550E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.192500 TO TG2= 0.195000 @ NSTEP 97 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.36219E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.36219E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 100 TA= 1.94375E-01 CPU TIME= 1.46700E-02 SECONDS. DT= 6.25000E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 44= -1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.17549E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.74181099999998 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 101 TA= 1.95000E-01 CPU TIME= 1.34060E-02 SECONDS. DT= 6.25000E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.170681111111207 %check_save_state: izleft hours = 10.8216666666667 --> plasma_hash("gframe"): TA= 1.950000E-01 NSTEP= 101 Hash code: 55700891 ->PRGCHK: bdy curvature ratio at t= 1.9750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.195000 ; TG2= 0.197500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5800E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.195000 TO TG2= 0.197500 @ NSTEP 101 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.88464E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.88464E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.88464E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.88464E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 1.975000E-01 NSTEP= 105 Hash code: 109654415 ->PRGCHK: bdy curvature ratio at t= 2.0000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.197500 ; TG2= 0.200000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3170E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.197500 TO TG2= 0.200000 @ NSTEP 105 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.88464E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.88464E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -3.88464E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.88464E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.71114599999999 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 109 TA= 2.00000E-01 CPU TIME= 1.46560E-02 SECONDS. DT= 6.25000E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.177928333333057 %check_save_state: izleft hours = 10.8141666666667 --> plasma_hash("gframe"): TA= 2.000000E-01 NSTEP= 109 Hash code: 70379430 ->PRGCHK: bdy curvature ratio at t= 2.0250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.200000 ; TG2= 0.202500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8440E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.200000 TO TG2= 0.202500 @ NSTEP 109 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.40810E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.40810E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.40810E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.40810E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.025000E-01 NSTEP= 113 Hash code: 113920192 ->PRGCHK: bdy curvature ratio at t= 2.0500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.202500 ; TG2= 0.205000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4960E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.202500 TO TG2= 0.205000 @ NSTEP 113 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 114 TA= 2.03125E-01 CPU TIME= 1.46910E-02 SECONDS. DT= 6.25001E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.68361E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.68361E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.68361E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.68361E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86795400000005 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 117 TA= 2.05000E-01 CPU TIME= 1.41350E-02 SECONDS. DT= 6.24998E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.187525277777695 %check_save_state: izleft hours = 10.8047222222222 --> plasma_hash("gframe"): TA= 2.050000E-01 NSTEP= 117 Hash code: 75248718 ->PRGCHK: bdy curvature ratio at t= 2.0750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.205000 ; TG2= 0.207500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7280E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.205000 TO TG2= 0.207500 @ NSTEP 117 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= 1.46937E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.46937E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 45= 1.46937E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.46937E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.075000E-01 NSTEP= 121 Hash code: 64252575 ->PRGCHK: bdy curvature ratio at t= 2.1000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.207500 ; TG2= 0.210000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3950E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.207500 TO TG2= 0.210000 @ NSTEP 121 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= 1.46937E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.46937E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 123 TA= 2.08750E-01 CPU TIME= 1.40560E-02 SECONDS. DT= 6.25005E-04 %MFRCHK - LABEL "BALE0_SGF", # 45= 1.29488E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.29488E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.81060800000000 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 125 TA= 2.10000E-01 CPU TIME= 1.41890E-02 SECONDS. DT= 6.24984E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.195244999999886 %check_save_state: izleft hours = 10.7969444444444 --> plasma_hash("gframe"): TA= 2.100000E-01 NSTEP= 125 Hash code: 61529739 ->PRGCHK: bdy curvature ratio at t= 2.1250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.210000 ; TG2= 0.212500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6480E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.210000 TO TG2= 0.212500 @ NSTEP 125 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.80199E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.80199E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -3.80199E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.80199E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.125000E-01 NSTEP= 129 Hash code: 90118330 ->PRGCHK: bdy curvature ratio at t= 2.1500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.212500 ; TG2= 0.215000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4080E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.212500 TO TG2= 0.215000 @ NSTEP 129 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -3.80199E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -3.80199E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 131 TA= 2.13750E-01 CPU TIME= 1.35050E-02 SECONDS. DT= 6.25048E-04 %MFRCHK - LABEL "BALE0_SGF", # 48= -4.24280E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.24280E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.71545099999992 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 133 TA= 2.15000E-01 CPU TIME= 1.34880E-02 SECONDS. DT= 6.24855E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.203432500000872 %check_save_state: izleft hours = 10.7888888888889 --> plasma_hash("gframe"): TA= 2.150000E-01 NSTEP= 133 Hash code: 97134353 ->PRGCHK: bdy curvature ratio at t= 2.1750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.215000 ; TG2= 0.217500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6160E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.215000 TO TG2= 0.217500 @ NSTEP 133 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -4.00403E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.00403E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -4.00403E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.00403E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.175000E-01 NSTEP= 137 Hash code: 31563982 ->PRGCHK: bdy curvature ratio at t= 2.2000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.217500 ; TG2= 0.220000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3520E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.217500 TO TG2= 0.220000 @ NSTEP 137 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 137 TA= 2.17500E-01 CPU TIME= 1.34890E-02 SECONDS. DT= 6.25435E-04 %MFRCHK - LABEL "BALE0_SGF", # 48= -4.09586E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.09586E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -4.09586E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.09586E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.74918700000001 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 141 TA= 2.20000E-01 CPU TIME= 1.35260E-02 SECONDS. DT= 6.23694E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.210452222222102 %check_save_state: izleft hours = 10.7816666666667 --> plasma_hash("gframe"): TA= 2.200000E-01 NSTEP= 141 Hash code: 30050749 ->PRGCHK: bdy curvature ratio at t= 2.2250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.220000 ; TG2= 0.222500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5760E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.220000 TO TG2= 0.222500 @ NSTEP 141 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -1.57957E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 145 TA= 2.22495E-01 CPU TIME= 1.35510E-02 SECONDS. DT= 5.22600E-06 --> plasma_hash("gframe"): TA= 2.225000E-01 NSTEP= 146 Hash code: 39463928 ->PRGCHK: bdy curvature ratio at t= 2.2500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.222500 ; TG2= 0.225000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3460E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.222500 TO TG2= 0.225000 @ NSTEP 146 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 47= -2.02038E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -2.02038E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 47= -2.02038E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 47= -2.02038E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 150 TA= 2.24995E-01 CPU TIME= 1.35700E-02 SECONDS. DT= 5.22600E-06 %tr_rfprep: rfxqlo setup done, cpu(s) = 1.68840999999998 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 151 TA= 2.25000E-01 CPU TIME= 1.35190E-02 SECONDS. DT= 5.22600E-06 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.217581944445101 %check_save_state: izleft hours = 10.7747222222222 --> plasma_hash("gframe"): TA= 2.250000E-01 NSTEP= 151 Hash code: 4167425 ->PRGCHK: bdy curvature ratio at t= 2.2750E-01 seconds is: 2.4502E-01 ->PRGCHK: bdy curvature ratio at t= 2.2706E-01 seconds is: 2.4502E-01 ->PRGCHK: bdy curvature ratio at t= 2.2696E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.225000 ; TG2= 0.226956 ; DTG= 1.956E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5770E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.225000 TO TG2= 0.226956 @ NSTEP 151 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 42= -1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.28570E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.269557E-01 NSTEP= 211 Hash code: 113680711 ->PRGCHK: bdy curvature ratio at t= 2.2848E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.226956 ; TG2= 0.228478 ; DTG= 1.522E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5480E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.226956 TO TG2= 0.228478 @ NSTEP 211 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 42= -1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.28570E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 216 TA= 2.27507E-01 CPU TIME= 1.45330E-02 SECONDS. DT= 1.10341E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 44= -1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.37753E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 2.284779E-01 NSTEP= 225 Hash code: 49847586 ->PRGCHK: bdy curvature ratio at t= 2.3000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.228478 ; TG2= 0.230000 ; DTG= 1.522E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5160E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.228478 TO TG2= 0.230000 @ NSTEP 225 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 44= -1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.37753E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86811699999998 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 238 TA= 2.30000E-01 CPU TIME= 1.46710E-02 SECONDS. DT= 7.22026E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.229111388889123 %check_save_state: izleft hours = 10.7630555555556 --> plasma_hash("gframe"): TA= 2.300000E-01 NSTEP= 238 Hash code: 110219149 ->PRGCHK: bdy curvature ratio at t= 2.3167E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.230000 ; TG2= 0.231667 