Photos

From LTX Wiki
Jump to: navigation, search

A gallery of photographic documentation from diagnostic installation projects, etc.

See also: Google Drive Photos , LTX Installation , LTX 2008-2012 , LTX 2013-2016

Photos also stored on the cluster in /p/ltxdata/photos

In-Vessel - SCs + FLs + TA + REPA (full).jpg Spare YG Cap Box (internal).jpg

Toroidal Array Gallery

Assembly

  • TA Assy 00 - Electrostatic Shield Fabrication

  • TA Assy 0 - Bare 1D Mirnov

  • TA Assy 1 - Mirnov on Back Plate (front)

  • TA Assy 1 - Mirnov on Back Plate (obverse)

  • TA Assy 1 - Mirnov on Back Plate w #0 screws (front)

  • TA Assy 2 - Lead tube restraint strap

  • TA Assy 2 - Lead tube strap welds 1

  • TA Assy 2 - Lead tube strap welds 2

  • TA Assy 2 - Lead tube strap welds complete

  • TA Assy 2 - Lead tube strap welds complete

  • TA Assy 3a - Electrostatic shield outside corner welds

  • TA Assy 3b - Electrostatic shield inside corner welds

  • TA Assy 4a - Electrostatic shield positioning on back plate

  • TA Assy 4b - Electrostatic shield positioning on back plate

  • TA Assy 4c - Electrostatic shield top edge welds

  • TA Assy 4d - Electrostatic shield bottom edge welds

  • TA Assy 4e - Electrostatic shield all edge welds

  • TA Assy 5a - Captive #2 screws in place

  • TA Assy 5b - Captive #2 screws in place

  • TA Assy 6a - Front shield with mica insulator

  • TA Assy 6b - Front shield with mica insulator and countersunk screws

  • TA Assy 7a - Front shield mounted to back plate

  • TA Assy 7b - Front shield mounted to back plate

  • TA Assy 8 - Complete TA viewed from above

In-Vessel

  • Mirnov A (at mp)

  • Mirnov A (below mp)

  • Mirnovs P and A

  • Mirnov D 1

  • Mirnov D 2

  • Mirnov D 3

  • Mirnov D 4

  • Mirnov D 5

  • Mirnov D 6

  • Mirnov M

  • CD TA feedthru

  • CD lower feedthru connectors

  • OP feedthrus

Shell Eddy Sensors

Original Build

  • SES_lead_marking_example

  • SES - Cabling D-sub view

  • SES - Cabling full view

  • SES - Cabling Mil-C view

Installation

  • SES 1 - East Edge

  • SES 1-3 - East D-sub

  • SES 2&3 - East Upper & Midplane

  • SES 5&6 - West Midplane & Upper

  • SES 5-7 - West D-sub

  • SES 7 - West Edge

Improved Construction (EUx and NMx only)

  • SES - New EUx leads 1 (pairwise insulation)

  • SES - New EUx leads 2 (braided shield)

  • SES - New EUx leads 3 (strain relief)

  • SES - New EUx leads 4 (outer insulation)

REPA Assembly

Old Build (pre-2017)

  • Voltage divider switchbox

New Build (2017-2018)

  • Mod1, paint marked

  • Mod1, coil lead broken during assembly

  • Mod1, inner (relative to tube) triplet

  • Mod1, full double-triplet assembly

  • Mod2, empty

  • Mod2, populated

  • Mod2, paint marked

  • Step 1 of machine-side REPA shield insulation assembly

  • Step 2 of machine-side REPA shield insulation assembly

  • Step 3 of machine-side REPA shield insulation assembly

  • Step 4 of machine-side REPA shield insulation assembly

  • Step 5 of machine-side REPA shield insulation assembly

  • Step 6 of machine-side REPA shield insulation assembly

  • Connector-side REPA cable buildup for shield (single-tube)

  • Connector-side REPA cable buildup for shield (double-tube)

  • In-vessel view of innermost top re-entrant tube

  • In-vessel view of innermost top re-entrant tube with ex-vessel tension applied

  • In-vessel view of LFS re-entrant tubes and proximity to saddle coils

  • In-vessel view of innermost top re-entrant tube

Diamagnetic Loop

Old Documentation

  • Sept. 2008 in-vessel diamagnetic loop records

Compensation and Acquisition

  • Voltage divider switchbox

  • Compensation box (inputs)

  • Compensation box (output)

  • Compensation box (internal)

  • Shielded compensation coil

  • Shielded compensation coil connector

  • Unshielded compensation coil

  • Unshielded compensation coil connector

RTDs

  • RTD calibration records (p1)

  • RTD calibration records (p2)

  • Beam dump RTD location records

  • Beam dump extension RTD location records

  • Beam scraper RTD calibration IDs

  • Beam scraper RTD position records

  • RTDs on back of beam dump

  • RTDs on back of beam dump

  • RTDs mounted to center-stack in-vessel under heat shield

  • RTDs mounted to center-stack in-vessel under heat shield (#2)

  • RTDs mounted to center-stack in-vessel under heat shield (#3)

  • RTDs mounted to center-stack in-vessel under heat shield (#4)

  • In-vessel for center-stack RTDs

  • RTD cabling in terminal box (north wall of test cell)

  • RTD cabling in terminal box (north wall of test cell)

Neutral Beam

Beam Dump Plate

  • RTD location records

  • Extension RTD location records

  • Support bracket records

  • RTD mounting

  • RTD mounting

Integrators

  • Front panel of E1939 showing timing and integrator modules

  • Schematics for E1939 timing module

  • Schematics for E1939 integrator module

  • Front panel of D-LTX-133 integrator

Capacitor banks

  • Green bank capacitors & rails

  • External view of spare Yellow/Green cap box

  • Internal view of spare Yellow/Green cap box

  • Close view of spare Yellow/Green cap box capacitors


Retrieved from "http://ltxwiki.pppl.gov/index.php?title=Photos&oldid=775"