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8000E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.230000 TO TG2= 0.231667 @ NSTEP 238 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -5.76727E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -5.76727E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -5.76727E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -5.76727E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.316667E-01 NSTEP= 253 Hash code: 64595506 ->PRGCHK: bdy curvature ratio at t= 2.3333E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.231667 ; TG2= 0.233333 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5360E-03 SECONDS DATA R*BT AT EDGE: 4.6502E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.231667 TO TG2= 0.233333 @ NSTEP 253 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -5.76727E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -5.76727E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -5.76727E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -5.76727E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.333333E-01 NSTEP= 263 Hash code: 28566902 ->PRGCHK: bdy curvature ratio at t= 2.3500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.233333 ; TG2= 0.235000 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5240E-03 SECONDS DATA R*BT AT EDGE: 4.6499E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.233333 TO TG2= 0.235000 @ NSTEP 263 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -5.76727E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -5.76727E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 267 TA= 2.34123E-01 CPU TIME= 1.48530E-02 SECONDS. DT= 2.26603E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86446500000000 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 271 TA= 2.35000E-01 CPU TIME= 1.42250E-02 SECONDS. DT= 1.96729E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.237034166666490 %check_save_state: izleft hours = 10.7552777777778 --> plasma_hash("gframe"): TA= 2.350000E-01 NSTEP= 271 Hash code: 104011007 ->PRGCHK: bdy curvature ratio at t= 2.3750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.235000 ; TG2= 0.237500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6230E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.235000 TO TG2= 0.237500 @ NSTEP 271 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.20405E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.20405E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.20405E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.20405E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.20405E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.20405E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 2.375000E-01 NSTEP= 284 Hash code: 32708045 ->PRGCHK: bdy curvature ratio at t= 2.4000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.237500 ; TG2= 0.240000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4890E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.237500 TO TG2= 0.240000 @ NSTEP 284 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.20405E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.20405E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.20405E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.20405E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.76605799999993 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 297 TA= 2.40000E-01 CPU TIME= 1.48170E-02 SECONDS. DT= 1.53183E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.244251944445296 %check_save_state: izleft hours = 10.7480555555556 --> plasma_hash("gframe"): TA= 2.400000E-01 NSTEP= 297 Hash code: 112123091 ->PRGCHK: bdy curvature ratio at t= 2.4250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.240000 ; TG2= 0.242500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8570E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.240000 TO TG2= 0.242500 @ NSTEP 297 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 43= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 1.34080E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.425000E-01 NSTEP= 312 Hash code: 82667986 ->PRGCHK: bdy curvature ratio at t= 2.4500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.242500 ; TG2= 0.245000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5800E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.242500 TO TG2= 0.245000 @ NSTEP 312 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 43= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 43= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 43= 1.34080E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87244400000009 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 322 TA= 2.45000E-01 CPU TIME= 1.38080E-02 SECONDS. DT= 7.47601E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.251777777777988 %check_save_state: izleft hours = 10.7405555555556 --> plasma_hash("gframe"): TA= 2.450000E-01 NSTEP= 322 Hash code: 52031545 ->PRGCHK: bdy curvature ratio at t= 2.5000E-01 seconds is: 2.4502E-01 ->PRGCHK: bdy curvature ratio at t= 2.4910E-01 seconds is: 2.4502E-01 ->PRGCHK: bdy curvature ratio at t= 2.4890E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.245000 ; TG2= 0.248896 ; DTG= 3.896E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7780E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.245000 TO TG2= 0.248896 @ NSTEP 322 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 46= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 46= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.37753E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.488963E-01 NSTEP= 342 Hash code: 16115916 ->PRGCHK: bdy curvature ratio at t= 2.5000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.248896 ; TG2= 0.250000 ; DTG= 1.104E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3200E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.248896 TO TG2= 0.250000 @ NSTEP 342 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 46= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.37753E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.80871999999999 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 345 TA= 2.50000E-01 CPU TIME= 1.35990E-02 SECONDS. DT= 2.72406E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.258787777778707 %check_save_state: izleft hours = 10.7333333333333 --> plasma_hash("gframe"): TA= 2.500000E-01 NSTEP= 345 Hash code: 10731593 ->PRGCHK: bdy curvature ratio at t= 2.5250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.250000 ; TG2= 0.252500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6750E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.250000 TO TG2= 0.252500 @ NSTEP 345 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.29488E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.29488E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.29488E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.29488E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 2.525000E-01 NSTEP= 355 Hash code: 7524946 ->PRGCHK: bdy curvature ratio at t= 2.5500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.252500 ; TG2= 0.255000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3940E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.252500 TO TG2= 0.255000 @ NSTEP 355 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.29488E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.29488E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.29488E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.29488E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.29488E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.29488E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.75803900000005 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 365 TA= 2.55000E-01 CPU TIME= 1.48680E-02 SECONDS. DT= 4.83481E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.266265833334273 %check_save_state: izleft hours = 10.7261111111111 --> plasma_hash("gframe"): TA= 2.550000E-01 NSTEP= 365 Hash code: 56672771 ->PRGCHK: bdy curvature ratio at t= 2.5750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.255000 ; TG2= 0.257500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8370E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.255000 TO TG2= 0.257500 @ NSTEP 365 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.52447E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.52447E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.575000E-01 NSTEP= 394 Hash code: 107795246 ->PRGCHK: bdy curvature ratio at t= 2.6000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.257500 ; TG2= 0.260000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5680E-03 SECONDS DATA R*BT AT EDGE: 4.6505E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.257500 TO TG2= 0.260000 @ NSTEP 394 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 42= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 42= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 42= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.52447E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.82181400000002 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 410 TA= 2.60000E-01 CPU TIME= 1.42510E-02 SECONDS. DT= 1.14142E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.275160833333302 %check_save_state: izleft hours = 10.7169444444444 --> plasma_hash("gframe"): TA= 2.600000E-01 NSTEP= 410 Hash code: 121757353 ->PRGCHK: bdy curvature ratio at t= 2.6250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.260000 ; TG2= 0.262500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7940E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.260000 TO TG2= 0.262500 @ NSTEP 410 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -2.90200E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.90200E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.90200E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.90200E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.625000E-01 NSTEP= 426 Hash code: 87594259 ->PRGCHK: bdy curvature ratio at t= 2.6500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.262500 ; TG2= 0.265000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5850E-03 SECONDS DATA R*BT AT EDGE: 4.6496E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.262500 TO TG2= 0.265000 @ NSTEP 426 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 48= -2.90200E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.90200E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 48= -2.90200E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -2.90200E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.79439200000002 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 435 TA= 2.65000E-01 CPU TIME= 1.35820E-02 SECONDS. DT= 2.39223E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.282795833334148 %check_save_state: izleft hours = 10.7094444444444 --> plasma_hash("gframe"): TA= 2.650000E-01 NSTEP= 435 Hash code: 71129136 ->PRGCHK: bdy curvature ratio at t= 2.6750E-01 seconds is: 2.4502E-01 ->PRGCHK: bdy curvature ratio at t= 2.6667E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.265000 ; TG2= 0.266667 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6250E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.265000 TO TG2= 0.266667 @ NSTEP 435 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= 2.51629E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.51629E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 45= 2.51629E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.51629E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.666667E-01 NSTEP= 442 Hash code: 47532524 ->PRGCHK: bdy curvature ratio at t= 2.6833E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.266667 ; TG2= 0.268333 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5250E-03 SECONDS DATA R*BT AT EDGE: 4.6504E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.266667 TO TG2= 0.268333 @ NSTEP 442 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= 2.51629E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.51629E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 45= 2.51629E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.51629E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.683333E-01 NSTEP= 449 Hash code: 23941181 ->PRGCHK: bdy curvature ratio at t= 2.7000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.268333 ; TG2= 0.270000 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3850E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.268333 TO TG2= 0.270000 @ NSTEP 449 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.51629E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.51629E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.68366600000002 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 456 TA= 2.70000E-01 CPU TIME= 1.36530E-02 SECONDS. DT= 2.28149E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.289943611111084 %check_save_state: izleft hours = 10.7022222222222 --> plasma_hash("gframe"): TA= 2.700000E-01 NSTEP= 456 Hash code: 86258101 ->PRGCHK: bdy curvature ratio at t= 2.7250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.270000 ; TG2= 0.272500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5920E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.270000 TO TG2= 0.272500 @ NSTEP 456 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.17549E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.17549E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 2.725000E-01 NSTEP= 466 Hash code: 30412341 ->PRGCHK: bdy curvature ratio at t= 2.7500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.272500 ; TG2= 0.275000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5260E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.272500 TO TG2= 0.275000 @ NSTEP 466 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.17549E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.17549E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.17549E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.78163600000016 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 476 TA= 2.75000E-01 CPU TIME= 1.36230E-02 SECONDS. DT= 1.54627E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.297085277778024 %check_save_state: izleft hours = 10.6952777777778 --> plasma_hash("gframe"): TA= 2.750000E-01 NSTEP= 476 Hash code: 105711623 ->PRGCHK: bdy curvature ratio at t= 2.7750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.275000 ; TG2= 0.277500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6640E-03 SECONDS DATA R*BT AT EDGE: 4.6505E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.275000 TO TG2= 0.277500 @ NSTEP 476 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.55504E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.55504E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.55504E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.55504E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 2.775000E-01 NSTEP= 510 Hash code: 121260609 ->PRGCHK: bdy curvature ratio at t= 2.8000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.277500 ; TG2= 0.280000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4000E-03 SECONDS DATA R*BT AT EDGE: 4.6499E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.277500 TO TG2= 0.280000 @ NSTEP 510 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.55504E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.55504E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 48= -4.55504E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 48= -4.55504E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.80697800000007 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 525 TA= 2.80000E-01 CPU TIME= 1.52580E-02 SECONDS. DT= 1.00350E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.305703055556023 %check_save_state: izleft hours = 10.6863888888889 --> plasma_hash("gframe"): TA= 2.800000E-01 NSTEP= 525 Hash code: 95282563 ->PRGCHK: bdy curvature ratio at t= 2.8250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.280000 ; TG2= 0.282500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7950E-03 SECONDS DATA R*BT AT EDGE: 4.6502E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.280000 TO TG2= 0.282500 @ NSTEP 525 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.57957E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.57957E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.825000E-01 NSTEP= 539 Hash code: 70280465 ->PRGCHK: bdy curvature ratio at t= 2.8500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.282500 ; TG2= 0.285000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3810E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.282500 TO TG2= 0.285000 @ NSTEP 539 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= -1.57957E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= -1.57957E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.71629200000007 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 547 TA= 2.85000E-01 CPU TIME= 1.36800E-02 SECONDS. DT= 3.24943E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.312695555556274 %check_save_state: izleft hours = 10.6794444444444 --> plasma_hash("gframe"): TA= 2.850000E-01 NSTEP= 547 Hash code: 67720437 ->PRGCHK: bdy curvature ratio at t= 2.8750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.285000 ; TG2= 0.287500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6150E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.285000 TO TG2= 0.287500 @ NSTEP 547 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.21223E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.875000E-01 NSTEP= 553 Hash code: 103630271 ->PRGCHK: bdy curvature ratio at t= 2.9000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.287500 ; TG2= 0.290000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5780E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.287500 TO TG2= 0.290000 @ NSTEP 553 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 44= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 44= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 44= 1.21223E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.72269399999982 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 558 TA= 2.90000E-01 CPU TIME= 1.42770E-02 SECONDS. DT= 1.48035E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.319027222223212 %check_save_state: izleft hours = 10.6733333333333 --> plasma_hash("gframe"): TA= 2.900000E-01 NSTEP= 558 Hash code: 8083532 ->PRGCHK: bdy curvature ratio at t= 2.9250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.290000 ; TG2= 0.292500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8900E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.290000 TO TG2= 0.292500 @ NSTEP 558 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.21223E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.925000E-01 NSTEP= 572 Hash code: 93369647 ->PRGCHK: bdy curvature ratio at t= 2.9500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.292500 ; TG2= 0.295000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6350E-03 SECONDS DATA R*BT AT EDGE: 4.6496E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.292500 TO TG2= 0.295000 @ NSTEP 572 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.21223E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.85511300000007 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 580 TA= 2.95000E-01 CPU TIME= 1.48110E-02 SECONDS. DT= 1.31563E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.326703055556209 %check_save_state: izleft hours = 10.6655555555556 --> plasma_hash("gframe"): TA= 2.950000E-01 NSTEP= 580 Hash code: 38466302 ->PRGCHK: bdy curvature ratio at t= 2.9750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.295000 ; TG2= 0.297500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 6.1510E-03 SECONDS DATA R*BT AT EDGE: 4.6502E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.295000 TO TG2= 0.297500 @ NSTEP 580 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 2.975000E-01 NSTEP= 613 Hash code: 93007625 ->PRGCHK: bdy curvature ratio at t= 3.0000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.297500 ; TG2= 0.300000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3760E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.297500 TO TG2= 0.300000 @ NSTEP 613 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.71735999999987 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 621 TA= 3.00000E-01 CPU TIME= 1.36810E-02 SECONDS. DT= 1.44910E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.334816666667393 %check_save_state: izleft hours = 10.6575000000000 --> plasma_hash("gframe"): TA= 3.000000E-01 NSTEP= 621 Hash code: 108158734 ->PRGCHK: bdy curvature ratio at t= 3.0250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.300000 ; TG2= 0.302500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6890E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.300000 TO TG2= 0.302500 @ NSTEP 621 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 45= 1.61630E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.61630E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.61630E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.61630E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 3.025000E-01 NSTEP= 634 Hash code: 105948 ->PRGCHK: bdy curvature ratio at t= 3.0500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.302500 ; TG2= 0.305000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3960E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.302500 TO TG2= 0.305000 @ NSTEP 634 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.61630E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.61630E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.61630E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.61630E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.72773899999993 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 644 TA= 3.05000E-01 CPU TIME= 1.47130E-02 SECONDS. DT= 3.65093E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.341873611111623 %check_save_state: izleft hours = 10.6502777777778 --> plasma_hash("gframe"): TA= 3.050000E-01 NSTEP= 644 Hash code: 57540153 ->PRGCHK: bdy curvature ratio at t= 3.0750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.305000 ; TG2= 0.307500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8750E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.305000 TO TG2= 0.307500 @ NSTEP 644 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.45100E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.45100E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.45100E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.45100E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.45100E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.45100E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 3.075000E-01 NSTEP= 668 Hash code: 84808314 ->PRGCHK: bdy curvature ratio at t= 3.1000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.307500 ; TG2= 0.310000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3920E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.307500 TO TG2= 0.310000 @ NSTEP 668 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.45100E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.45100E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.45100E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.45100E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.72645200000011 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 678 TA= 3.10000E-01 CPU TIME= 1.48980E-02 SECONDS. DT= 5.57890E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.349545833334105 %check_save_state: izleft hours = 10.6427777777778 --> plasma_hash("gframe"): TA= 3.100000E-01 NSTEP= 678 Hash code: 35415848 ->PRGCHK: bdy curvature ratio at t= 3.1250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.310000 ; TG2= 0.312500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7400E-03 SECONDS DATA R*BT AT EDGE: 4.6505E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.310000 TO TG2= 0.312500 @ NSTEP 678 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.23060E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.23060E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.125000E-01 NSTEP= 697 Hash code: 77877394 ->PRGCHK: bdy curvature ratio at t= 3.1500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.312500 ; TG2= 0.315000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3830E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.312500 TO TG2= 0.315000 @ NSTEP 697 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.23060E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.74361300000010 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 705 TA= 3.15000E-01 CPU TIME= 1.36680E-02 SECONDS. DT= 2.29748E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.356951666667101 %check_save_state: izleft hours = 10.6352777777778 --> plasma_hash("gframe"): TA= 3.150000E-01 NSTEP= 705 Hash code: 101428703 ->PRGCHK: bdy curvature ratio at t= 3.1750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.315000 ; TG2= 0.317500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6670E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.315000 TO TG2= 0.317500 @ NSTEP 705 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.63467E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.175000E-01 NSTEP= 714 Hash code: 109689519 ->PRGCHK: bdy curvature ratio at t= 3.2000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.317500 ; TG2= 0.320000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6570E-03 SECONDS DATA R*BT AT EDGE: 4.6505E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.317500 TO TG2= 0.320000 @ NSTEP 714 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 40= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 40= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 40= 1.63467E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.78969400000005 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 720 TA= 3.20000E-01 CPU TIME= 1.40400E-02 SECONDS. DT= 3.32349E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.363580277777601 %check_save_state: izleft hours = 10.6286111111111 --> plasma_hash("gframe"): TA= 3.200000E-01 NSTEP= 720 Hash code: 35583759 ->PRGCHK: bdy curvature ratio at t= 3.2250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.320000 ; TG2= 0.322500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7000E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.320000 TO TG2= 0.322500 @ NSTEP 720 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.28570E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.225000E-01 NSTEP= 727 Hash code: 12254956 ->PRGCHK: bdy curvature ratio at t= 3.2500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.322500 ; TG2= 0.325000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5320E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.322500 TO TG2= 0.325000 @ NSTEP 727 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.28570E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.80121800000006 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 733 TA= 3.25000E-01 CPU TIME= 1.49210E-02 SECONDS. DT= 5.13620E-06 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.370299722222171 %check_save_state: izleft hours = 10.6219444444444 --> plasma_hash("gframe"): TA= 3.250000E-01 NSTEP= 733 Hash code: 82811133 ->PRGCHK: bdy curvature ratio at t= 3.2750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.325000 ; TG2= 0.327500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9060E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.325000 TO TG2= 0.327500 @ NSTEP 733 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.21223E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.275000E-01 NSTEP= 774 Hash code: 43043501 ->PRGCHK: bdy curvature ratio at t= 3.3000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.327500 ; TG2= 0.330000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6080E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.327500 TO TG2= 0.330000 @ NSTEP 774 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.21223E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 34= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.21223E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 34= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.21223E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86653200000001 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 782 TA= 3.30000E-01 CPU TIME= 1.48470E-02 SECONDS. DT= 3.24065E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.379538888889783 %check_save_state: izleft hours = 10.6127777777778 --> plasma_hash("gframe"): TA= 3.300000E-01 NSTEP= 782 Hash code: 87821365 ->PRGCHK: bdy curvature ratio at t= 3.3250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.330000 ; TG2= 0.332500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9790E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.330000 TO TG2= 0.332500 @ NSTEP 782 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 38= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= -1.78161E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 38= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= -1.78161E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 3.325000E-01 NSTEP= 790 Hash code: 95180804 ->PRGCHK: bdy curvature ratio at t= 3.3500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.332500 ; TG2= 0.335000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6520E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.332500 TO TG2= 0.335000 @ NSTEP 790 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 38= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 38= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 38= -1.78161E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.85142000000019 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 798 TA= 3.35000E-01 CPU TIME= 1.44210E-02 SECONDS. DT= 6.95093E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.386558333333596 %check_save_state: izleft hours = 10.6055555555556 --> plasma_hash("gframe"): TA= 3.350000E-01 NSTEP= 798 Hash code: 92603210 ->PRGCHK: bdy curvature ratio at t= 3.3750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.335000 ; TG2= 0.337500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7750E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.335000 TO TG2= 0.337500 @ NSTEP 798 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.17549E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.375000E-01 NSTEP= 817 Hash code: 89171291 ->PRGCHK: bdy curvature ratio at t= 3.4000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.337500 ; TG2= 0.340000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3730E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.337500 TO TG2= 0.340000 @ NSTEP 817 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.17549E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.73051899999996 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 826 TA= 3.40000E-01 CPU TIME= 1.64690E-02 SECONDS. DT= 2.51048E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.394107777778117 %check_save_state: izleft hours = 10.5980555555556 --> plasma_hash("gframe"): TA= 3.400000E-01 NSTEP= 826 Hash code: 108925414 ->PRGCHK: bdy curvature ratio at t= 3.4250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.340000 ; TG2= 0.342500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.0720E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.340000 TO TG2= 0.342500 @ NSTEP 826 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.425000E-01 NSTEP= 836 Hash code: 71299961 ->PRGCHK: bdy curvature ratio at t= 3.4500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.342500 ; TG2= 0.345000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5320E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.342500 TO TG2= 0.345000 @ NSTEP 836 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.88584999999989 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 846 TA= 3.45000E-01 CPU TIME= 1.47600E-02 SECONDS. DT= 2.40567E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.401989166667136 %check_save_state: izleft hours = 10.5902777777778 --> plasma_hash("gframe"): TA= 3.450000E-01 NSTEP= 846 Hash code: 43702693 ->PRGCHK: bdy curvature ratio at t= 3.4750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.345000 ; TG2= 0.347500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9380E-03 SECONDS DATA R*BT AT EDGE: 4.6505E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.345000 TO TG2= 0.347500 @ NSTEP 846 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.26733E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.475000E-01 NSTEP= 856 Hash code: 59759391 ->PRGCHK: bdy curvature ratio at t= 3.5000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.347500 ; TG2= 0.350000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5100E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.347500 TO TG2= 0.350000 @ NSTEP 856 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.26733E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.82824800000003 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 863 TA= 3.50000E-01 CPU TIME= 1.43220E-02 SECONDS. DT= 4.74986E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.408946666667816 %check_save_state: izleft hours = 10.5833333333333 --> plasma_hash("gframe"): TA= 3.500000E-01 NSTEP= 863 Hash code: 58089068 ->PRGCHK: bdy curvature ratio at t= 3.5250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.350000 ; TG2= 0.352500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8660E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.350000 TO TG2= 0.352500 @ NSTEP 863 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.24896E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.525000E-01 NSTEP= 869 Hash code: 104249890 ->PRGCHK: bdy curvature ratio at t= 3.5500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.352500 ; TG2= 0.355000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3860E-03 SECONDS DATA R*BT AT EDGE: 4.6502E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.352500 TO TG2= 0.355000 @ NSTEP 869 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.24896E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.69421899999998 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 875 TA= 3.55000E-01 CPU TIME= 1.35920E-02 SECONDS. DT= 8.53281E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.415330833333428 %check_save_state: izleft hours = 10.5769444444444 --> plasma_hash("gframe"): TA= 3.550000E-01 NSTEP= 875 Hash code: 45633674 ->PRGCHK: bdy curvature ratio at t= 3.5750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.355000 ; TG2= 0.357500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9160E-03 SECONDS DATA R*BT AT EDGE: 4.6494E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.355000 TO TG2= 0.357500 @ NSTEP 875 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.56120E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.575000E-01 NSTEP= 890 Hash code: 85312293 ->PRGCHK: bdy curvature ratio at t= 3.6000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.357500 ; TG2= 0.360000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5370E-03 SECONDS DATA R*BT AT EDGE: 4.6486E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.357500 TO TG2= 0.360000 @ NSTEP 890 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.56120E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.71854499999995 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 897 TA= 3.60000E-01 CPU TIME= 1.36230E-02 SECONDS. DT= 1.33585E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.422567777778568 %check_save_state: izleft hours = 10.5697222222222 --> plasma_hash("gframe"): TA= 3.600000E-01 NSTEP= 897 Hash code: 34309798 ->PRGCHK: bdy curvature ratio at t= 3.6250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.360000 ; TG2= 0.362500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6480E-03 SECONDS DATA R*BT AT EDGE: 4.6498E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.360000 TO TG2= 0.362500 @ NSTEP 897 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.94691E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.94691E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.94691E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.94691E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 3.625000E-01 NSTEP= 913 Hash code: 77908247 ->PRGCHK: bdy curvature ratio at t= 3.6500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.362500 ; TG2= 0.365000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6440E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.362500 TO TG2= 0.365000 @ NSTEP 913 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.94691E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.94691E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.94691E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.94691E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.70608500000003 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 923 TA= 3.65000E-01 CPU TIME= 1.36150E-02 SECONDS. DT= 1.23838E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.430005833334235 %check_save_state: izleft hours = 10.5622222222222 --> plasma_hash("gframe"): TA= 3.650000E-01 NSTEP= 923 Hash code: 92668455 ->PRGCHK: bdy curvature ratio at t= 3.6750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.365000 ; TG2= 0.367500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 5.8860E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.365000 TO TG2= 0.367500 @ NSTEP 923 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.78161E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.78161E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.78161E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.675000E-01 NSTEP= 936 Hash code: 10149899 ->PRGCHK: bdy curvature ratio at t= 3.7000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.367500 ; TG2= 0.370000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4340E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.367500 TO TG2= 0.370000 @ NSTEP 936 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.78161E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.71858399999996 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 944 TA= 3.70000E-01 CPU TIME= 1.36880E-02 SECONDS. DT= 1.63978E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.436927222222948 %check_save_state: izleft hours = 10.5552777777778 --> plasma_hash("gframe"): TA= 3.700000E-01 NSTEP= 944 Hash code: 31232310 ->PRGCHK: bdy curvature ratio at t= 3.7250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.370000 ; TG2= 0.372500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9810E-03 SECONDS DATA R*BT AT EDGE: 4.6504E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.370000 TO TG2= 0.372500 @ NSTEP 944 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.725000E-01 NSTEP= 956 Hash code: 108290451 ->PRGCHK: bdy curvature ratio at t= 3.7500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.372500 ; TG2= 0.375000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3800E-03 SECONDS DATA R*BT AT EDGE: 4.6501E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.372500 TO TG2= 0.375000 @ NSTEP 956 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87643099999991 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 965 TA= 3.75000E-01 CPU TIME= 1.51280E-02 SECONDS. DT= 4.80571E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.444298333333791 %check_save_state: izleft hours = 10.5480555555556 --> plasma_hash("gframe"): TA= 3.750000E-01 NSTEP= 965 Hash code: 103785087 ->PRGCHK: bdy curvature ratio at t= 3.7750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.375000 ; TG2= 0.377500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9310E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.375000 TO TG2= 0.377500 @ NSTEP 965 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 36= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 36= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 3.775000E-01 NSTEP= 985 Hash code: 91224071 ->PRGCHK: bdy curvature ratio at t= 3.8000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.377500 ; TG2= 0.380000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6300E-03 SECONDS DATA R*BT AT EDGE: 4.6512E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.377500 TO TG2= 0.380000 @ NSTEP 985 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 36= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 36= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 36= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= -1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86317900000017 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 992 TA= 3.80000E-01 CPU TIME= 1.36030E-02 SECONDS. DT= 3.14435E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.451974444444204 %check_save_state: izleft hours = 10.5402777777778 --> plasma_hash("gframe"): TA= 3.800000E-01 NSTEP= 992 Hash code: 113731855 ->PRGCHK: bdy curvature ratio at t= 3.8250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.380000 ; TG2= 0.382500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6080E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.380000 TO TG2= 0.382500 @ NSTEP 992 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 32= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.52447E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 32= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.52447E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.825000E-01 NSTEP= 1000 Hash code: 91116183 ->PRGCHK: bdy curvature ratio at t= 3.8500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.382500 ; TG2= 0.385000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3620E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.382500 TO TG2= 0.385000 @ NSTEP 1000 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 32= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.52447E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.79600700000015 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1008 TA= 3.85000E-01 CPU TIME= 1.50420E-02 SECONDS. DT= 8.67334E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.458971111111168 %check_save_state: izleft hours = 10.5333333333333 --> plasma_hash("gframe"): TA= 3.850000E-01 NSTEP= 1008 Hash code: 32331172 ->PRGCHK: bdy curvature ratio at t= 3.8750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.385000 ; TG2= 0.387500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8970E-03 SECONDS DATA R*BT AT EDGE: 4.6501E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.385000 TO TG2= 0.387500 @ NSTEP 1008 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.92855E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.92855E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.92855E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.92855E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 3.875000E-01 NSTEP= 1024 Hash code: 96278431 ->PRGCHK: bdy curvature ratio at t= 3.9000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.387500 ; TG2= 0.390000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6880E-03 SECONDS DATA R*BT AT EDGE: 4.6495E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.387500 TO TG2= 0.390000 @ NSTEP 1024 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.92855E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.92855E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.92855E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.92855E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.92855E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.92855E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.85302000000001 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1033 TA= 3.90000E-01 CPU TIME= 1.41860E-02 SECONDS. DT= 1.38461E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.466596666667556 %check_save_state: izleft hours = 10.5255555555556 --> plasma_hash("gframe"): TA= 3.900000E-01 NSTEP= 1033 Hash code: 95979729 ->PRGCHK: bdy curvature ratio at t= 3.9250E-01 seconds is: 2.4502E-01 ->PRGCHK: bdy curvature ratio at t= 3.9167E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.390000 ; TG2= 0.391667 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7500E-03 SECONDS DATA R*BT AT EDGE: 4.6499E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.390000 TO TG2= 0.391667 @ NSTEP 1033 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 32= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.26733E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.916667E-01 NSTEP= 1042 Hash code: 113475888 ->PRGCHK: bdy curvature ratio at t= 3.9333E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.391667 ; TG2= 0.393333 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3620E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.391667 TO TG2= 0.393333 @ NSTEP 1042 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 32= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 32= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.26733E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.933333E-01 NSTEP= 1048 Hash code: 9905763 ->PRGCHK: bdy curvature ratio at t= 3.9500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.393333 ; TG2= 0.395000 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5320E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.393333 TO TG2= 0.395000 @ NSTEP 1048 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 32= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.68489900000009 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1052 TA= 3.95000E-01 CPU TIME= 1.39800E-02 SECONDS. DT= 2.51141E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.473500555555802 %check_save_state: izleft hours = 10.5186111111111 --> plasma_hash("gframe"): TA= 3.950000E-01 NSTEP= 1052 Hash code: 109450311 ->PRGCHK: bdy curvature ratio at t= 3.9667E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.395000 ; TG2= 0.396667 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6800E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.395000 TO TG2= 0.396667 @ NSTEP 1052 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 3.966667E-01 NSTEP= 1058 Hash code: 107230949 ->PRGCHK: bdy curvature ratio at t= 3.9833E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.396667 ; TG2= 0.398333 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5600E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.396667 TO TG2= 0.398333 @ NSTEP 1058 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 3.983333E-01 NSTEP= 1062 Hash code: 45142406 ->PRGCHK: bdy curvature ratio at t= 4.0000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.398333 ; TG2= 0.400000 ; DTG= 1.667E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5700E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.398333 TO TG2= 0.400000 @ NSTEP 1062 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.90092400000003 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1065 TA= 4.00000E-01 CPU TIME= 1.45980E-02 SECONDS. DT= 5.89761E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.480548333334355 %check_save_state: izleft hours = 10.5116666666667 --> plasma_hash("gframe"): TA= 4.000000E-01 NSTEP= 1065 Hash code: 36256861 ->PRGCHK: bdy curvature ratio at t= 4.0250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.400000 ; TG2= 0.402500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8550E-03 SECONDS DATA R*BT AT EDGE: 4.6505E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.400000 TO TG2= 0.402500 @ NSTEP 1065 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 35= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 35= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.24896E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.025000E-01 NSTEP= 1070 Hash code: 63975562 ->PRGCHK: bdy curvature ratio at t= 4.0500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.402500 ; TG2= 0.405000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5930E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.402500 TO TG2= 0.405000 @ NSTEP 1070 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 35= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 35= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.24896E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1073 TA= 4.04269E-01 CPU TIME= 1.46950E-02 SECONDS. DT= 5.89761E-04 %tr_rfprep: rfxqlo setup done, cpu(s) = 1.84827900000005 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1075 TA= 4.05000E-01 CPU TIME= 1.42010E-02 SECONDS. DT= 1.40954E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.487088611111631 %check_save_state: izleft hours = 10.5052777777778 --> plasma_hash("gframe"): TA= 4.050000E-01 NSTEP= 1075 Hash code: 31707891 ->PRGCHK: bdy curvature ratio at t= 4.0750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.405000 ; TG2= 0.407500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7540E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.405000 TO TG2= 0.407500 @ NSTEP 1075 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.075000E-01 NSTEP= 1092 Hash code: 37059319 ->PRGCHK: bdy curvature ratio at t= 4.1000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.407500 ; TG2= 0.410000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4220E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.407500 TO TG2= 0.410000 @ NSTEP 1092 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.19386E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1097 TA= 4.08515E-01 CPU TIME= 1.41490E-02 SECONDS. DT= 2.27008E-04 %MFRCHK - LABEL "BALE0_SGF", # 32= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.52447E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.88026999999988 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1104 TA= 4.10000E-01 CPU TIME= 1.48380E-02 SECONDS. DT= 8.53353E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.494723055556278 %check_save_state: izleft hours = 10.4975000000000 --> plasma_hash("gframe"): TA= 4.100000E-01 NSTEP= 1104 Hash code: 49989736 ->PRGCHK: bdy curvature ratio at t= 4.1250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.410000 ; TG2= 0.412500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8300E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.410000 TO TG2= 0.412500 @ NSTEP 1104 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 34= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.17549E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 34= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.17549E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 34= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.17549E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.125000E-01 NSTEP= 1122 Hash code: 97195419 ->PRGCHK: bdy curvature ratio at t= 4.1500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.412500 ; TG2= 0.415000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5440E-03 SECONDS DATA R*BT AT EDGE: 4.6510E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.412500 TO TG2= 0.415000 @ NSTEP 1122 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 34= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.17549E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1125 TA= 4.13357E-01 CPU TIME= 1.42780E-02 SECONDS. DT= 2.94601E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= 1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.86718699999983 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1131 TA= 4.15000E-01 CPU TIME= 1.47670E-02 SECONDS. DT= 1.69977E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.502428055556265 %check_save_state: izleft hours = 10.4897222222222 --> plasma_hash("gframe"): TA= 4.150000E-01 NSTEP= 1131 Hash code: 38677343 ->PRGCHK: bdy curvature ratio at t= 4.1750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.415000 ; TG2= 0.417500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8310E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.415000 TO TG2= 0.417500 @ NSTEP 1131 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.85508E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.85508E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.85508E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.175000E-01 NSTEP= 1144 Hash code: 90962452 ->PRGCHK: bdy curvature ratio at t= 4.2000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.417500 ; TG2= 0.420000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4410E-03 SECONDS DATA R*BT AT EDGE: 4.6496E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.417500 TO TG2= 0.420000 @ NSTEP 1144 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.85508E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.85508E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1151 TA= 4.19973E-01 CPU TIME= 1.51070E-02 SECONDS. DT= 2.71409E-05 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.84337000000005 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1152 TA= 4.20000E-01 CPU TIME= 1.44270E-02 SECONDS. DT= 2.71409E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = T %check_save_state: check at wall_hours = 0.509835555556492 %check_save_state: izleft hours = 10.4825000000000 %wrstf: start call wrstf. %wrstf: open new restart file:138506Z29RS.DAT %wrstf: open138506Z29RS.DAT_NEW, status= 0 %wrstf: record, ier= 1 (ier=1, OK) %wrstf: psload_save %ps_rezone_chk: no rezone operator available (no MHD equilibrium). %ps_rezone_chk: no rezone operator available (no MHD equilibrium). %wrstf: write marker file. %wrstf: transp_rplot_state_backup % RESTART RECORD WRITTEN AT TA= 4.2000000E-01 arrays allocated in pt_diff_data_init arrays allocated in ptsolver_data_init %WRSTF: virtual memory size = 1.384E+03 MB. --> plasma_hash("gframe"): TA= 4.200000E-01 NSTEP= 1152 Hash code: 82156065 ->PRGCHK: bdy curvature ratio at t= 4.2250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.420000 ; TG2= 0.422500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7080E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.420000 TO TG2= 0.422500 @ NSTEP 1152 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.14895E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.14895E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.14895E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.14895E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.225000E-01 NSTEP= 1191 Hash code: 57278870 ->PRGCHK: bdy curvature ratio at t= 4.2500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.422500 ; TG2= 0.425000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5670E-03 SECONDS DATA R*BT AT EDGE: 4.6504E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.422500 TO TG2= 0.425000 @ NSTEP 1191 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.14895E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.14895E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.14895E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.14895E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.87344E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 2.14895E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 2.14895E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1202 TA= 4.24665E-01 CPU TIME= 1.48010E-02 SECONDS. DT= 3.23470E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87713200000007 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1204 TA= 4.25000E-01 CPU TIME= 1.43780E-02 SECONDS. DT= 1.30394E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.518918888889857 %check_save_state: izleft hours = 10.4733333333333 --> plasma_hash("gframe"): TA= 4.250000E-01 NSTEP= 1204 Hash code: 41886996 ->PRGCHK: bdy curvature ratio at t= 4.2750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.425000 ; TG2= 0.427500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8820E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.425000 TO TG2= 0.427500 @ NSTEP 1204 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 30= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 30= -1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 30= -1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 30= -1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 30= -1.85508E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.275000E-01 NSTEP= 1236 Hash code: 116210763 ->PRGCHK: bdy curvature ratio at t= 4.3000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.427500 ; TG2= 0.430000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5610E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.427500 TO TG2= 0.430000 @ NSTEP 1236 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 30= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 30= -1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 30= -1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 30= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.78161E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 30= -1.85508E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 30= -1.85508E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1242 TA= 4.29298E-01 CPU TIME= 1.47320E-02 SECONDS. DT= 3.33125E-04 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.56120E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SRC", # 31= 1.79998E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_RC_D", # 31= 1.79998E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.87472000000002 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1245 TA= 4.30000E-01 CPU TIME= 1.37430E-02 SECONDS. DT= 3.98479E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.527256388889782 %check_save_state: izleft hours = 10.4650000000000 --> plasma_hash("gframe"): TA= 4.300000E-01 NSTEP= 1245 Hash code: 119299245 ->PRGCHK: bdy curvature ratio at t= 4.3250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.430000 ; TG2= 0.432500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6190E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.430000 TO TG2= 0.432500 @ NSTEP 1245 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.63467E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.325000E-01 NSTEP= 1266 Hash code: 114248702 ->PRGCHK: bdy curvature ratio at t= 4.3500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.432500 ; TG2= 0.435000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5830E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.432500 TO TG2= 0.435000 @ NSTEP 1266 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.63467E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.63467E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.83301399999982 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1276 TA= 4.35000E-01 CPU TIME= 1.35030E-02 SECONDS. DT= 2.27398E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.534879166666542 %check_save_state: izleft hours = 10.4572222222222 --> plasma_hash("gframe"): TA= 4.350000E-01 NSTEP= 1276 Hash code: 117466258 ->PRGCHK: bdy curvature ratio at t= 4.3750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.435000 ; TG2= 0.437500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6850E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.435000 TO TG2= 0.437500 @ NSTEP 1276 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 36= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 36= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= 1.17549E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.375000E-01 NSTEP= 1287 Hash code: 92082912 ->PRGCHK: bdy curvature ratio at t= 4.4000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.437500 ; TG2= 0.440000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3580E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.437500 TO TG2= 0.440000 @ NSTEP 1287 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 36= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 36= 1.17549E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= 1.17549E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.84479399999987 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1297 TA= 4.40000E-01 CPU TIME= 1.34890E-02 SECONDS. DT= 5.35109E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.541813333334176 %check_save_state: izleft hours = 10.4502777777778 --> plasma_hash("gframe"): TA= 4.400000E-01 NSTEP= 1297 Hash code: 93620324 ->PRGCHK: bdy curvature ratio at t= 4.4250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.440000 ; TG2= 0.442500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9200E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.440000 TO TG2= 0.442500 @ NSTEP 1297 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.96528E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.96528E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.96528E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.96528E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.96528E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.96528E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.425000E-01 NSTEP= 1316 Hash code: 37678871 ->PRGCHK: bdy curvature ratio at t= 4.4500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.442500 ; TG2= 0.445000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4650E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.442500 TO TG2= 0.445000 @ NSTEP 1316 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 31= 1.96528E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.96528E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.96528E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.96528E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.81052199999999 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1325 TA= 4.45000E-01 CPU TIME= 1.42900E-02 SECONDS. DT= 4.05821E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.549254722222940 %check_save_state: izleft hours = 10.4430555555556 --> plasma_hash("gframe"): TA= 4.450000E-01 NSTEP= 1325 Hash code: 66670565 ->PRGCHK: bdy curvature ratio at t= 4.4750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.445000 ; TG2= 0.447500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6600E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.445000 TO TG2= 0.447500 @ NSTEP 1325 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 34= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.23060E-38 RESET TO ZERO --> plasma_hash("gframe"): TA= 4.475000E-01 NSTEP= 1331 Hash code: 106976593 ->PRGCHK: bdy curvature ratio at t= 4.5000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.447500 ; TG2= 0.450000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5640E-03 SECONDS DATA R*BT AT EDGE: 4.6494E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.447500 TO TG2= 0.450000 @ NSTEP 1331 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 34= 1.23060E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 34= 1.23060E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1333 TA= 4.48873E-01 CPU TIME= 1.35150E-02 SECONDS. DT= 7.90831E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 2.02038E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 2.02038E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.79318599999988 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1335 TA= 4.50000E-01 CPU TIME= 1.41710E-02 SECONDS. DT= 3.70318E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.555673333333289 %check_save_state: izleft hours = 10.4366666666667 --> plasma_hash("gframe"): TA= 4.500000E-01 NSTEP= 1335 Hash code: 79777516 ->PRGCHK: bdy curvature ratio at t= 4.5250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.450000 ; TG2= 0.452500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6370E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.450000 TO TG2= 0.452500 @ NSTEP 1335 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.46937E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.46937E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.46937E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.46937E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1341 TA= 4.52222E-01 CPU TIME= 1.37540E-02 SECONDS. DT= 2.78092E-04 --> plasma_hash("gframe"): TA= 4.525000E-01 NSTEP= 1342 Hash code: 54597200 ->PRGCHK: bdy curvature ratio at t= 4.5500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.452500 ; TG2= 0.455000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.3380E-03 SECONDS DATA R*BT AT EDGE: 4.6507E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.452500 TO TG2= 0.455000 @ NSTEP 1342 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %MFRCHK - LABEL "BALE0_SGF", # 39= -1.79998E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.79998E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 39= -1.79998E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 39= -1.79998E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1347 TA= 4.54500E-01 CPU TIME= 1.42850E-02 SECONDS. DT= 4.07350E-04 %MFRCHK - LABEL "BALE0_SGF", # 29= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 29= 1.21223E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.76344100000006 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1349 TA= 4.55000E-01 CPU TIME= 1.47340E-02 SECONDS. DT= 9.29332E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.562716666667711 %check_save_state: izleft hours = 10.4294444444444 --> plasma_hash("gframe"): TA= 4.550000E-01 NSTEP= 1349 Hash code: 2388402 ->PRGCHK: bdy curvature ratio at t= 4.5750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.455000 ; TG2= 0.457500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9310E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.455000 TO TG2= 0.457500 @ NSTEP 1349 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 32= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 32= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= -1.26733E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1362 TA= 4.56886E-01 CPU TIME= 1.47530E-02 SECONDS. DT= 2.19132E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.575000E-01 NSTEP= 1365 Hash code: 59126218 ->PRGCHK: bdy curvature ratio at t= 4.6000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.457500 ; TG2= 0.460000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4990E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.457500 TO TG2= 0.460000 @ NSTEP 1365 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 35= -1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.34080E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 35= -1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.34080E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1371 TA= 4.58859E-01 CPU TIME= 1.47310E-02 SECONDS. DT= 2.41045E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 37= 1.19386E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 37= 1.19386E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.89247599999999 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1376 TA= 4.60000E-01 CPU TIME= 1.46640E-02 SECONDS. DT= 1.94925E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.570478888889284 %check_save_state: izleft hours = 10.4216666666667 --> plasma_hash("gframe"): TA= 4.600000E-01 NSTEP= 1376 Hash code: 66531407 ->PRGCHK: bdy curvature ratio at t= 4.6250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.460000 ; TG2= 0.462500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9220E-03 SECONDS DATA R*BT AT EDGE: 4.6499E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.460000 TO TG2= 0.462500 @ NSTEP 1376 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 36= 1.48774E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= 1.48774E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 36= 1.48774E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 36= 1.48774E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1383 TA= 4.61849E-01 CPU TIME= 1.45870E-02 SECONDS. DT= 3.45322E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.625000E-01 NSTEP= 1385 Hash code: 45553160 ->PRGCHK: bdy curvature ratio at t= 4.6500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.462500 ; TG2= 0.465000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5100E-03 SECONDS DATA R*BT AT EDGE: 4.6488E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.462500 TO TG2= 0.465000 @ NSTEP 1385 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 28= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 28= -1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1388 TA= 4.63536E-01 CPU TIME= 1.45150E-02 SECONDS. DT= 3.45322E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 30= -1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.88711399999988 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1393 TA= 4.65000E-01 CPU TIME= 1.44280E-02 SECONDS. DT= 9.10182E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.578069166667319 %check_save_state: izleft hours = 10.4141666666667 --> plasma_hash("gframe"): TA= 4.650000E-01 NSTEP= 1393 Hash code: 80891833 ->PRGCHK: bdy curvature ratio at t= 4.6750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.465000 ; TG2= 0.467500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8290E-03 SECONDS DATA R*BT AT EDGE: 4.6493E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.465000 TO TG2= 0.467500 @ NSTEP 1393 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.675000E-01 NSTEP= 1408 Hash code: 49636440 ->PRGCHK: bdy curvature ratio at t= 4.7000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.467500 ; TG2= 0.470000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5070E-03 SECONDS DATA R*BT AT EDGE: 4.6498E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.467500 TO TG2= 0.470000 @ NSTEP 1408 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1416 TA= 4.69577E-01 CPU TIME= 1.42290E-02 SECONDS. DT= 2.59685E-04 %MFRCHK - LABEL "BALE0_SGF", # 32= 1.70814E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 32= 1.70814E-38 RESET TO ZERO %tr_rfprep: rfxqlo setup done, cpu(s) = 1.81518400000004 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1418 TA= 4.70000E-01 CPU TIME= 1.47090E-02 SECONDS. DT= 1.79114E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.585463611111209 %check_save_state: izleft hours = 10.4066666666667 --> plasma_hash("gframe"): TA= 4.700000E-01 NSTEP= 1418 Hash code: 35109157 ->PRGCHK: bdy curvature ratio at t= 4.7250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.470000 ; TG2= 0.472500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8200E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.470000 TO TG2= 0.472500 @ NSTEP 1418 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 30= -1.68977E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.68977E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 30= -1.68977E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.68977E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.725000E-01 NSTEP= 1430 Hash code: 116402979 ->PRGCHK: bdy curvature ratio at t= 4.7500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.472500 ; TG2= 0.475000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5290E-03 SECONDS DATA R*BT AT EDGE: 4.6508E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.472500 TO TG2= 0.475000 @ NSTEP 1430 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 30= -1.68977E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.68977E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 30= -1.68977E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 30= -1.68977E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1438 TA= 4.74234E-01 CPU TIME= 1.49010E-02 SECONDS. DT= 2.16728E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.88621000000012 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1442 TA= 4.75000E-01 CPU TIME= 1.48520E-02 SECONDS. DT= 1.15995E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.593116944444773 %check_save_state: izleft hours = 10.3991666666667 --> plasma_hash("gframe"): TA= 4.750000E-01 NSTEP= 1442 Hash code: 115013565 ->PRGCHK: bdy curvature ratio at t= 4.7750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.475000 ; TG2= 0.477500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9000E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.475000 TO TG2= 0.477500 @ NSTEP 1442 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.775000E-01 NSTEP= 1461 Hash code: 23330450 ->PRGCHK: bdy curvature ratio at t= 4.8000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.477500 ; TG2= 0.480000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7670E-03 SECONDS DATA R*BT AT EDGE: 4.6491E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.477500 TO TG2= 0.480000 @ NSTEP 1461 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.24896E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.24896E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1467 TA= 4.78733E-01 CPU TIME= 1.47480E-02 SECONDS. DT= 2.05491E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 42= -1.45100E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 42= -1.45100E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.84279999999990 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1474 TA= 4.80000E-01 CPU TIME= 1.47970E-02 SECONDS. DT= 3.75126E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.601384444445557 %check_save_state: izleft hours = 10.3908333333333 --> plasma_hash("gframe"): TA= 4.800000E-01 NSTEP= 1474 Hash code: 49284633 ->PRGCHK: bdy curvature ratio at t= 4.8250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.480000 ; TG2= 0.482500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8660E-03 SECONDS DATA R*BT AT EDGE: 4.6493E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.480000 TO TG2= 0.482500 @ NSTEP 1474 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.35917E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.35917E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.825000E-01 NSTEP= 1501 Hash code: 9096036 ->PRGCHK: bdy curvature ratio at t= 4.8500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.482500 ; TG2= 0.485000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.4930E-03 SECONDS DATA R*BT AT EDGE: 4.6495E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.482500 TO TG2= 0.485000 @ NSTEP 1501 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1503 TA= 4.83005E-01 CPU TIME= 1.46890E-02 SECONDS. DT= 2.52366E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 35= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 35= -1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 35= -1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.85273400000005 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1511 TA= 4.85000E-01 CPU TIME= 1.43810E-02 SECONDS. DT= 2.28704E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.609748333334210 %check_save_state: izleft hours = 10.3825000000000 --> plasma_hash("gframe"): TA= 4.850000E-01 NSTEP= 1511 Hash code: 116776777 ->PRGCHK: bdy curvature ratio at t= 4.8750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.485000 ; TG2= 0.487500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.7070E-03 SECONDS DATA R*BT AT EDGE: 4.6502E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.485000 TO TG2= 0.487500 @ NSTEP 1511 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.28570E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 31= 1.28570E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 31= 1.28570E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1517 TA= 4.86587E-01 CPU TIME= 1.43770E-02 SECONDS. DT= 2.76732E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.875000E-01 NSTEP= 1521 Hash code: 30365573 ->PRGCHK: bdy curvature ratio at t= 4.9000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.487500 ; TG2= 0.490000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6590E-03 SECONDS DATA R*BT AT EDGE: 4.6509E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.487500 TO TG2= 0.490000 @ NSTEP 1521 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.36936E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.36936E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1524 TA= 4.88330E-01 CPU TIME= 1.48130E-02 SECONDS. DT= 2.76732E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 41= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.52447E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 41= -1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 41= -1.52447E-38 RESET TO ZERO *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1530 TA= 4.89991E-01 CPU TIME= 1.41470E-02 SECONDS. DT= 9.41542E-06 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.77979000000005 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1531 TA= 4.90000E-01 CPU TIME= 1.46170E-02 SECONDS. DT= 1.03570E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.617684444445331 %check_save_state: izleft hours = 10.3744444444444 --> plasma_hash("gframe"): TA= 4.900000E-01 NSTEP= 1531 Hash code: 67461559 ->PRGCHK: bdy curvature ratio at t= 4.9250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.490000 ; TG2= 0.492500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.8230E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.490000 TO TG2= 0.492500 @ NSTEP 1531 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 46= 1.50610E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.50610E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1561 TA= 4.91704E-01 CPU TIME= 1.47970E-02 SECONDS. DT= 1.80723E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.34080E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.925000E-01 NSTEP= 1565 Hash code: 77988952 ->PRGCHK: bdy curvature ratio at t= 4.9500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.492500 ; TG2= 0.495000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5200E-03 SECONDS DATA R*BT AT EDGE: 4.6503E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.492500 TO TG2= 0.495000 @ NSTEP 1565 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.34080E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.34080E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1569 TA= 4.93587E-01 CPU TIME= 1.48830E-02 SECONDS. DT= 2.91056E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.52447E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.52447E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %tr_rfprep: rfxqlo setup done, cpu(s) = 1.88106900000002 lun for writing 138506Z29_A1_13_torica.inp = 41 toric4_fpdrive: ncpu = 1 %toric4_fpdrive: starting TORIC4/5, messages to: 138506Z29_A1_13_toric5.msgs toric4_fpdrive: call trmpi_requestor !FILE_OPEN_READ 41, 138506Z29_A1_13_torica.inp %tr_rf_bcorr: no power deposited, ICRF antenna # 1 %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1574 TA= 4.95000E-01 CPU TIME= 1.48800E-02 SECONDS. DT= 2.48527E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.626724166666918 %check_save_state: izleft hours = 10.3655555555556 --> plasma_hash("gframe"): TA= 4.950000E-01 NSTEP= 1574 Hash code: 18885709 ->PRGCHK: bdy curvature ratio at t= 4.9750E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.495000 ; TG2= 0.497500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9070E-03 SECONDS DATA R*BT AT EDGE: 4.6502E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.495000 TO TG2= 0.497500 @ NSTEP 1574 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 46= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.21223E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 46= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.21223E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 46= 1.21223E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 46= 1.21223E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 4.975000E-01 NSTEP= 1585 Hash code: 48131630 ->PRGCHK: bdy curvature ratio at t= 5.0000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.497500 ; TG2= 0.500000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.5700E-03 SECONDS DATA R*BT AT EDGE: 4.6501E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.497500 TO TG2= 0.500000 @ NSTEP 1585 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1587 TA= 4.97997E-01 CPU TIME= 1.47030E-02 SECONDS. DT= 2.48527E-04 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.36936E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.36936E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 2.36936E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 2.36936E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1596 TA= 5.00000E-01 CPU TIME= 1.48430E-02 SECONDS. DT= 1.62076E-05 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.629015277778308 %check_save_state: izleft hours = 10.3633333333333 --> plasma_hash("gframe"): TA= 5.000000E-01 NSTEP= 1596 Hash code: 104666399 ->PRGCHK: bdy curvature ratio at t= 5.0250E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.500000 ; TG2= 0.502500 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9120E-03 SECONDS DATA R*BT AT EDGE: 4.6506E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.500000 TO TG2= 0.502500 @ NSTEP 1596 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! --> plasma_hash("gframe"): TA= 5.025000E-01 NSTEP= 1626 Hash code: 78615118 ->PRGCHK: bdy curvature ratio at t= 5.0500E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.502500 ; TG2= 0.505000 ; DTG= 2.500E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.6060E-03 SECONDS DATA R*BT AT EDGE: 4.6511E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.502500 TO TG2= 0.505000 @ NSTEP 1626 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.26733E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.26733E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %fi_finish: enter *** FULL NEUTRAL SOURCE CALCULATION PERFORMED *** NSTEP= 1636 TA= 5.05000E-01 CPU TIME= 1.49470E-02 SECONDS. DT= 1.76395E-04 %check_save_state: nbflag = T %check_save_state: iwrite_now = F %check_save_state: check at wall_hours = 0.631885555555982 %check_save_state: izleft hours = 10.3602777777778 --> plasma_hash("gframe"): TA= 5.050000E-01 NSTEP= 1636 Hash code: 26289845 ->PRGCHK: bdy curvature ratio at t= 5.1000E-01 seconds is: 2.4502E-01 % MHDEQ: TG1= 0.505000 ; TG2= 0.510000 ; DTG= 5.000E-03 * MHD EQUILIBRIUM CALCULATED, CPU TIME = 4.9280E-03 SECONDS DATA R*BT AT EDGE: 4.6500E+01 ->EQBDY_CHECK: last flux surface curvature ratio is: 2.4502E-01 %get_rygrid: no grids for Psi(R,Y) % GFRAME - GEOMETRY TIMESTEP TG1= 0.505000 TO TG2= 0.510000 @ NSTEP 1636 GFRAME TG2 MOMENTS CHECKSUM: 9.0671281445355D+03 %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.37753E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.37753E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.37753E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.37753E-38 RESET TO ZERO %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %POHCAL warning: q input AND Te prediction, POH < 0 suppressed! %MFRCHK - LABEL "BALE0_SGF", # 45= 1.37753E-38 RESET TO ZERO %MFRCHK - LABEL "BALE0_GF_D", # 45= 1.37753E-38 RESET TO ZERO ual_close_pulse: [UALLowlevelException = Cannot find context -1 in store] tr_ids_eq_close: can not close IMAS output files 4.2 Call trmpi_end (NORMAL EXIT) trmpi_end2 -I- __MPI undefined 4.2 TERMINATE THE RUN (NORMAL EXIT) CPU TIME USED (hours): 5.05245E-01 %kill_nubeam_server: no server READY file found. ------------ stderr ---------------- (mpi_share_env) process myid= 0 cwd: /local/tr_bleard/transp_compute/NSTX/138506Z29 ==>runtrx: TRANSP run successful ==========(runtrx)====================== ==========TRANSP output conversion====== date: Mon Nov 18 18:48:29 EST 2024 ( mccune019.pppl.gov ) ==========(runtrx)====================== srart tr_finish_mpi.pl false pppl.gov 138506Z29 NSTX ---------------> starting: plotcon 138506Z29 2024/11/18:18:48:29 %initcpl: MDS_CACHE enabled. %PoPlot -- reading .PLN files %POPLT2-- PROCESSING RUN 138506Z29 SHOT NO. 138506 EXPECT 290 SCALAR FCNS, 714 PROFILE FCNS OF TIME "MF" FILE RECORD SIZE = 50 WORDS (FLOATING PT) dmg_datbuf_expand call from dmgini_sized: isize= 0 138506Z29MF.PLN size = 288M %initcpl: MDS_CACHE enabled. [mds_cache_disable: MDS+ cache disabled.] dmg_datbuf_expand call from dmgini_sized: isize= 0 (retry folding filename to lowercase) ...reading TF.PLN header data... cdfcon: NETcdf file datestamp : Mon Nov 18 18:48:46 2024 build_date: call getenv build_date: call ufopen xshare_build.dat cdfcon: Transp common build date : Fri May 3 15:19:16 EDT Define Dimensions 11 define Scalar Fct 290 Define Multi Graphs 281 Write Profiles 714 X 1 1 50 XB 2 2 50 RMJSYM 3 7 205 RMAJM 4 9 101 MCINDX 5 10 220 ILIM 6 12 202 XGRID_NPHI 7 214 3 RGRID 8 665 51 ZGRID 9 666 51 PSIRZ 10 667 2601 %dmgxot_spredm: non-monotonic X axis: #increasing steps: 175212 avg & max steps: 1.2124E-03 2.9390E-03 #decreasing steps: 260772 avg & max steps: 8.1462E-04 1.6424E-03 #zero steps: 531216 B_FIELD 11 668 7803 %dmgxot_spredm: non-monotonic X axis: #increasing steps: 1240211 avg & max steps: 5.6385E-02 7.4519E-01 #decreasing steps: 609371 avg & max steps: 1.1477E-01 3.8495E+00 #zero steps: 1052762 read NF File : 291 290 Write Multigraph: 281 ...readback test of .CDF file... 1287 variables, 13 dimensions 15 att ...header check SUCCESSFUL; now check data. ...check profile data... plotcon: CDF files in /local/tr_bleard/transp_compute/NSTX/138506Z29 /local/tr_bleard/transp_compute/NSTX/138506Z29/138506Z29.CDF /local/tr_bleard/transp_compute/NSTX/138506Z29/138506Z29PH.CDF %targz_pseq: no directory: 138506Z29_replay (normal exit) %targz_solv: in /local/tr_bleard/transp_compute/NSTX/138506Z29 on host mccune019 %targz_solv: no TGLF debug info found (normal exit) %targz_solv: no TGLF debug info found (normal exit) --------------->plotcon: normal exit. 2024/11/18:18:48:49 ==>runtrx: TRANSP postprocessing OK ==========(runtrx)====================== ==========TRANSP add to MDSplus ======== date: Mon Nov 18 18:48:49 EST 2024 ( mccune019.pppl.gov ) ==========(runtrx)====================== %mdsplot: call INITPL %initcpl: MDS_CACHE enabled. %mdsplot: call getenv %mdsplot: call ufopen xshare_build.dat %mdsplot: MDSplus controls cleared, server set to local. mds_conopn: option = 4 1385062629 TRANSP_NSTX ...connecting to server: TRANSPGRID.PPPL.GOV ...tcl("EDIT TRANSP_NSTX/SHOT=1385062629") dmg_datbuf_expand call from dmgini_sized: isize= 0 ... reading NetCDF header data ... cdfhrd: size(time) = 2048 cdfhrd: size(time3) = 2048 MDS 1D Put OK MDS 2D Put OK MDS MG Put OK delete node .TRDATA tcl("write") ...mdsplot: normal exit. ==========(runtrx)====================== ==========TRANSP finish and cleanup===== date: Mon Nov 18 18:49:32 EST 2024 ( mccune019.pppl.gov ) ==========(runtrx)====================== %finishup -I- pppl.gov production run %finishup: copying TRANSP permanent output files to /u/tr_bleard/transp/result/NSTX.10 acsort.py: No match. mv 138506Z29.CDF /u/tr_bleard/transp/result/NSTX.10/138506Z29.CDF mv 138506Z29ex.for /u/tr_bleard/transp/result/NSTX.10/138506Z29ex.for mv 138506Z29_mmm.nml /u/tr_bleard/transp/result/NSTX.10/138506Z29_mmm.nml mv 138506Z29PH.CDF /u/tr_bleard/transp/result/NSTX.10/138506Z29PH.CDF mv 138506Z29_pt.nml /u/tr_bleard/transp/result/NSTX.10/138506Z29_pt.nml mv 138506Z29TR.DAT /u/tr_bleard/transp/result/NSTX.10/138506Z29TR.DAT mv 138506Z29TR.INF /u/tr_bleard/transp/result/NSTX.10/138506Z29TR.INF %finishup: retaining 138506Z29tr.log mv 138506Z29TR.MSG /u/tr_bleard/transp/result/NSTX.10/138506Z29TR.MSG mv 138506Z29.yml /u/tr_bleard/transp/result/NSTX.10/138506Z29.yml rm: No match. %finishup -I- both the GRID and the PPPL flags are set. /l/transpgrid/pshare/qshare/138506Z29_NSTX.qarc status 0 ==========(runtrx)====================== ==========>runtrx normal exit<========== date: Mon Nov 18 18:49:34 EST 2024 ( mccune019.pppl.gov ) ==========>runtrx runsite = pppl.gov<======